commit 90592c1e43aaea1d02ef309a00e9215f30624dd6
Author: Jiri Slaby <jslaby@suse.cz>
Date: Mon Nov 23 14:04:07 2015 +0100
Linux 3.12.51
commit 5f2f951264d00b7abbba4ce95ead10d5ff25c0da
Author: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Date: Fri Aug 22 13:27:34 2014 -0700
x86/mm/hotplug: Modify PGD entry when removing memory
commit 9661d5bcd058fe15b4138a00d96bd36516134543 upstream.
When hot-adding/removing memory, sync_global_pgds() is called
for synchronizing PGD to PGD entries of all processes MM. But
when hot-removing memory, sync_global_pgds() does not work
correctly.
At first, sync_global_pgds() checks whether target PGD is none
or not. And if PGD is none, the PGD is skipped. But when
hot-removing memory, PGD may be none since PGD may be cleared by
free_pud_table(). So when sync_global_pgds() is called after
hot-removing memory, sync_global_pgds() should not skip PGD even
if the PGD is none. And sync_global_pgds() must clear PGD
entries of all processes MM.
Currently sync_global_pgds() does not clear PGD entries of all
processes MM when hot-removing memory. So when hot adding
memory which is same memory range as removed memory after
hot-removing memory, following call traces are shown:
kernel BUG at arch/x86/mm/init_64.c:206!
...
[<ffffffff815e0c80>] kernel_physical_mapping_init+0x1b2/0x1d2
[<ffffffff815ced94>] init_memory_mapping+0x1d4/0x380
[<ffffffff8104aebd>] arch_add_memory+0x3d/0xd0
[<ffffffff815d03d9>] add_memory+0xb9/0x1b0
[<ffffffff81352415>] acpi_memory_device_add+0x1af/0x28e
[<ffffffff81325dc4>] acpi_bus_device_attach+0x8c/0xf0
[<ffffffff813413b9>] acpi_ns_walk_namespace+0xc8/0x17f
[<ffffffff81325d38>] ? acpi_bus_type_and_status+0xb7/0xb7
[<ffffffff81325d38>] ? acpi_bus_type_and_status+0xb7/0xb7
[<ffffffff813418ed>] acpi_walk_namespace+0x95/0xc5
[<ffffffff81326b4c>] acpi_bus_scan+0x9a/0xc2
[<ffffffff81326bff>] acpi_scan_bus_device_check+0x8b/0x12e
[<ffffffff81326cb5>] acpi_scan_device_check+0x13/0x15
[<ffffffff81320122>] acpi_os_execute_deferred+0x25/0x32
[<ffffffff8107e02b>] process_one_work+0x17b/0x460
[<ffffffff8107edfb>] worker_thread+0x11b/0x400
[<ffffffff8107ece0>] ? rescuer_thread+0x400/0x400
[<ffffffff81085aef>] kthread+0xcf/0xe0
[<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140
[<ffffffff815fc76c>] ret_from_fork+0x7c/0xb0
[<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140
This patch clears PGD entries of all processes MM when
sync_global_pgds() is called after hot-removing memory
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 3434ce3d38e41b0c46c932b1b06913cb42197f9c
Author: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Date: Fri Aug 22 13:27:31 2014 -0700
x86/mm/hotplug: Pass sync_global_pgds() a correct argument in remove_pagetable()
commit 5255e0a79fcc0ff47b387af92bd9ef5729b1b859 upstream.
When hot-adding memory after hot-removing memory, following call
traces are shown:
kernel BUG at arch/x86/mm/init_64.c:206!
...
[<ffffffff815e0c80>] kernel_physical_mapping_init+0x1b2/0x1d2
[<ffffffff815ced94>] init_memory_mapping+0x1d4/0x380
[<ffffffff8104aebd>] arch_add_memory+0x3d/0xd0
[<ffffffff815d03d9>] add_memory+0xb9/0x1b0
[<ffffffff81352415>] acpi_memory_device_add+0x1af/0x28e
[<ffffffff81325dc4>] acpi_bus_device_attach+0x8c/0xf0
[<ffffffff813413b9>] acpi_ns_walk_namespace+0xc8/0x17f
[<ffffffff81325d38>] ? acpi_bus_type_and_status+0xb7/0xb7
[<ffffffff81325d38>] ? acpi_bus_type_and_status+0xb7/0xb7
[<ffffffff813418ed>] acpi_walk_namespace+0x95/0xc5
[<ffffffff81326b4c>] acpi_bus_scan+0x9a/0xc2
[<ffffffff81326bff>] acpi_scan_bus_device_check+0x8b/0x12e
[<ffffffff81326cb5>] acpi_scan_device_check+0x13/0x15
[<ffffffff81320122>] acpi_os_execute_deferred+0x25/0x32
[<ffffffff8107e02b>] process_one_work+0x17b/0x460
[<ffffffff8107edfb>] worker_thread+0x11b/0x400
[<ffffffff8107ece0>] ? rescuer_thread+0x400/0x400
[<ffffffff81085aef>] kthread+0xcf/0xe0
[<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140
[<ffffffff815fc76c>] ret_from_fork+0x7c/0xb0
[<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140
The patch-set fixes the issue.
This patch (of 2):
remove_pagetable() gets start argument and passes the argument
to sync_global_pgds(). In this case, the argument must not be
modified. If the argument is modified and passed to
sync_global_pgds(), sync_global_pgds() does not correctly
synchronize PGD to PGD entries of all processes MM since
synchronized range of memory [start, end] is wrong.
Unfortunately the start argument is modified in
remove_pagetable(). So this patch fixes the issue.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 49f9add06964fe16997aa34099e7bb31c39b0314
Author: Marcelo Leitner <mleitner@redhat.com>
Date: Mon Feb 23 11:17:13 2015 -0300
ipv6: addrconf: validate new MTU before applying it
commit 77751427a1ff25b27d47a4c36b12c3c8667855ac upstream.
Currently we don't check if the new MTU is valid or not and this allows
one to configure a smaller than minimum allowed by RFCs or even bigger
than interface own MTU, which is a problem as it may lead to packet
drops.
If you have a daemon like NetworkManager running, this may be exploited
by remote attackers by forging RA packets with an invalid MTU, possibly
leading to a DoS. (NetworkManager currently only validates for values
too small, but not for too big ones.)
The fix is just to make sure the new value is valid. That is, between
IPV6_MIN_MTU and interface's MTU.
Note that similar check is already performed at
ndisc_router_discovery(), for when kernel itself parses the RA.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 2b27106cd93020563185ea94618ea5019308226b
Author: Nadav Amit <namit@cs.technion.ac.il>
Date: Thu Sep 18 22:39:40 2014 +0300
KVM: x86: Use new is_noncanonical_address in _linearize
commit 4be4de7ef9fd3a4d77320d4713970299ffecd286 upstream.
Replace the current canonical address check with the new function which is
identical.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit e4bcfa44c82cb5bcfb44a4722c80686096c2e181
Author: Nadav Amit <namit@cs.technion.ac.il>
Date: Tue Oct 28 00:03:43 2014 +0200
KVM: x86: Fix far-jump to non-canonical check
commit 7e46dddd6f6cd5dbf3c7bd04a7e75d19475ac9f2 upstream.
Commit d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far
jumps") introduced a bug that caused the fix to be incomplete. Due to
incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit
segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may
not trigger #GP. As we know, this imposes a security problem.
