% \iffalse meta-comment
%
% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file. 
% 
% This file is part of the LaTeX base system.
% -------------------------------------------
% 
% It may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3c
% of this license or (at your option) any later version.
% The latest version of this license is in
%    http://www.latex-project.org/lppl.txt
% and version 1.3c or later is part of all distributions of LaTeX 
% version 2005/12/01 or later.
% 
% This file has the LPPL maintenance status "maintained".
% 
% The list of all files belonging to the LaTeX base distribution is
% given in the file `manifest.txt'. See also `legal.txt' for additional
% information.
% 
% The list of derived (unpacked) files belonging to the distribution 
% and covered by LPPL is defined by the unpacking scripts (with 
% extension .ins) which are part of the distribution.
% 
% \fi
%
% \iffalse
%%% From File: ltclass.dtx
%
%<*driver>
% \fi
\ProvidesFile{ltclass.dtx}
             [2007/08/05 v1.1h LaTeX Kernel (Class & Package Interface)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltclass.dtx}
\begin{document}
\title{The main structure of documents}
\author{Frank Mittelbach\and Chris Rowley\and Alan Jeffrey\and
        David Carlisle}
\date{\filedate}
\maketitle
 \DocInput{\filename}
\end{document}
%</driver>
% \fi
%
% \iffalse
% (C) Copyright Frank Mittelbach, Chris Rowley,
%               Alan Jeffrey and David Carlisle 1993-1998.
% All rights reserved.
% \fi
%
% \CheckSum{1194}
%
% \changes{v1.0f}{1994/05/22}{Use new warning and error commands}
% \changes{v1.0l}{1994/11/17}{\cs{@tempa} to \cs{reserved@a}}
% \changes{v1.0z}{1998/03/21}{Added to documentation of filecontents}
% \changes{v1.1c}{1998/08/17}{(RmS) Minor documentation fixes.}
%
% \section{Introduction}
%
% This file implements the following declarations, which replace
% |\documentstyle| in  \LaTeXe\ documents.
%
% Note that old documents containing |\documentstyle| will be run using
% a compatibility option---thus keeping everyone happy, we hope!
%
% The overall idea is that there are two types of `style files':
% `class files' which define elements and provide a default formatting
% for them;  and `packages' which provide extra functionality.  One
% difference between \LaTeXe\ and \LaTeX2.09 is that \LaTeXe\ packages
% may have options. Note that options to classes packages may be
% implemented such that they input files, but these file names are not
% necessarily directly related to the option name.
%
% \section{User interface}
%
% |\documentclass[|\meta{main-option-list}|]{|^^A
%   \meta{class}|}[|\meta{version}|]|
%
% There must be exactly one such declaration, and it must come first.
% The \meta{main-option-list} is a list of options which can modify the
% formatting of elements which are defined in the \meta{class} file
% as well as in all following |\usepackage| declarations (see below).
% The \meta{version} is a version number, beginning with a date in the
% format |YYYY/MM/DD|.  If an older version of the class is found, a
% warning is issued.
%
% \bigskip
%
% |\documentstyle[|\meta{main-option-list}|]{|^^A
%   \meta{class}|}[|\meta{version}|]|
%
% The |\documentstyle| declaration is kept in order to maintain upward
% compatibility with \LaTeX2.09 documents.  It is similar to
% |\documentclass|, but it causes all options in
% \meta{main-option-list} that the \meta{class} does not use to be
% passed to |\RequirePackage| after the options have been processed.
% This maintains compatibility with the 2.09 behaviour. Also a flag is
% set to indicate that the document is to be processed in \LaTeX2.09
% compatibility mode.  As far as most packages are concerned, this
% only affects the warnings and errors \LaTeX\ generates. This flag
% does affect the definition of font commands, and |\sloppy|.
%
% \bigskip
%
% |\usepackage[|\meta{package-option-list}|]{|^^A
%    \meta{package-list}|}[|\meta{version}|]|
%
% There can be any number of these declarations. All packages in
% \meta{package-list} are called with the same options.
%
% Each \meta{package} file defines new elements (or modifies those
% defined in the \meta{class}), and thus extends the range of documents
% which can be processed.
% The \meta{package-option-list} is a list of options which can modify
% the formatting of elements defined in the \meta{package} file.
% The \meta{version} is a version number, beginning with a date in the
% format |YYYY/MM/DD|.  If an older version of the package is found, a
% warning is issued.
%
% Each package is loaded only once.  If the same package is requested
% more than once, nothing happens, unless the package has been requested
% with options that were not given the first time it was loaded, in
% which case an error is produced.
%
% As well as processing the options given in the
% \meta{package-option-list}, each package processes the
% \meta{main-option-list}.  This means that options that affect all
% of the packages can be given globally, rather than repeated for every
% package.
%
% Note that class files have the extension |.cls|, packages have the
% extension |.sty|.
%
% \DescribeEnv{filecontents}
% The environment |filecontents| is intended for passing the contents
% of packages, options, or other files along with a document in a
% single file.