In addition, the condition for two warnings was incorrect.
Fixes: d1442d85cc30ea75f7d399474ca738e0bc96f715
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
[Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 4c6a0e0edfe824edd777a496f46817b4fb465cbd
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Nov 10 09:14:39 2015 +0100
KVM: svm: unconditionally intercept #DB
commit cbdb967af3d54993f5814f1cee0ed311a055377d upstream.
This is needed to avoid the possibility that the guest triggers
an infinite stream of #DB exceptions (CVE-2015-8104).
VMX is not affected: because it does not save DR6 in the VMCS,
it already intercepts #DB unconditionally.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 0ccaee7be83eb288e8baacf6eebd4d8b8593f462
Author: Eric Northup <digitaleric@google.com>
Date: Tue Nov 3 18:03:53 2015 +0100
KVM: x86: work around infinite loop in microcode when #AC is delivered
commit 54a20552e1eae07aa240fa370a0293e006b5faed upstream.
It was found that a guest can DoS a host by triggering an infinite
stream of "alignment check" (#AC) exceptions. This causes the
microcode to enter an infinite loop where the core never receives
another interrupt. The host kernel panics pretty quickly due to the
effects (CVE-2015-5307).
Signed-off-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 97a51976c67e9dd841026a60f200f41c292fce37
Author: Nadav Amit <namit@cs.technion.ac.il>
Date: Mon Jul 21 14:37:24 2014 +0300
KVM: x86: Defining missing x86 vectors
commit c9cdd085bb75226879fd468b88e2e7eb467325b7 upstream.
Defining XE, XM and VE vector numbers.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit bd6e04696299ce030e8650a96151fe383c431dce
Author: David Howells <dhowells@redhat.com>
Date: Thu Oct 15 17:21:37 2015 +0100
KEYS: Fix crash when attempt to garbage collect an uninstantiated keyring
commit f05819df10d7b09f6d1eb6f8534a8f68e5a4fe61 upstream.
The following sequence of commands:
i=`keyctl add user a a @s`
keyctl request2 keyring foo bar @t
keyctl unlink $i @s
tries to invoke an upcall to instantiate a keyring if one doesn't already
exist by that name within the user's keyring set. However, if the upcall
fails, the code sets keyring->type_data.reject_error to -ENOKEY or some
other error code. When the key is garbage collected, the key destroy
function is called unconditionally and keyring_destroy() uses list_empty()
on keyring->type_data.link - which is in a union with reject_error.
Subsequently, the kernel tries to unlink the keyring from the keyring names
list - which oopses like this:
BUG: unable to handle kernel paging request at 00000000ffffff8a
IP: [<ffffffff8126e051>] keyring_destroy+0x3d/0x88
...
Workqueue: events key_garbage_collector
...
RIP: 0010:[<ffffffff8126e051>] keyring_destroy+0x3d/0x88
RSP: 0018:ffff88003e2f3d30 EFLAGS: 00010203
RAX: 00000000ffffff82 RBX: ffff88003bf1a900 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000003bfc6901 RDI: ffffffff81a73a40
RBP: ffff88003e2f3d38 R08: 0000000000000152 R09: 0000000000000000
R10: ffff88003e2f3c18 R11: 000000000000865b R12: ffff88003bf1a900
R13: 0000000000000000 R14: ffff88003bf1a908 R15: ffff88003e2f4000
...
CR2: 00000000ffffff8a CR3: 000000003e3ec000 CR4: 00000000000006f0
...
Call Trace:
[<ffffffff8126c756>] key_gc_unused_keys.constprop.1+0x5d/0x10f
[<ffffffff8126ca71>] key_garbage_collector+0x1fa/0x351
[<ffffffff8105ec9b>] process_one_work+0x28e/0x547
[<ffffffff8105fd17>] worker_thread+0x26e/0x361
[<ffffffff8105faa9>] ? rescuer_thread+0x2a8/0x2a8
[<ffffffff810648ad>] kthread+0xf3/0xfb
[<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2
[<ffffffff815f2ccf>] ret_from_fork+0x3f/0x70
[<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2
Note the value in RAX. This is a 32-bit representation of -ENOKEY.
The solution is to only call ->destroy() if the key was successfully
instantiated.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit f4562591c143cc272eab0d95be01dcca528627b9
Author: David Howells <dhowells@redhat.com>
Date: Fri Sep 25 16:30:08 2015 +0100
KEYS: Fix race between key destruction and finding a keyring by name
commit 94c4554ba07adbdde396748ee7ae01e86cf2d8d7 upstream.
There appears to be a race between:
(1) key_gc_unused_keys() which frees key->security and then calls
keyring_destroy() to unlink the name from the name list
(2) find_keyring_by_name() which calls key_permission(), thus accessing
key->security, on a key before checking to see whether the key usage is 0
(ie. the key is dead and might be cleaned up).
Fix this by calling ->destroy() before cleaning up the core key data -
including key->security.
Reported-by: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 9df1a69674639ed58d04437f8b66942ca0ef72cc
Author: Ilya Dryomov <idryomov@gmail.com>
Date: Sun Oct 11 19:38:00 2015 +0200
rbd: prevent kernel stack blow up on rbd map
commit 6d69bb536bac0d403d83db1ca841444981b280cd upstream.
Mapping an image with a long parent chain (e.g. image foo, whose parent
is bar, whose parent is baz, etc) currently leads to a kernel stack
overflow, due to the following recursion in the reply path:
rbd_osd_req_callback()
rbd_obj_request_complete()
rbd_img_obj_callback()
rbd_img_parent_read_callback()
rbd_obj_request_complete()
...
Limit the parent chain to 16 images, which is ~5K worth of stack. When
the above recursion is eliminated, this limit can be lifted.
Fixes: http://tracker.ceph.com/issues/12538
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
[idryomov@gmail.com: backport to 3.10: rbd_dev->opts, context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit a436ef7ab775920b278b3485526455a97736c4e3
Author: Ilya Dryomov <idryomov@gmail.com>
Date: Sun Oct 11 19:38:00 2015 +0200
rbd: don't leak parent_spec in rbd_dev_probe_parent()
commit 1f2c6651f69c14d0d3a9cfbda44ea101b02160ba upstream.
Currently we leak parent_spec and trigger a "parent reference
underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails.
The problem is we take the !parent out_err branch and that only drops
refcounts; parent_spec that would've been freed had we called
rbd_dev_unparent() remains and triggers rbd_warn() in
rbd_dev_parent_put() - at that point we have parent_spec != NULL and
parent_ref == 0, so counter ends up being -1 after the decrement.
Redo rbd_dev_probe_parent() to fix this.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[idryomov@gmail.com: backport to < 4.2: rbd_dev->opts]
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 6c2295ef2fb999cc0bed5e722e6eddcc56742e14
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Sat Oct 3 13:03:47 2015 -0700
ARM: orion: Fix DSA platform device after mvmdio conversion
commit d836ace65ee98d7079bc3c5afdbcc0e27dca20a3 upstream.
DSA expects the host_dev pointer to be the device structure associated
with the MDIO bus controller driver. First commit breaking that was
c3a07134e6aa ("mv643xx_eth: convert to use the Marvell Orion MDIO
driver"), and then, it got completely under the radar for a while.