% It has one argument, which is the name of the file to create. If that
% file already exists (maybe only in the current directory if the OS
% supports a notion of a `current directory' or `default directory')
% then nothing happens
% (except for an information message) and the body of the environment
% is bypassed. Otherwise, the body of the environment is written
% verbatim to the file name given as the first argument, together with
% some comments about how it was produced.
%
% The environment is allowed only before |\documentclass| to ensure
% that all packages or options necessary for this particular run are
% present when needed.  The begin and end tags should each be on a
% line by itself.  There is also a star-form; this does not write
% extra comments into the file.
%
% \subsection{Option processing}
%
% When the options are processed, they are divided into two types: {\em
% local\/} and {\em global}:
% \begin{itemize}
%
% \item For a class, the options in the |\documentclass| command are
%    local.
%
% \item For a package, the options in the |\usepackage| command are
%    local, and the options in the |\documentclass| command are global.
%
% \end{itemize}
% The options for |\documentclass| and |\usepackage|
% are processed in the following way:
% \begin{enumerate}
%
% \item The local and global options that have been declared
%   (using |\DeclareOption| as  described below) are processed
%   first.
%
%  In the case of |\ProcessOptions|, they are processed in the order
%  that they were declared in the class or package.
%
%  In the case of |\ProcessOptions*|, they are processed in the order
%  that they appear in the option-lists. First the global options, and
%  then the local ones.
%
% \item Any remaining local options are dealt with using the default
%   option (declared using the |\DeclareOption*| declaration described
%   below).  For document classes, this usually does nothing, but
%   records the option on a list of unused options.
%   For packages, this usually produces an error.
%
% \end{enumerate}
% Finally, when |\begin{document}| is reached, if there are any global
% options which have not been used by either the class or any package,
% the system will produce a warning.
%
%
% \section{Class and Package interface}
%
% \subsection{Class name and version}
%
% \DescribeMacro\ProvidesClass
% A class can identify itself with the
% |\ProvidesClass{|\meta{name}|}[|\meta{version}|]| command.  The
% \meta{version} should begin with a date in the format |YYYY/MM/DD|.
%
% \subsection{Package name and version}
%
% \DescribeMacro\ProvidesPackage
% A package can identify itself with the
% |\ProvidesPackage|\marg{name}\oarg{version} command.  The
% \meta{version} should begin with a date in the format |YYYY/MM/DD|.
%
% \subsection{Requiring other packages}
%
% \DescribeMacro\RequirePackage
% Packages or classes can load other packages using\\
% |\RequirePackage|\oarg{options}\marg{name}\oarg{version}.\\
% If the package has already been loaded, then nothing happens unless
% the requested options are not a subset of the options with which it
% was loaded, in which case an error is called.
%
% \DescribeMacro\LoadClass
%  Similar to |\RequirePackage|, but for classes, may not be used in
%  package files.
%
% \DescribeMacro\PassOptionsToPackage
% Packages can pass options to other packages using:\\
% |\PassOptionsToPackage{|\meta{options}|}{|\meta{package}|}|.\\ 
% \DescribeMacro\PassOptionsToClass
% This adds the \meta{options} to the options list of any future
% |\RequirePackage| or |\usepackage| command.  For example:
% \begin{verbatim}
%    \PassOptionsToPackage{foo,bar}{fred}
%    \RequirePackage[baz]{fred}\end{verbatim}
% is the same as:
% \begin{verbatim}
%    \RequirePackage[foo,bar,baz]{fred}\end{verbatim}
%
% \DescribeMacro\LoadClassWithOptions
% |\LoadClassWithOptions|\marg{name}\oarg{version}:\\
% This is similar to
% |\LoadClass|, but it always calls class \meta{name} with
% exactly the same option list that is being used by the current class,
% rather than an option explicitly  supplied or passed on by
% |\PassOptionsToClass|.
% \DescribeMacro\RequirePackageWithOptions
% |\RequirePackageWithOptions| is the analogous command for packages.
%
% This is mainly intended to allow one class to simply build on another,
% for example:
%\begin{verbatim}
%   \LoadClassWithOptions{article}
%\end{verbatim}
%
% This should be contrasted with the slightly different construction
%\begin{verbatim}
%   \DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
%   \ProcessOptions
%   \LoadClass{article}
%\end{verbatim}
%
% As used here, the effects are more or less the same, but the 
% version using |\LoadClassWithOptions| is slightly quicker
% (and less to type).
% If, however, the class declares options of its own then
% the two constructions are different; compare, for example:
%\begin{verbatim}
%   \DeclareOption{landscape}{...}
%   \ProcessOptions
%   \LoadClassWithOptions{article}
%\end{verbatim}
% with:
%\begin{verbatim}
%   \DeclareOption{landscape}{...}
%   \DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
%   \ProcessOptions
%   \LoadClass{article}
%\end{verbatim}
% In the first case, the \textsf{article} class will be called with
% option |landscape| precisely when the current class is called with
% this option; but in the second example it will
% not as in that case \textsf{article} is only passed options by the
% default option handler, which is not used for |landscape| as that
% option is explicitly declared.
%
% \DescribeMacro\@ifpackageloaded
% To find out if a package has already been loaded, use\\
% \DescribeMacro\@ifclassloaded
% |\@ifpackageloaded{|\meta{package}|}{|\meta{true}|}{|\meta{false}|}|.