Reported-by: Frans van de Wiel <fvdw@fvdw.eu>
Fixes: c3a07134e6aa ("mv643xx_eth: convert to use the Marvell Orion MDIO driver")
CC: stable@vger.kernel.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 9bc623ed14f83e2facf5ada94405d39c2a7be3fd
Author: Peter Hurley <peter@hurleysoftware.com>
Date: Wed Mar 11 09:19:16 2015 -0400
serial: 8250_dw: Fix deadlock in LCR workaround
commit 7fd6f640f2dd17dac6ddd6702c378cb0bb9cfa11 upstream.
Trying to write console output from within the serial console driver
while the port->lock is held causes recursive deadlock:
CPU 0
spin_lock_irqsave(&port->lock)
printk()
console_unlock()
call_console_drivers()
serial8250_console_write()
spin_lock_irqsave(&port->lock)
** DEADLOCK **
The 8250_dw i/o accessors try to write a console error message if the
LCR workaround was unsuccessful. When the port->lock is already held
(eg., when called from serial8250_set_termios()), this deadlocks.
Make the error message a FIXME until a general solution is devised.
Cc: Tim Kryger <tim.kryger@gmail.com>
Reported-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 30dd76cda0dccffcfa12f66913c6fe8b1b8ef396
Author: hayeswang <hayeswang@realtek.com>
Date: Wed Jul 9 14:52:51 2014 +0800
r8169: disable L23
commit b51ecea852b712618796d9eab8428a7d5f1f106f upstream.
For RTL8411, RTL8111G, RTL8402, RTL8105, and RTL8106, disable the feature
of entering the L2/L3 link state of the PCIe. When the nic starts the process
of entering the L2/L3 link state and the PCI reset occurs before the work
is finished, the work would be queued and continue after the next the PCI
reset occurs. This causes the device stays in L2/L3 link state, and the system
couldn't find the device.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit e63bb8210a3cd08aebd01c8dd55e18754ef9c4ea
Author: hayeswang <hayeswang@realtek.com>
Date: Tue Mar 11 15:11:59 2014 +0800
r8169: fix the incorrect tx descriptor version
commit f75761b6b5bf6277296505941d2dd8e11f9b5c35 upstream.
The tx descriptor version of RTL8111B belong to RTL_TD_0.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 9512204c65e6b7d2a30031e9f1594e099bb5a558
Author: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Mon Nov 11 14:16:16 2013 +0800
macmace: add missing platform_set_drvdata() in mace_probe()
commit 06a2feb9e3bd0d2d555ccb19607ff5583cfa03e8 upstream.
Add missing platform_set_drvdata() in mace_probe(), otherwise
calling platform_get_drvdata() in mac_mace_device_remove() may
returns NULL.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 8556e3af49a4bcc5bbfd3582a20a4e4163f8b455
Author: Marc Zyngier <marc.zyngier@arm.com>
Date: Tue Aug 5 16:44:39 2014 +0100
net: sun4i-emac: fix memory leak on bad packet
commit 2670cc699a66c4cf268cb3e3f6dfc325ec14f224 upstream.
Upon reception of a new frame, the emac driver checks for a number
of error conditions, and flag the packet as "bad" if any of these
are present. It then allocates a skb unconditionally, but only uses
it if the packet is "good". On the error path, the skb is just forgotten,
and the system leaks memory.
The piece of junk I have on my desk seems to encounter such error
frequently enough so that the box goes OOM after a couple of days,
which makes me grumpy.
Fix this by moving the allocation on the "good_packet" path (and
convert it to netdev_alloc_skb while we're at it).
Tested on a random Allwinner A20 board.
Cc: Stefan Roese <sr@denx.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 79f4fd24076c15fa1d59cc5dfa4646d550c3432b
Author: Yan, Zheng <zheng.z.yan@intel.com>
Date: Wed Jul 30 10:12:47 2014 +0800
ceph: fix kick_requests()
commit 282c105225ec3229f344c5fced795b9e1e634440 upstream.
__do_request() may unregister the request. So we should update
iterator 'p' before calling __do_request()
Signed-off-by: "Yan, Zheng" <zheng.z.yan@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 3057240acb6d1cc2f41d27f80f4a35bc85d949ae
Author: Yan, Zheng <ukernel@gmail.com>
Date: Thu Sep 11 14:25:18 2014 +0800
ceph: protect kick_requests() with mdsc->mutex
commit 656e4382948d4b2c81bdaf707f1400f53eff2625 upstream.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit fcd082c0640d0f8eef3d0d2a17a62c9446a77cf2
Author: Yan, Zheng <ukernel@gmail.com>
Date: Thu Sep 11 14:28:56 2014 +0800
ceph: make sure request isn't in any waiting list when kicking request.
commit 03974e8177b36d672eb59658f976f03cb77c1129 upstream.
we may corrupt waiting list if a request in the waiting list is kicked.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit dbbcea97ecdcee66c453ac4127cdf9bc6c8481a0
Author: Ani Sinha <ani@arista.com>
Date: Mon Sep 8 14:49:59 2014 -0700
net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland.
commit 6a2a2b3ae0759843b22c929881cc184b00cc63ff upstream.
Linux manpage for recvmsg and sendmsg calls does not explicitly mention setting msg_namelen to 0 when
msg_name passed set as NULL. When developers don't set msg_namelen member in msghdr, it might contain garbage
value which will fail the validation check and sendmsg and recvmsg calls from kernel will return EINVAL. This will
break old binaries and any code for which there is no access to source code.
To fix this, we set msg_namelen to 0 when msg_name is passed as NULL from userland.
Signed-off-by: Ani Sinha <ani@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 5d7af5b07a42bf3292ca1d359c89b1fdd0ef534e
Author: Vasily Averin <vvs@parallels.com>
Date: Mon May 5 00:17:48 2014 +0400
bridge: superfluous skb->nfct check in br_nf_dev_queue_xmit
commit aff09ce303f83bd370772349238482ae422a2341 upstream.
Currently bridge can silently drop ipv4 fragments.
If node have loaded nf_defrag_ipv4 module but have no nf_conntrack_ipv4,
br_nf_pre_routing defragments incoming ipv4 fragments
but nfct check in br_nf_dev_queue_xmit does not allow re-fragment combined
packet back, and therefore it is dropped in br_dev_queue_push_xmit without
incrementing of any failcounters
It seems the only way to hit the ip_fragment code in the bridge xmit
path is to have a fragment list whose reassembled fragments go over
the mtu. This only happens if nf_defrag is enabled. Thanks to
Florian Westphal for providing feedback to clarify this.
Defragmentation ipv4 is required not only in conntracks but at least in
TPROXY target and socket match, therefore #ifdef is changed from
NF_CONNTRACK_IPV4 to NF_DEFRAG_IPV4
Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 594a70103f91b679da58cefa6c6ca14f9afb5838
Author: Anton Blanchard <anton@samba.org>
Date: Sun Oct 20 10:26:20 2013 +1100
powerpc/pseries: Fix dedicated processor partition detection
commit 733187e29576041ceccf3b82092ca900fc929170 upstream.
commit f13c13a00512 (powerpc: Stop using non-architected shared_proc
field in lppaca) fixed a potential issue with shared/dedicated
partition detection. The old method of detection relied on an
unarchitected field (shared_proc), and this patch switched
to using something architected (a non zero yield_count).
Unfortunately the assertion in the Linux header that yield_count
is only non zero on shared processor partitions is not true. It
turns out dedicated processor partitions can increment yield_count
and as such we falsely detect dedicated partitions as shared.
Fix the comment, and switch back to using the old method.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 09f041d02b9d5407d544d6fd5a9026072c44956f
Author: Holger Eitzenberger <holger@eitzenberger.org>
Date: Mon Oct 28 14:42:33 2013 +0100
netfilter: xt_NFQUEUE: fix --queue-bypass regression
commit d954777324ffcba0b2f8119c102237426c654eeb upstream.
V3 of the NFQUEUE target ignores the --queue-bypass flag,
causing packets to be dropped when the userspace listener
isn't running.
Regression is in since 8746ddcf12bb26 ("netfilter: xt_NFQUEUE:
introduce CPU fanout").
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 2a3466123f0cb310c2201f0ae4ad3f72905b061b
Author: Sasha Levin <sasha.levin@oracle.com>
Date: Tue Sep 8 10:53:40 2015 -0400
RDS: verify the underlying transport exists before creating a connection
[ Upstream commit 74e98eb085889b0d2d4908f59f6e00026063014f ]
There was no verification that an underlying transport exists when creating
a connection, this would cause dereferencing a NULL ptr.
It might happen on sockets that weren't properly bound before attempting to
send a message, which will cause a NULL ptr deref:
[135546.047719] kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
[135546.051270] Modules linked in:
[135546.051781] CPU: 4 PID: 15650 Comm: trinity-c4 Not tainted 4.2.0-next-20150902-sasha-00041-gbaa1222-dirty #2527
[135546.053217] task: ffff8800835bc000 ti: ffff8800bc708000 task.ti: ffff8800bc708000
[135546.054291] RIP: __rds_conn_create (net/rds/connection.c:194)
[135546.055666] RSP: 0018:ffff8800bc70fab0 EFLAGS: 00010202
[135546.056457] RAX: dffffc0000000000 RBX: 0000000000000f2c RCX: ffff8800835bc000
[135546.057494] RDX: 0000000000000007 RSI: ffff8800835bccd8 RDI: 0000000000000038
[135546.058530] RBP: ffff8800bc70fb18 R08: 0000000000000001 R09: 0000000000000000
[135546.059556] R10: ffffed014d7a3a23 R11: ffffed014d7a3a21 R12: 0000000000000000
[135546.060614] R13: 0000000000000001 R14: ffff8801ec3d0000 R15: 0000000000000000
[135546.061668] FS: 00007faad4ffb700(0000) GS:ffff880252000000(0000) knlGS:0000000000000000
[135546.062836] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[135546.063682] CR2: 000000000000846a CR3: 000000009d137000 CR4: 00000000000006a0
[135546.064723] Stack:
[135546.065048] ffffffffafe2055c ffffffffafe23fc1 ffffed00493097bf ffff8801ec3d0008
[135546.066247] 0000000000000000 00000000000000d0 0000000000000000 ac194a24c0586342
[135546.067438] 1ffff100178e1f78 ffff880320581b00 ffff8800bc70fdd0 ffff880320581b00
[135546.068629] Call Trace:
[135546.069028] ? __rds_conn_create (include/linux/rcupdate.h:856 net/rds/connection.c:134)
[135546.069989] ? rds_message_copy_from_user (net/rds/message.c:298)
[135546.071021] rds_conn_create_outgoing (net/rds/connection.c:278)
[135546.071981] rds_sendmsg (net/rds/send.c:1058)
[135546.072858] ? perf_trace_lock (include/trace/events/lock.h:38)
[135546.073744] ? lockdep_init (kernel/locking/lockdep.c:3298)
[135546.074577] ? rds_send_drop_to (net/rds/send.c:976)
[135546.075508] ? __might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3795)
[135546.076349] ? __might_fault (mm/memory.c:3795)
[135546.077179] ? rds_send_drop_to (net/rds/send.c:976)
[135546.078114] sock_sendmsg (net/socket.c:611 net/socket.c:620)
[135546.078856] SYSC_sendto (net/socket.c:1657)
[135546.079596] ? SYSC_connect (net/socket.c:1628)
[135546.080510] ? trace_dump_stack (kernel/trace/trace.c:1926)
[135546.081397] ? ring_buffer_unlock_commit (kernel/trace/ring_buffer.c:2479 kernel/trace/ring_buffer.c:2558 kernel/trace/ring_buffer.c:2674)
[135546.082390] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749)
[135546.083410] ? trace_event_raw_event_sys_enter (include/trace/events/syscalls.h:16)
[135546.084481] ? do_audit_syscall_entry (include/trace/events/syscalls.h:16)
[135546.085438] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749)
[135546.085515] rds_ib_laddr_check(): addr 36.74.25.172 ret -99 node type -1
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 7c11e86ec40e52468fe65acf89c6da7a6d833a44
Author: Jason Wang <jasowang@redhat.com>
Date: Wed Aug 5 10:34:04 2015 +0800
virtio-net: drop NETIF_F_FRAGLIST
[ Upstream commit 48900cb6af4282fa0fb6ff4d72a81aa3dadb5c39 ]
virtio declares support for NETIF_F_FRAGLIST, but assumes
that there are at most MAX_SKB_FRAGS + 2 fragments which isn't
always true with a fraglist.
A longer fraglist in the skb will make the call to skb_to_sgvec overflow
the sg array, leading to memory corruption.
Drop NETIF_F_FRAGLIST so we only get what we can handle.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit e98b2397a2181f4d066342beb6a220e43c404e44
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Nov 9 17:51:23 2015 -0800
net: fix a race in dst_release()
[ Upstream commit d69bbf88c8d0b367cf3e3a052f6daadf630ee566 ]
Only cpu seeing dst refcount going to 0 can safely
dereference dst->flags.
Otherwise an other cpu might already have freed the dst.
Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 6651ab3cd17428ac02a53a2f0e90f089a203f03c
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Oct 2 16:54:31 2015 -0700
net: avoid NULL deref in inet_ctl_sock_destroy()
[ Upstream commit 8fa677d2706d325d71dab91bf6e6512c05214e37 ]
Under low memory conditions, tcp_sk_init() and icmp_sk_init()
can both iterate on all possible cpus and call inet_ctl_sock_destroy(),
with eventual NULL pointer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 1df1b617c4884a39627da12a64caf5755951b026
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Oct 2 16:54:31 2015 -0700
sit: fix sit0 percpu double allocations
[ Upstream commit 4ece9009774596ee3df0acba65a324b7ea79387c ]
sit0 device allocates its percpu storage twice :
- One time in ipip6_tunnel_init()
- One time in ipip6_fb_tunnel_init()
Thus we leak 48 bytes per possible cpu per network namespace dismantle.
ipip6_fb_tunnel_init() can be much simpler and does not
return an error, and should be called after register_netdev()
Note that ipip6_tunnel_clone_6rd() also needs to be called
after register_netdev() (calling ipip6_tunnel_init())
Fixes: ebe084aafb7e ("sit: Use ipip6_tunnel_init as the ndo_init function.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 33b0e82c27c542d0b7002f4f253b257ab37a2faf
Author: Bjørn Mork <bjorn@mork.no>
Date: Thu Oct 1 16:54:31 2015 -0700
qmi_wwan: fix entry for HP lt4112 LTE/HSPA+ Gobi 4G Module
[ Upstream commit 70910791731b5956171e1bfcad707766b8e18fee ]
The lt4112 is a HP branded Huawei me906e modem. Like other Huawei
modems, it does not have a fixed interface to function mapping.