%
% \DescribeMacro\@ifpackagelater
% To find out if a package has already been loaded with a version more
% recent than \meta{version}, use
% \DescribeMacro\@ifclasslater
% |\@ifpackagelater{|\meta{package}|}{|\meta{version}|}{|^^A
% \meta{true}|}{|\meta{false}|}|.
%
% \DescribeMacro\@ifpackagewith
% To find out if a package has already been loaded with at least the
% options \meta{options}, use
% \DescribeMacro\@ifclasswith
% |\@ifpackagewith{|\meta{package}|}{|\meta{options}|}{|^^A
% \meta{true}|}{|\meta{false}|}|.
%
% There exists one package that can't be tested with the above
% commands: the \texttt{fontenc} package pretends that it was never
% loaded to allow for repeated reloading with different options (see
% \texttt{ltoutenc.dtx} for details).
%
%
% \subsection{Declaring new options}
%
% Options for classes and packages are built using the same macros.
%
% \DescribeMacro\DeclareOption To define a builtin option, use
% |\DeclareOption{|\meta{name}|}{|\meta{code}|}|.
%
% \DescribeMacro{\DeclareOption*} To define the default action to
% perform for local options which have not been declared, use
% |\DeclareOption*{|\meta{code}|}|.
%
% {\em Note\/}: there should be no use of\\
%  |\RequirePackage|, |\DeclareOption|, |\DeclareOption*| or
%   |\ProcessOptions|\\
% inside |\DeclareOption| or |\DeclareOption*|.
%
% Possible uses for |\DeclareOption*| include:
%
% |\DeclareOption*{}|\\
%    Do nothing. Silently accept unknown options. (This suppresses the
%    usual warnings.)
%
% |\DeclareOption*{\@unkownoptionerror}|\\
%     Complain about unknown local options. (The initial setting for
%       package files.)
%
% |\DeclareOption*{\PassOptionsToPackage{\CurrentOption}|^^A
%                                     |{|\meta{pkg-name}|}|\\
% Handle the the current option by passing it on to the package
% \meta{pkg-name}, which will presumably be loaded via
% |\RequirePackage| later in the file. This is useful for building
% `extension' packages, that perhaps handle a couple of new options,
% but then pass everything else on to an existing package.
%
% |\DeclareOption*{\InputIfFileExists{xx-\CurrentOption.yyy}%|\\
% |               {}%|\\
% |               {\OptionNotUsed}}|\\
%  Handle the option foo by loading the file |xx-foo.yyy| if it
%  exists, otherwise do nothing, but declare that the option was not
%  used.
%  Actually the |\OptionNotUsed| declaration is only needed if this is
%  being used in class files, but does no harm in package files.
%
%
% \subsection{Safe Input Macros}
% \DescribeMacro{\InputIfFileExists}
%  |\InputIfFileExists{|\meta{file}|}{|\meta{then}|}{|\meta{else}|}|\\
% Inputs \meta{file} if it exists. Immediately before the input,
% \meta{then} is executed. Otherwise \meta{else} is executed.
%
% \DescribeMacro{\IfFileExists}
% As above, but does not input the file.
%
% One thing you might like to put in the \meta{else} clause is
%
% \DescribeMacro{\@missingfileerror}
% This starts an interactive request for a filename, supplying default
% extensions. Just hitting return causes the whole input to be skipped
% and entering |x| quits the current run,
%
% \DescribeMacro{\input}
% This has been redefined from the \LaTeX2.09 definition, in terms of
% the new commands |\InputIfFileExists| and |\@missingfileerror|.
%
%
% \DescribeMacro{\listfiles} Giving this declaration in the preamble
% causes a list of all files input via the `safe input' commands to be
% listed at the end. Any strings specified in the optional argument to
% |\ProvidesPackage| are listed alongside the file name. So files in
% standard (and other non-standard) distributions can put informative
% strings in this argument.
%
% \StopEventually{}
%
% \section{Implementation}
%
%    \begin{macrocode}
%<*2ekernel>
%    \end{macrocode}
%
%
% \changes{v0.2g}{1993/11/23}
%         {Various macros now moved to latex.tex.}
% \changes{v0.2g}{1993/11/23}
%         {Warnings and errors now directly coded.}
% \changes{v0.2h}{1993/11/28}
%         {Primitive filenames now terminated by space not \cs{relax}.}
% \changes{v0.2h}{1993/11/28}
%         {Directory syntax checing moved to dircheck.dtx}
% \changes{v0.2h}{1993/11/28}
%         {Assorted commands now in the kernel removed.}
% \changes{v0.2i}{1993/12/03}
%         {\cs{@onlypreamble}: Many commands declared.}
% \changes{v0.2i}{1993/12/03}
%         {Removed obsolete \cs{@documentclass}}
% \changes{v0.2o}{1993/12/13}
%         {Removed setting \cs{errorcontextlines}\ (now in latex.tex)}
% \changes{v0.2p}{1993/12/15}
%         {Removed extra `.'s from \cs{@@warning}s}
% \changes{v0.2s}{1994/01/17}
%         {Added many more \cs{@onlypreamble} commands}
% \changes{v0.2s}{1994/01/17}
%         {Wrapped long lines to column 72}
% \changes{v0.3a}{1994/03/02}
%         {Remove need for driver file}
% \changes{v0.3b}{1994/03/08}
%         {Modify driver code into `new style'}
% \changes{v0.3c}{1994/03/12}
%         {Change name from docclass to ltclass}
% \changes{v0.3h}{1994/04/25}
%         {Removed spurious extra `.'s at the end of error messages}
% \changes{v1.0a}{1994/04/29}
%         {Change version number to 1 (no other change)}
% \changes{v1.0k}{1994/11/03}
%         {Move \cs{@missingfileerror} to ltfiles}
%
% \begin{macro}{\if@compatibility}
%    The flag for compatibilty mode.
%    \begin{macrocode}
\newif\if@compatibility
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@documentclasshook}
%    The hook called after the first |\documentclass| command.  By
%    default this checks to see if |\@normalsize| is undefined, and if
%    so, sets it to |\normalsize|.
% \changes{v0.2q}{1993/12/17}
%         {Macro added}
% \changes{v0.2z}{1994/02/10}
%         {Changed the name from \cs{@compatibility} to
%          \cs{@documentclasshook}, and added the check for whether
%          \cs{@normalsize} has been defined.  ASAJ.}
%    \begin{macrocode}
\def\@documentclasshook{%
   \ifx\@normalsize\@undefined
      \let\@normalsize\normalsize
   \fi
}
%    \end{macrocode}
% \end{macro}
%
%  \begin{macro}{\@declaredoptions}
%    This list is automatically built by |\DeclareOption|.
%    It is the list of options (separated by commas) declared in
%    the class or package file and it defines the order in which the
%    the corresponding |\ds@|\meta{option} commands are executed.
%    All local \meta{option}s which are not declared will be processed
%    in the order defined by the optional argument of |\documentclass|
%    or |\usepackage|.
%    \begin{macrocode}
\let\@declaredoptions\@empty
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{\@classoptionslist}
%    List of options of the main class.
% \changes{v1.0u}{1996/07/26}{made only preamble}
%    \begin{macrocode}
\let\@classoptionslist\relax
\@onlypreamble\@classoptionslist
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{\@unusedoptionlist}
% \changes{v1.0u}{1996/07/26}{made only preamble}
%    List of options of the main class that haven't been declared or
%    loaded as class option files.
%    \begin{macrocode}
\let\@unusedoptionlist\@empty
\@onlypreamble\@unusedoptionlist
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{\CurrentOption}
%    Name of current package or option.
% \changes{v0.2c}{1993/11/17}
%         {Name changed from \cs{@curroption}}
%    \begin{macrocode}
\let\CurrentOption\@empty
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{\@currname}
%    Name of current package or option.
%    \begin{macrocode}
\let\@currname\@empty
%    \end{macrocode}
%  \end{macro}
%
% \begin{macro}{\@currext}
%    The current file extension.
% \changes{v0.2a}{1993/11/14}{Name changed from \cs{@currextension}}
%    \begin{macrocode}
\global\let\@currext=\@empty
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@clsextension}
% \begin{macro}{\@pkgextension}
%    The two possible values of |\@currext|.
%    \begin{macrocode}
\def\@clsextension{cls}
\def\@pkgextension{sty}
\@onlypreamble\@clsextension
\@onlypreamble\@pkgextension
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@pushfilename}
% \begin{macro}{\@popfilename}
% \begin{macro}{\@currnamestack}
% Commands to push and pop the file name and extension. \\
% |#1| current name.      \\
% |#2| current extension. \\
% |#3| current catcode of |@|. \\
% |#4| Rest of the stack.
%    \begin{macrocode}
\def\@pushfilename{%
  \xdef\@currnamestack{%
    {\@currname}%
    {\@currext}%
    {\the\catcode`\@}%
    \@currnamestack}}
\@onlypreamble\@pushfilename
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@popfilename{\expandafter\@p@pfilename\@currnamestack\@nil}
\@onlypreamble\@popfilename
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@p@pfilename#1#2#3#4\@nil{%
  \gdef\@currname{#1}%
  \gdef\@currext{#2}%
  \catcode`\@#3\relax
  \gdef\@currnamestack{#4}}
\@onlypreamble\@p@pfilename
%    \end{macrocode}
%
%    \begin{macrocode}
\gdef\@currnamestack{}
\@onlypreamble\@currnamestack
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@ptionlist}
%    Returns the option list of the file.
%    \begin{macrocode}
\def\@ptionlist#1{%
  \@ifundefined{opt@#1}\@empty{\csname opt@#1\endcsname}}
\@onlypreamble\@ptionlist
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@ifpackageloaded}
% \begin{macro}{\@ifclassloaded}
%   |\@ifpackageloaded{|\meta{name}|}|
%  Checks to see whether a file has been loaded.