Instead it uses a Huawei specific scheme: functions are mapped by
subclass and protocol.
However, the HP vendor ID is used for modems from many different
manufacturers using different schemes, so we cannot apply a generic
vendor rule like we do for the Huawei vendor ID.
Replace the previous lt4112 entry pointing to an arbitrary interface
number with a device specific subclass + protocol match.
Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch>
Tested-by: Martin Hauke <mardnh@gmx.de>
Fixes: bb2bdeb83fb1 ("qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 7b831da141a97f9bc60d3b6ef0b21dcaf596ec74
Author: Ani Sinha <ani@arista.com>
Date: Fri Oct 30 16:54:31 2015 -0700
ipmr: fix possible race resulting from improper usage of IP_INC_STATS_BH() in preemptible context.
[ Upstream commit 44f49dd8b5a606870a1f21101522a0f9c4414784 ]
Fixes the following kernel BUG :
BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758
caller is __this_cpu_preempt_check+0x13/0x15
CPU: 0 PID: 2758 Comm: bash Tainted: P O 3.18.19 #2
ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000
0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800
ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8
Call Trace:
[<ffffffff81482b2a>] dump_stack+0x52/0x80
[<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1
[<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15
[<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c
[<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e
[<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c
[<ffffffff810553fc>] ? get_parent_ip+0x11/0x42
[<ffffffff810e6974>] ? pollwake+0x4d/0x51
[<ffffffff81058ac0>] ? default_wake_function+0x0/0xf
[<ffffffff810553fc>] ? get_parent_ip+0x11/0x42
[<ffffffff810613d9>] ? __wake_up_common+0x45/0x77
[<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32
[<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53
[<ffffffff8139a519>] ? sock_def_readable+0x71/0x75
[<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55
[<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41
[<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86
[<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d
[<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b
[<ffffffff810d5738>] ? new_sync_read+0x82/0xaa
[<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99
[<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32
[<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f
[<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf
[<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3
[<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e
Signed-off-by: Ani Sinha <ani@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit f1004ea754724fbab6aed11d6366f90dc205725e
Author: Phil Reid <preid@electromag.com.au>
Date: Fri Oct 30 16:43:55 2015 +0800
stmmac: Correctly report PTP capabilities.
[ Upstream commit e6dbe1eb2db0d7a14991c06278dd3030c45fb825 ]
priv->hwts_*_en indicate if timestamping is enabled/disabled at run
time. But priv->dma_cap.time_stamp and priv->dma_cap.atime_stamp
indicates HW is support for PTPv1/PTPv2.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 492ee74a9ab0c953e82cbcb2a4e801e7b5c886de
Author: Carol L Soto <clsoto@linux.vnet.ibm.com>
Date: Tue Oct 27 17:36:20 2015 +0200
net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes
[ Upstream commit c02b05011fadf8e409e41910217ca689f2fc9d91 ]
When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.
If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.
When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure. This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).
However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct. This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".
Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit c03f8638ebfbc9c9ddc542bbb78b96ace2cd64ee
Author: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Date: Mon Oct 26 12:46:37 2015 -0400
RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv
[ Upstream commit 8ce675ff39b9958d1c10f86cf58e357efaafc856 ]
Either of pskb_pull() or pskb_trim() may fail under low memory conditions.
If rds_tcp_data_recv() ignores such failures, the application will
receive corrupted data because the skb has not been correctly
carved to the RDS datagram size.
Avoid this by handling pskb_pull/pskb_trim failure in the same
manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and
retry via the deferred call to rds_send_worker() that gets set up on
ENOMEM from rds_tcp_read_sock()
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 037eb89d8b8f6119adae62f87f77f32eb384231b
Author: Guillaume Nault <g.nault@alphalink.fr>
Date: Thu Oct 22 16:57:10 2015 +0200
ppp: fix pppoe_dev deletion condition in pppoe_release()
[ Upstream commit 1acea4f6ce1b1c0941438aca75dd2e5c6b09db60 ]
We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev.
PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is
NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies
(po->pppoe_dev != NULL).
Since we're releasing a PPPoE socket, we want to release the pppoe_dev
if it exists and reset sk_state to PPPOX_DEAD, no matter the previous
value of sk_state. So we can just check for po->pppoe_dev and avoid any
assumption on sk->sk_state.
Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 2d2d5e7745361bf7d106abd3e990579f4956ba11
Author: Jason Wang <jasowang@redhat.com>
Date: Fri Oct 23 00:57:05 2015 -0400
macvtap: unbreak receiving of gro skb with frag list
[ Upstream commit f23d538bc24a83c16127c2eb82c9cf1adc2b5149 ]
We don't have fraglist support in TAP_FEATURES. This will lead
software segmentation of gro skb with frag list. Fixes by having
frag list support in TAP_FEATURES.
With this patch single session of netperf receiving were restored from
about 5Gb/s to about 12Gb/s on mlx4.
Fixes a567dd6252 ("macvtap: simplify usage of tap_features")
Cc: Vlad Yasevich <vyasevic@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit c75f0a0bfdec01eac652ad6a9eaa14e7ea5d85cb
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Mon Oct 19 13:16:49 2015 +0300
irda: precedence bug in irlmp_seq_hb_idx()
[ Upstream commit 50010c20597d14667eff0fdb628309986f195230 ]
This is decrementing the pointer, instead of the value stored in the
pointer. KASan detects it as an out of bounds reference.
Reported-by: "Berry Cheng 程君(成淼)" <chengmiao.cj@alibaba-inc.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit dc1546ee854c56780a29624d3bbf20a6fcd05574
Author: Tom Tucker <tom@ogc.us>
Date: Tue Mar 25 15:14:57 2014 -0500
Fix regression in NFSRDMA server
commit 7e4359e2611f95a97037e2b6905eab52f28afbeb upstream.
The server regression was caused by the addition of rq_next_page
(afc59400d6c65bad66d4ad0b2daf879cbff8e23e). There were a few places that
were missed with the update of the rq_respages array.
Signed-off-by: Tom Tucker <tom@ogc.us>
Tested-by: Steve Wise <swise@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 557f3d9f4e9bc4777360b403004141bb7e047aa6
Author: Dan Williams <dan.j.williams@intel.com>
Date: Fri May 8 15:23:55 2015 -0400
ahci: avoton port-disable reset-quirk
commit dbfe8ef5599a5370abc441fcdbb382b656563eb4 upstream.
Avoton AHCI occasionally sees drive probe timeouts at driver load time.
When this happens SCR_STATUS indicates device detected, but no D2H FIS
reception. Reset the internal link state machines by bouncing
port-enable in the PCS register when this occurs.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 4f348a8d38f7bf2a4137acbeed2057485b6fd618
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sat Feb 22 16:53:30 2014 +0100
libahci: Allow drivers to override start_engine
commit 039ece38da45f5e6a94be3aa7611cf3634bc2461 upstream.
Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a
special register to be poked before starting the DMA engine.
This register gets reset on an ahci_stop_engine call, so there is no other
place then ahci_start_engine where this poking can be done.
This commit allows drivers to override ahci_start_engine behavior for use by
the Allwinner AHCI driver (and potentially other drivers in the future).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit f94234c73bc8a9cacafac2770e279534ef06825d
Author: Paul Moore <pmoore@redhat.com>
Date: Tue Dec 30 09:26:21 2014 -0500
audit: create private file name copies when auditing inodes
commit fcf22d8267ad2601fe9b6c549d1be96401c23e0b upstream.