% \changes{v0.2t}{1994/01/18}
%         {Fix typo \cs{@pkgetension}}
%    \begin{macrocode}
\def\@ifpackageloaded{\@ifl@aded\@pkgextension}
\def\@ifclassloaded{\@ifl@aded\@clsextension}
\@onlypreamble\@ifpackageloaded
\@onlypreamble\@ifclassloaded
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@ifl@aded#1#2{%
  \expandafter\ifx\csname ver@#2.#1\endcsname\relax
    \expandafter\@secondoftwo
  \else
    \expandafter\@firstoftwo
  \fi}
\@onlypreamble\@ifl@aded
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@ifpackagelater}
% \begin{macro}{\@ifclasslater}
% |\@ifpackagelater{|\meta{name}|}{YYYY/MM/DD}|
% Checks that the package loaded is more recent than the given date.
%    \begin{macrocode}
\def\@ifpackagelater{\@ifl@ter\@pkgextension}
\def\@ifclasslater{\@ifl@ter\@clsextension}
\@onlypreamble\@ifpackagelater
\@onlypreamble\@ifclasslater
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@ifl@ter#1#2{%
  \expandafter\@ifl@t@r
    \csname ver@#2.#1\endcsname}
\@onlypreamble\@ifl@ter
%    \end{macrocode}
%
% This internal macro is also used in |\NeedsTeXFormat|.
% \changes{v0.2f}{1993/11/22}
%         {Added //00 so parsing never produces a runaway argument.}
%    \begin{macrocode}
\def\@ifl@t@r#1#2{%
  \ifnum\expandafter\@parse@version#1//00\@nil<%
        \expandafter\@parse@version#2//00\@nil
    \expandafter\@secondoftwo
  \else
    \expandafter\@firstoftwo
  \fi}
\@onlypreamble\@ifl@t@r
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@parse@version#1/#2/#3#4#5\@nil{#1#2#3#4 }
\@onlypreamble\@parse@version
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@ifpackagewith}
% \begin{macro}{\@ifclasswith}
% |\@ifpackagewith{|\meta{name}|}{|\meta{option-list}|}|
% Checks that \meta{option-list} is a subset of the options
% \textbf{with} which \meta{name} was loaded.
%    \begin{macrocode}
\def\@ifpackagewith{\@if@ptions\@pkgextension}
\def\@ifclasswith{\@if@ptions\@clsextension}
\@onlypreamble\@ifpackagewith
\@onlypreamble\@ifclasswith
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@if@ptions#1#2{%
  \@expandtwoargs\@if@pti@ns{\@ptionlist{#2.#1}}}
\@onlypreamble\@if@ptions
%    \end{macrocode}
%
% Probably shouldnt use |\CurrentOption| here\ldots (changed to
% |\reserved@b|.)
% \changes{v0.2y}{1994/02/07}
%         {Add extra ,s so `two' is not matched with `twocolumn'}
%    \begin{macrocode}
\def\@if@pti@ns#1#2{%
  \let\reserved@a\@firstoftwo
  \@for\reserved@b:=#2\do{%
    \expandafter\in@\expandafter{\expandafter,\reserved@b,}{,#1,}%
    \ifin@\else\let\reserved@a\@secondoftwo\fi}%
  \reserved@a}
\@onlypreamble\@if@pti@ns
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\ProvidesPackage}
%    Checks that the current filename is correct, and defines
%    |\ver@filename|.
% \changes{v0.3c}{1994/03/12}
%         {Add \cs{wlog}}
% \changes{v0.3c}{1994/03/12}
%         {use \cs{@gtempa}}
%    \begin{macrocode}
\def\ProvidesPackage#1{%
  \xdef\@gtempa{#1}%
  \ifx\@gtempa\@currname\else
    \@latex@warning@no@line{You have requested
      \@cls@pkg\space`\@currname',\MessageBreak
       but the \@cls@pkg\space provides `#1'}%
  \fi
  \@ifnextchar[\@pr@videpackage{\@pr@videpackage[]}}%]
\@onlypreamble\ProvidesPackage
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@pr@videpackage[#1]{%
  \expandafter\xdef\csname ver@\@currname.\@currext\endcsname{#1}%
  \ifx\@currext\@clsextension
    \typeout{Document Class: \@gtempa\space#1}%
  \else
    \wlog{Package: \@gtempa\space#1}%
  \fi}
\@onlypreamble\@pr@videpackage
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ProvidesClass}
%    Like |\ProvidesPackage|, but for classes.
%    \begin{macrocode}
\let\ProvidesClass\ProvidesPackage
\@onlypreamble\ProvidesClass
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ProvidesFile}
%    Like |\ProvidesPackage|, but for arbitrary files. Do not apply
%    |\@onlypreamble| to these, as we may want to label files input
%    during the document.
% \changes{v0.2l}{1993/12/07}
%         {Macro added}
% \changes{v0.3c}{1994/03/12}
%         {Add \cs{wlog}}
% \changes{v0.3g}{1994/04/11}
%         {Protect against weird catcodes.}
% \begin{macro}{\@providesfile}
% \changes{v1.0r}{1995/10/17}
%         {Delay definition of \cs{ProvidesFile} till ltfinal}
% \changes{v1.1a}{1998/03/21}
%         {Allow \&. Internal/2702}
% \changes{v1.1d}{2001/05/25}{Explicitly set catcode of 
%                              \cs{endlinechar} to 10 (pr/3334)}
% \changes{v1.1e}{2001/06/04}{But only if it is a char (pr/3334)}
% \changes{v1.1f}{2001/08/26}{Readded setting of space char (pr/3353)}
%    \begin{macrocode}
\def\ProvidesFile#1{%
  \begingroup
    \catcode`\ 10 %
    \ifnum \endlinechar<256 %
      \ifnum \endlinechar>\m@ne
        \catcode\endlinechar 10 %
      \fi
    \fi
    \@makeother\/%
    \@makeother\&%
%    \end{macrocode}
% \changes{v1.1g}{2004/01/28}{Use kernel version of
%                             \cs{@ifnextchar} (pr/3501)}
%    \begin{macrocode}
    \kernel@ifnextchar[{\@providesfile{#1}}{\@providesfile{#1}[]}}
%    \end{macrocode}
%
% During initex a special version of |\@providesfile| is used.
% The real definition is installed right at the end, in |ltfinal.dtx|.
%\begin{verbatim}
%\def\@providesfile#1[#2]{%
%    \wlog{File: #1 #2}%
%    \expandafter\xdef\csname ver@#1\endcsname{#2}%
%  \endgroup}
%    \end{macrocode}
%\end{verbatim}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\PassOptionsToPackage}
% \begin{macro}{\PassOptionsToClass}
% If the package has been loaded, we check that it was first loaded with
% the options.  Otherwise we add the option list to that of the package.
%    \begin{macrocode}
\def\@pass@ptions#1#2#3{%
  \expandafter\xdef\csname opt@#3.#1\endcsname{%
    \@ifundefined{opt@#3.#1}\@empty
      {\csname opt@#3.#1\endcsname,}%
    \zap@space#2 \@empty}}
\@onlypreamble\@pass@ptions
%    \end{macrocode}
%
%    \begin{macrocode}
\def\PassOptionsToPackage{\@pass@ptions\@pkgextension}
\def\PassOptionsToClass{\@pass@ptions\@clsextension}
\@onlypreamble\PassOptionsToPackage
\@onlypreamble\PassOptionsToClass
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\DeclareOption}
% \begin{macro}{\DeclareOption*}
%    Adds an option as a |\ds@| command, or the default |\default@ds|
%    command.
% \changes{v0.2c}{1993/11/17}
%         {Error checking added}
% \changes{v1.0m}{1995/04/21}
%         {Made long /1498}
% \changes{v1.0n}{1995/05/12}
%         {Use \cs{toks@} to remove need to double hash /1557}
%    \begin{macrocode}
\def\DeclareOption{%
  \let\@fileswith@pti@ns\@badrequireerror
  \@ifstar\@defdefault@ds\@declareoption}
\long\def\@declareoption#1#2{%
   \xdef\@declaredoptions{\@declaredoptions,#1}%
   \toks@{#2}%
   \expandafter\edef\csname ds@#1\endcsname{\the\toks@}}
\long\def\@defdefault@ds#1{%
  \toks@{#1}%
  \edef\default@ds{\the\toks@}}
\@onlypreamble\DeclareOption
\@onlypreamble\@declareoption
\@onlypreamble\@defdefault@ds
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\OptionNotUsed}
% If we are in a class file, add |\CurrentOption| to the list of
% unused options. Otherwise, in a package file do nothing.
%    \begin{macrocode}
\def\OptionNotUsed{%
  \ifx\@currext\@clsextension
    \xdef\@unusedoptionlist{%
      \ifx\@unusedoptionlist\@empty\else\@unusedoptionlist,\fi
      \CurrentOption}%
  \fi}
\@onlypreamble\OptionNotUsed
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\default@ds}
% The default default option code.
% Set by |\@onefilewithoptions| to either |\OptionNotUsed| for
% classes, or |\@unknownoptionerror| for packages. This may be reset
% in either case with |\DeclareOption*|.
%    \begin{macrocode}
% \let\default@ds\OptionNotUsed
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ProcessOptions}
% \begin{macro}{\ProcessOptions*}
% |\ProcessOptions| calls |\ds@option| for each known package option,
% then calls |\default@ds| for each option on the local options list.
% Finally resets all the declared options to |\relax|. The empty option
% does nothing, this has to be reset on the off chance it's set to
% |\relax| if an empty element gets into the |\@declaredoptions| list.
%
% The star form is similar but executes options given in the order
% specified in the document, not the order they are declared in the
% file. In the case of packages, global options are executed before
% local ones.