Unfortunately, while commit 4a928436 ("audit: correctly record file
names with different path name types") fixed a problem where we were
not recording filenames, it created a new problem by attempting to use
these file names after they had been freed. This patch resolves the
issue by creating a copy of the filename which the audit subsystem
frees after it is done with the string.
At some point it would be nice to resolve this issue with refcounts,
or something similar, instead of having to allocate/copy strings, but
that is almost surely beyond the scope of a -rcX patch so we'll defer
that for later. On the plus side, only audit users should be impacted
by the string copying.
Reported-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 8b8c7dccfc747fe8027a84eec59b4f656fa12322
Author: Paul Moore <pmoore@redhat.com>
Date: Mon Dec 22 12:27:39 2014 -0500
audit: correctly record file names with different path name types
commit 4a92843601ad0f5067f441d2f0dca55bbe18c076 upstream.
There is a problem with the audit system when multiple audit records
are created for the same path, each with a different path name type.
The root cause of the problem is in __audit_inode() when an exact
match (both the path name and path name type) is not found for a
path name record; the existing code creates a new path name record,
but it never sets the path name in this record, leaving it NULL.
This patch corrects this problem by assigning the path name to these
newly created records.
There are many ways to reproduce this problem, but one of the
easiest is the following (assuming auditd is running):
# mkdir /root/tmp/test
# touch /root/tmp/test/567
# auditctl -a always,exit -F dir=/root/tmp/test
# touch /root/tmp/test/567
Afterwards, or while the commands above are running, check the audit
log and pay special attention to the PATH records. A faulty kernel
will display something like the following for the file creation:
type=SYSCALL msg=audit(1416957442.025:93): arch=c000003e syscall=2
success=yes exit=3 ... comm="touch" exe="/usr/bin/touch"
type=CWD msg=audit(1416957442.025:93): cwd="/root/tmp"
type=PATH msg=audit(1416957442.025:93): item=0 name="test/"
inode=401409 ... nametype=PARENT
type=PATH msg=audit(1416957442.025:93): item=1 name=(null)
inode=393804 ... nametype=NORMAL
type=PATH msg=audit(1416957442.025:93): item=2 name=(null)
inode=393804 ... nametype=NORMAL
While a patched kernel will show the following:
type=SYSCALL msg=audit(1416955786.566:89): arch=c000003e syscall=2
success=yes exit=3 ... comm="touch" exe="/usr/bin/touch"
type=CWD msg=audit(1416955786.566:89): cwd="/root/tmp"
type=PATH msg=audit(1416955786.566:89): item=0 name="test/"
inode=401409 ... nametype=PARENT
type=PATH msg=audit(1416955786.566:89): item=1 name="test/567"
inode=393804 ... nametype=NORMAL
This issue was brought up by a number of people, but special credit
should go to hujianyang@huawei.com for reporting the problem along
with an explanation of the problem and a patch. While the original
patch did have some problems (see the archive link below), it did
demonstrate the problem and helped kickstart the fix presented here.
* https://lkml.org/lkml/2014/9/5/66
Reported-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 1f71f19f190bbd80d00b175a039de8b6aa946ecd
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri Jul 3 11:53:03 2015 +0300
mptfusion: prevent some memory corruption
commit e819cdb198319cccf4af4fc12ac4d796109d8c23 upstream.
These are signed values the come from the user, we put a cap on the
upper bounds but not on the lower bounds.
We use "karg.dataSgeOffset" to calculate "sz". We verify "sz" and
proceed as if that means that "karg.dataSgeOffset" is correct but this
fails to consider that the "sz" calculations can have integer overflows.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 8442d4876ef9d3df87d1bdb5113e6a6ee41c20d2
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Tue Jul 7 15:28:13 2015 +0100
mfd: wm5110: Add register patch for rev E and above
commit 81207880cef207cd89db863f9aa1d65f22b4f2a2 upstream.
Add a register patch for rev E and above that configures the location of
some write sequences to assist with the headphone enables.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 3833b2c882b1060aff477ad911bcc7768d75d842
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Thu Jan 9 11:53:54 2014 +0000
mfd: wm5110: Add register patch for rev D chip
commit 02915661dbb91b25b621ab3f387ab55311bded7f upstream.
Evaluation of revision D of WM5110 suggests updates to the register
patch for optimal performance. For the sake of clarity rev C of the chip
does not require a register patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit cfcdadb344e6bce7f3a80da83322b36d5795c22e
Author: Soeren Grunewald <soeren.grunewald@desy.de>
Date: Thu Jun 11 09:25:04 2015 +0200
serial: 8250_pci: Add support for 12 port Exar boards
commit be32c0cf0462c36f482b5ddcff1d8371be1e183c upstream.
The Exar XR17V358 can also be combined with a XR17V354 chip to act as a
single 12 port chip. This works the same way as the combining two XR17V358
chips. But the reported device id then is 0x4358.
Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 3e8c9dd24acc11db838781ca05305ed02484f2c3
Author: Soeren Grunewald <soeren.grunewald@desy.de>
Date: Tue Apr 28 16:29:49 2015 +0200
serial: 8250_pci: Add support for 16 port Exar boards
commit 96a5d18bc1338786fecac73599f1681f59a59a8e upstream.
The Exar XR17V358 chip usually provides only 8 ports. But two chips can be
combined to act as a single 16 port chip. Therefor one chip is configured
as master the second as slave by connecting the mode pin to VCC (master)
or GND (slave).
Then the master chip is reporting a different device-id depending on
whether a slave is detected or not. The UARTs 8-15 are addressed from
0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to
address all 16 ports as before.
See: https://www.exar.com/common/content/document.ashx?id=1587 page 11
Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 31eb9884abf96a1631be20ad2a317452b3818558
Author: Doron Tsur <doront@mellanox.com>
Date: Sun Oct 11 15:58:17 2015 +0300
IB/cm: Fix rb-tree duplicate free and use-after-free
commit 0ca81a2840f77855bbad1b9f172c545c4dc9e6a4 upstream.
ib_send_cm_sidr_rep could sometimes erase the node from the sidr
(depending on errors in the process). Since ib_send_cm_sidr_rep is
called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv
could be either erased from the rb_tree twice or not erased at all.
Fixing that by making sure it's erased only once before freeing
cm_id_priv.
Fixes: a977049dacde ('[PATCH] IB: Add the kernel CM implementation')
Signed-off-by: Doron Tsur <doront@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit c5891c0838328d666faff93daf46731bf85b9cc2
Author: Dāvis Mosāns <davispuh@gmail.com>
Date: Fri Aug 21 07:29:22 2015 +0300
mvsas: Fix NULL pointer dereference in mvs_slot_task_free
commit 2280521719e81919283b82902ac24058f87dfc1b upstream.
When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays
NULL but it's later used in mvs_abort_task as slot which is passed
to mvs_slot_task_free causing NULL pointer dereference.
Just return from mvs_slot_task_free when passed with NULL slot.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit bcaee63e9cbee6443f8e87ae64ea0ea982dd0279
Author: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Tue Oct 20 12:09:13 2015 -0400
md/raid10: submit_bio_wait() returns 0 on success
commit 681ab4696062f5aa939c9e04d058732306a97176 upstream.
This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.
Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md")
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 4ab46026e088c6e7801e278101d66a60ce6b72b8
Author: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Tue Oct 20 12:09:12 2015 -0400
md/raid1: submit_bio_wait() returns 0 on success
commit 203d27b0226a05202438ddb39ef0ef1acb14a759 upstream.
This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.
Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md")
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit b7775d1cd0a78e447ced2dbb41a0e1586b1cb58e
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon Oct 19 18:23:57 2015 +0800
crypto: api - Only abort operations on fatal signal
commit 3fc89adb9fa4beff31374a4bf50b3d099d88ae83 upstream.
Currently a number of Crypto API operations may fail when a signal
occurs. This causes nasty problems as the caller of those operations
are often not in a good position to restart the operation.
In fact there is currently no need for those operations to be
interrupted by user signals at all. All we need is for them to
be killable.
This patch replaces the relevant calls of signal_pending with
fatal_signal_pending, and wait_for_completion_interruptible with
wait_for_completion_killable, respectively.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit c6bf30eb4c6789da93e36e68554b51dd99c2de69
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Aug 20 10:34:59 2015 +0930
module: Fix locking in symbol_put_addr()
commit 275d7d44d802ef271a42dc87ac091a495ba72fc5 upstream.
Poma (on the way to another bug) reported an assertion triggering:
[<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90
[<ffffffff81150822>] __module_address+0x32/0x150
[<ffffffff81150956>] __module_text_address+0x16/0x70
[<ffffffff81150f19>] symbol_put_addr+0x29/0x40
[<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core]
Laura Abbott <labbott@redhat.com> produced a patch which lead us to
inspect symbol_put_addr(). This function has a comment claiming it
doesn't need to disable preemption around the module lookup
because it holds a reference to the module it wants to find, which
therefore cannot go away.
This is wrong (and a false optimization too, preempt_disable() is really
rather cheap, and I doubt any of this is on uber critical paths,
otherwise it would've retained a pointer to the actual module anyway and
avoided the second lookup).
While its true that the module cannot go away while we hold a reference
on it, the data structure we do the lookup in very much _CAN_ change
while we do the lookup. Therefore fix the comment and add the
required preempt_disable().
Reported-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: a6e6abd575fc ("module: remove module_text_address()")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 54001184d4c2f4660a783437d318d3868239690a
Author: Cathy Avery <cathy.avery@oracle.com>
Date: Fri Oct 2 09:35:01 2015 -0400
xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
commit a54c8f0f2d7df525ff997e2afe71866a1a013064 upstream.
xen-blkfront will crash if the check to talk_to_blkback()
in blkback_changed()(XenbusStateInitWait) returns an error.
The driver data is freed and info is set to NULL. Later during
the close process via talk_to_blkback's call to xenbus_dev_fatal()
the null pointer is passed to and dereference in blkfront_closing.
Signed-off-by: Cathy Avery <cathy.avery@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 96c5ef590f6d974bb3cd03421b7824499c9e34e3
Author: Laura Abbott <labbott@fedoraproject.org>
Date: Mon Oct 12 11:30:13 2015 +0300
xhci: Add spurious wakeup quirk for LynxPoint-LP controllers
commit fd7cd061adcf5f7503515ba52b6a724642a839c8 upstream.
We received several reports of systems rebooting and powering on
after an attempted shutdown. Testing showed that setting
XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT
quirk allowed the system to shutdown as expected for LynxPoint-LP
xHCI controllers. Set the quirk back.
Note that the quirk was originally introduced for LynxPoint and
LynxPoint-LP just for this same reason. See:
commit 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
It was later limited to only concern HP machines as it caused
regression on some machines, see both bug and commit:
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171
commit 6962d914f317 ("xhci: Limit the spurious wakeup fix only to HP machines")
Later it was discovered that the powering on after shutdown
was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP
machine suffered from spontaneous resume from S3 (which should
not be related to the SPURIOUS_WAKEUP quirk at all). An attempt
to fix this then removed the SPURIOUS_WAKEUP flag usage completely.
commit b45abacde3d5 ("xhci: no switching back on non-ULT Haswell")
Current understanding is that LynxPoint-LP (Haswell ULT) machines
need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and
plain Lynxpoint (Haswell) machines may _not_ have the quirk
set otherwise they again will restart.
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Oliver Neukum <oneukum@suse.com>
[Added more history to commit message -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 5bdb174eff58a6f6ba8c7382ff60c569c1a33d7e
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Mon Oct 12 11:30:12 2015 +0300
xhci: handle no ping response error properly
commit 3b4739b8951d650becbcd855d7d6f18ac98a9a85 upstream.
If a host fails to wake up a isochronous SuperSpeed device from U1/U2
in time for a isoch transfer it will generate a "No ping response error"
Host will then move to the next transfer descriptor.
Handle this case in the same way as missed service errors, tag the
current TD as skipped and handle it on the next transfer event.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 76dff47884e6806e2dd71f7b9a12a4f99a344e0a
Author: Mike Snitzer <snitzer@redhat.com>
Date: Thu Oct 22 10:56:40 2015 -0400
dm btree: fix leak of bufio-backed block in btree_split_beneath error path
commit 4dcb8b57df3593dcb20481d9d6cf79d1dc1534be upstream.
btree_split_beneath()'s error path had an outstanding FIXME that speaks
directly to the potential for _not_ cleaning up a previously allocated
bufio-backed block.
Fix this by releasing the previously allocated bufio block using
unlock_block().
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit b865892e2e90302fa2e4613c181772c8659ea34e
Author: Will Deacon <will.deacon@arm.com>
Date: Wed Oct 28 16:56:13 2015 +0000
Revert "ARM64: unwind: Fix PC calculation"
commit 9702970c7bd3e2d6fecb642a190269131d4ac16c upstream.
This reverts commit e306dfd06fcb44d21c80acb8e5a88d55f3d1cf63.
With this patch applied, we were the only architecture making this sort
of adjustment to the PC calculation in the unwinder. This causes
problems for ftrace, where the PC values are matched against the
contents of the stack frames in the callchain and fail to match any
records after the address adjustment.
Whilst there has been some effort to change ftrace to workaround this,
those patches are not yet ready for mainline and, since we're the odd
architecture in this regard, let's just step in line with other
architectures (like arch/arm/) for now.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 787d82837c06fe7d5b8b38d5b22f5d1cdd809f5d
Author: Ronny Hegewald <ronny.hegewald@online.de>
Date: Thu Oct 15 18:50:46 2015 +0000
rbd: require stable pages if message data CRCs are enabled
commit bae818ee1577c27356093901a0ea48f672eda514 upstream.
rbd requires stable pages, as it performs a crc of the page data before
they are send to the OSDs.
But since kernel 3.9 (patch 1d1d1a767206fbe5d4c69493b7e6d2a8d08cc0a0
"mm: only enforce stable page writes if the backing device requires
it") it is not assumed anymore that block devices require stable pages.
This patch sets the necessary flag to get stable pages back for rbd.
In a ceph installation that provides multiple ext4 formatted rbd
devices "bad crc" messages appeared regularly (ca 1 message every 1-2
minutes on every OSD that provided the data for the rbd) in the
OSD-logs before this patch. After this patch this messages are pretty
much gone (only ca 1-2 / month / OSD).