% \changes{v0.2a}{1993/11/14}
%         {Stop adding the global option list inside class files.}
% \changes{v0.2a}{1993/11/14}
%         {Optimise `empty option' code.}
% \changes{v0.2b}{1993/11/15}
%         {Star form added.}
% \changes{v0.2c}{1993/11/17}
%         {restoring \cs{@fileswith@pti@ns} added.}
%    \begin{macrocode}
\def\ProcessOptions{%
  \let\ds@\@empty
  \edef\@curroptions{\@ptionlist{\@currname.\@currext}}%
  \@ifstar\@xprocess@ptions\@process@ptions}
\@onlypreamble\ProcessOptions
%    \end{macrocode}
%
% \changes{v0.2y}{1994/02/07}
%         {Add extra ,s so `two' is not matched with `twocolumn'}
%    \begin{macrocode}
\def\@process@ptions{%
  \@for\CurrentOption:=\@declaredoptions\do{%
    \ifx\CurrentOption\@empty\else
      \@expandtwoargs\in@{,\CurrentOption,}{%
         ,\ifx\@currext\@clsextension\else\@classoptionslist,\fi
         \@curroptions,}%
      \ifin@
        \@use@ption
        \expandafter\let\csname ds@\CurrentOption\endcsname\@empty
      \fi
    \fi}%
  \@process@pti@ns}
\@onlypreamble\@process@ptions
%    \end{macrocode}
%
% \changes{v0.2y}{1994/02/07}
%         {Add extra ,s so `two' is not matched with `twocolumn'}
%    \begin{macrocode}
\def\@xprocess@ptions{%
  \ifx\@currext\@clsextension\else
    \@for\CurrentOption:=\@classoptionslist\do{%
      \ifx\CurrentOption\@empty\else
        \@expandtwoargs\in@{,\CurrentOption,}{,\@declaredoptions,}%
        \ifin@
          \@use@ption
          \expandafter\let\csname ds@\CurrentOption\endcsname\@empty
        \fi
      \fi}%
  \fi
  \@process@pti@ns}
\@onlypreamble\@xprocess@ptions
%    \end{macrocode}
%
% The common part of |\ProcessOptions| and |\ProcessOptions*|.
%    \begin{macrocode}
\def\@process@pti@ns{%
  \@for\CurrentOption:=\@curroptions\do{%
    \@ifundefined{ds@\CurrentOption}%
      {\@use@ption
       \default@ds}%
%    \end{macrocode}
% There should not be any non-empty definition of |\CurrentOption| at
% this point, as all the declared options were executed earlier. This is
% for compatibility with 2.09 styles which use |\def\ds@|\ldots\
% directly, and so have options which do not appear in
% |\@declaredoptions|.
%    \begin{macrocode}
      \@use@ption}%
%    \end{macrocode}
% Clear all the definitions for option code. First set all the declared
% options to |\relax|, then reset the `default' and `empty' options. and
% the lst of declared options.
%    \begin{macrocode}
  \@for\CurrentOption:=\@declaredoptions\do{%
    \expandafter\let\csname ds@\CurrentOption\endcsname\relax}%
%    \end{macrocode}
% \changes{v1.0r}{1995/10/17}
%         {Reset \cs{CurrentOption} for graphics/1873}
%    \begin{macrocode}
  \let\CurrentOption\@empty
  \let\@fileswith@pti@ns\@@fileswith@pti@ns
  \AtEndOfPackage{\let\@unprocessedoptions\relax}}
\@onlypreamble\@process@pti@ns
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@options}
% |\@options| is a synonym for |\ProcessOptions*| for upward
% compatibility with \LaTeX2.09 style files.
%    \begin{macrocode}
\def\@options{\ProcessOptions*}
\@onlypreamble\@options
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@use@ption}
% Execute the code for the current option.
% \changes{v0.2g}{1993/11/23}
%         {Name changed from \cs{@executeoption}}
% \changes{v1.0e}{1994/05/17}
%         {Execute option after removing from list, not before}
%    \begin{macrocode}
\def\@use@ption{%
  \@expandtwoargs\@removeelement\CurrentOption
  \@unusedoptionlist\@unusedoptionlist
  \csname ds@\CurrentOption\endcsname}
\@onlypreamble\@use@ption
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ExecuteOptions}
% |\ExecuteOptions{|\meta{option-list}|}| executes the code declared
% for each option.
% \changes{v0.2d}{1993/11/18}
%         {Use \cs{CurrentOption} not \cs{reserved@a}}
% \changes{v0.2k}{1993/12/06}
%         {Preserve \cs{CurrentOption}.}
%    \begin{macrocode}
\def\ExecuteOptions#1{%
  \def\reserved@a##1\@nil{%
    \@for\CurrentOption:=#1\do{\csname ds@\CurrentOption\endcsname}%
    \edef\CurrentOption{##1}}%
  \expandafter\reserved@a\CurrentOption\@nil}
\@onlypreamble\ExecuteOptions
%    \end{macrocode}
% \end{macro}
%
% The top-level commands, which just set some parameters then call
% the internal command, |\@fileswithoptions|.
% \begin{macro}{\documentclass}
% \changes{v1.0q}{1995/06/19}
%         {Dont redefine \cs{usepackage} in compat mode for /1634}
% The main new-style class declaration.
%    \begin{macrocode}
\def\documentclass{%
  \let\documentclass\@twoclasseserror
  \if@compatibility\else\let\usepackage\RequirePackage\fi
  \@fileswithoptions\@clsextension}
\@onlypreamble\documentclass
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\documentstyle}
% 2.09 style class `style' declaration.