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
[idryomov@gmail.com: require stable pages only in crc case, changelog]
[idryomov@gmail.com: backport to 3.9-3.17: context]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 237956f696672c2a34aecbfda45f87e08b1950b2
Author: Ilia Mirkin <imirkin@alum.mit.edu>
Date: Tue Oct 20 01:15:39 2015 -0400
drm/nouveau/gem: return only valid domain when there's only one
commit 2a6c521bb41ce862e43db46f52e7681d33e8d771 upstream.
On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.
This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit a0f5187efd10968161741ddbad76ff69afeb3522
Author: SeongJae Park <sj38.park@gmail.com>
Date: Tue Feb 4 15:58:09 2014 +0900
spi: fix pointer-integer size mismatch warning
commit e1bde3b11fedace5042f0232339da90bc85666af upstream.
Fix the pointer-integer size mismatch warning below:
drivers/spi/spi-gpio.c: In function ‘spi_gpio_setup’:
drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of
different size [-Wpointer-to-int-cast]
cs = (unsigned int) spi->controller_data;
^
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit dc0627873295877dafe8fc2dc27ef2507b5d7024
Author: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Date: Thu Dec 4 14:56:04 2014 +0000
power: bq24190_charger: suppress build warning
commit 31f50e48e3e4ea9d503285a389d6a1b5349d66c0 upstream.
This patch fixes following build warning:
In file included from include/linux/printk.h:261:0,
from include/linux/kernel.h:13,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/power/bq24190_charger.c:11:
drivers/power/bq24190_charger.c: In function ‘bq24190_irq_handler_thread’:
include/linux/dynamic_debug.h:86:20: warning: ‘ss_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
__dynamic_dev_dbg(&descriptor, dev, fmt, \
^
drivers/power/bq24190_charger.c:1211:5: note: ‘ss_reg’ was declared here
u8 ss_reg, f_reg;
^
In file included from include/linux/printk.h:261:0,
from include/linux/kernel.h:13,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/power/bq24190_charger.c:11:
include/linux/dynamic_debug.h:86:20: warning: ‘f_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
__dynamic_dev_dbg(&descriptor, dev, fmt, \
^
drivers/power/bq24190_charger.c:1211:13: note: ‘f_reg’ was declared here
u8 ss_reg, f_reg;
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 86d16222fd8ee0c1f7d9ff74ced8eb03b1915509
Author: David S. Miller <davem@davemloft.net>
Date: Fri Apr 17 15:15:40 2015 -0400
sfc: Fix memcpy() with const destination compiler warning.
commit 1d20a16062e771b6e26b843c0cde3b17c1146e00 upstream.
drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’:
drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers]
This is because the msg[] member of struct efx_loopback_payload
is marked as 'const'. Remove that.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit ef1a1f76f66aeadbf151b60d35f6e63109dd98f2
Author: Jan Kara <jack@suse.com>
Date: Thu Oct 22 13:32:21 2015 -0700
mm: make sendfile(2) killable
commit 296291cdd1629c308114504b850dc343eabc2782 upstream.
Currently a simple program below issues a sendfile(2) system call which
takes about 62 days to complete in my test KVM instance.
int fd;
off_t off = 0;
fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644);
ftruncate(fd, 2);
lseek(fd, 0, SEEK_END);
sendfile(fd, fd, &off, 0xfffffff);
Now you should not ask kernel to do a stupid stuff like copying 256MB in
2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin
should have a way to stop you.
We actually do have a check for fatal_signal_pending() in
generic_perform_write() which triggers in this path however because we
always succeed in writing something before the check is done, we return
value > 0 from generic_perform_write() and thus the information about
signal gets lost.
Fix the problem by doing the signal check before writing anything. That
way generic_perform_write() returns -EINTR, the error gets propagated up
and the sendfile loop terminates early.
Signed-off-by: Jan Kara <jack@suse.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 688df031ba943681d7f61eafa324f4902c591f4e
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Tue Oct 20 10:25:58 2015 +0100
ASoC: wm8904: Correct number of EQ registers
commit 97aff2c03a1e4d343266adadb52313613efb027f upstream.
There are 24 EQ registers not 25, I suspect this bug came about because
the registers start at EQ1 not zero. The bug is relatively harmless as
the extra register written is an unused one.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 47dbcf2f89418213e9db1f4c6604444894fc06e3
Author: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Date: Fri Oct 16 15:53:29 2015 +0530
powerpc/rtas: Validate rtas.entry before calling enter_rtas()
commit 8832317f662c06f5c06e638f57bfe89a71c9b266 upstream.
Currently we do not validate rtas.entry before calling enter_rtas(). This
leads to a kernel oops when user space calls rtas system call on a powernv
platform (see below). This patch adds code to validate rtas.entry before
making enter_rtas() call.
Oops: Exception in kernel mode, sig: 4 [#1]
SMP NR_CPUS=1024 NUMA PowerNV
task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000
NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140
REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le)
MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000
CFAR: c000000000009c0c SOFTE: 0
NIP [0000000000000000] (null)
LR [0000000000009c14] 0x9c14
Call Trace:
[c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable)
[c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0
[c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98
Fixes: 55190f88789a ("powerpc: Add skeleton PowerNV platform")
Reported-by: NAGESWARA R. SASTRY <nasastry@in.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Reword change log, trim oops, and add stable + fixes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit e627a4ceb2d0c49bb16660b231f923362f0ae400
Author: Joerg Roedel <jroedel@suse.de>
Date: Tue Oct 20 14:59:36 2015 +0200
iommu/amd: Don't clear DTE flags when modifying it
commit cbf3ccd09d683abf1cacd36e3640872ee912d99b upstream.
During device assignment/deassignment the flags in the DTE
get lost, which might cause spurious faults, for example
when the device tries to access the system management range.
Fix this by not clearing the flags with the rest of the DTE.
Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Tested-by: G. Richard Bellamy <rbellamy@pteradigm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit bcbe2559b52ccc3ab911e939ef50d0f0074ab442
Author: Johannes Berg <johannes.berg@intel.com>
Date: Tue Sep 15 14:36:09 2015 +0200
iwlwifi: mvm: fix D3 firmware PN programming
commit 2cf5eb3ab7bb7f2e3a70edcef236cd62c87db030 upstream.
The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit d157c42a60c6f40061b7636793c19f78a8a6305b
Author: Johannes Berg <johannes.berg@intel.com>
Date: Tue Sep 22 10:47:27 2015 +0200
iwlwifi: fix firmware filename for 3160
commit b5a48134f8af08f5243328f8a0b05fc5ae7cf343 upstream.
The MODULE_FIRMWARE() for 3160 should be using the 7260 version as
it's done in the device configuration struct instead of referencing
IWL3160_UCODE_API_OK which doesn't even exist.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 9b4e779f333bb3b90b5878fd8c173b45a6dfb5c6
Author: Johannes Berg <johannes.berg@intel.com>
Date: Tue Sep 15 14:36:09 2015 +0200
iwlwifi: dvm: fix D3 firmware PN programming
commit 5bd166872d8f99f156fac191299d24f828bb2348 upstream.
The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit ba7c09b103a4580e23b961c3e2541a54272c8edf
Author: Joe Thornber <ejt@redhat.com>
Date: Wed Oct 21 18:36:49 2015 +0100
dm btree remove: fix a bug when rebalancing nodes after removal
commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b upstream.
Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().
The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them. If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.
Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.
Unit tested in userspace using this program:
https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>