% \changes{v0.2a}{1993/11/14}
%         {Added \cs{RequirePackage} \cs{@unusedoptionlist} stuff.}
% \changes{v0.2b}{1993/11/15}
%         {Modified to match \cs{ProcessOption*}}
% \changes{v0.2d}{1993/11/18}
%         {Modified \cs{RequirePackage} stuff.}
% \changes{v0.2n}{1993/12/09}
%         {input 209 compatibility file.}
% \changes{v0.2o}{1993/12/13}
%         {compatibility file now latex209.sty.}
% \changes{v0.2q}{1993/12/17}
%         {Match Alan's new code.}
% \changes{v0.2u}{1994/01/21}
%         {compatibility file now latex209.def.}
%    \begin{macrocode}
\def\documentstyle{%
  \makeatletter\input{latex209.def}\makeatother
  \documentclass}
\@onlypreamble\documentstyle
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\RequirePackage}
% Load package if not already loaded.
%    \begin{macrocode}
\def\RequirePackage{%
  \@fileswithoptions\@pkgextension}
\@onlypreamble\RequirePackage
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LoadClass}
% Load class.
%    \begin{macrocode}
\def\LoadClass{%
  \ifx\@currext\@pkgextension
     \@latex@error
      {\noexpand\LoadClass in package file}%
      {You may only use \noexpand\LoadClass in a class file.}%
  \fi
  \@fileswithoptions\@clsextension}
\@onlypreamble\LoadClass
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@loadwithoptions}
% \changes{v1.0t}{1995/11/14}{macro added}
% Pass the current option list on to a class or package.
% |#1| is |\@|\emph{cls-or-pkg}|extension|,
% |#2| is |\RequirePackage| or |\LoadClass|,
% |#3| is the class or package to be loaded.
%    \begin{macrocode}
\def\@loadwithoptions#1#2#3{%
  \expandafter\let\csname opt@#3.#1\expandafter\endcsname
       \csname opt@\@currname.\@currext\endcsname
   #2{#3}}
\@onlypreamble\@loadwithoptions
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\LoadClassWithOptions}
% \changes{v1.0t}{1995/11/14}{macro added}
% Load class `|#1|' with the current option list.
%    \begin{macrocode}
\def\LoadClassWithOptions{%
  \@loadwithoptions\@clsextension\LoadClass}
\@onlypreamble\LoadClassWithOptions
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\RequirePackageWithOptions}
% \changes{v1.0t}{1995/11/14}{macro added}
% \changes{v1.0v}{1996/10/04}{Reset \cs{@unprocessedoptions} for /2269}
% Load package `|#1|' with the current option list.
%    \begin{macrocode}
\def\RequirePackageWithOptions{%
  \AtEndOfPackage{\let\@unprocessedoptions\relax}%
  \@loadwithoptions\@pkgextension\RequirePackage}
\@onlypreamble\RequirePackageWithOptions
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\usepackage}
%    To begin with, |\usepackage| produces an error.  This is reset by
%    |\documentclass|.
% \changes{v0.2o}{1993/12/13}
%         {Fixed error handling}
% \changes{v1.0h}{1994/05/23}{Remove argument if possible}
%    \begin{macrocode}
\def\usepackage#1#{%
  \@latex@error
    {\noexpand \usepackage before \string\documentclass}%
    {\noexpand \usepackage may only appear in the document
      preamble, i.e.,\MessageBreak
      between \noexpand\documentclass and
      \string\begin{document}.}%
  \@gobble}
\@onlypreamble\usepackage
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\NeedsTeXFormat}
% Check that the document is running on the correct system.
% \changes{v0.2a}{1993/11/14}
%         {made more robust for alternative syntax for other formats.}
% \changes{v0.2c}{1993/11/17}
%         {Name changed from \cs{NeedsFormat}}
% \changes{v0.2d}{1993/11/18}
%         {\cs{fmtname} \cs{fmtversion} not \cs{@}\ldots}
%    \begin{macrocode}
\def\NeedsTeXFormat#1{%
  \def\reserved@a{#1}%
  \ifx\reserved@a\fmtname
    \expandafter\@needsformat
  \else
     \@latex@error{This file needs format `\reserved@a'%
       \MessageBreak but this is `\fmtname'}{%
       The current input file will not be processed
       further,\MessageBreak
       because it was written for some other flavor of
       TeX.\MessageBreak\@ehd}%
%    \end{macrocode}
%    If the file is not meant to be processed by \LaTeXe{} we stop
%    inputting it, but we do not end the run. We just end inputting
%    the current file.
% \changes{v1.0h}{1994/05/23}
%     {Don't stop completely when format is wrong}
%    \begin{macrocode}
     \endinput \fi}
\@onlypreamble\NeedsTeXFormat
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@needsformat{%
  \@ifnextchar[%]
    \@needsf@rmat
    {}}
\@onlypreamble\@needsformat
%    \end{macrocode}
%
% \changes{v1.0b}{1994/05/04}
%         {Changed wording of the warning}
%    \begin{macrocode}
\def\@needsf@rmat[#1]{%
    \@ifl@t@r\fmtversion{#1}{}%
    {\@latex@warning@no@line
        {You have requested release `#1' of LaTeX,\MessageBreak
         but only release `\fmtversion' is available}}}
\@onlypreamble\@needsf@rmat
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\zap@space}
% |\zap@space foo|\meta{space}|\@empty| removes all spaces from |foo|
% that are not protected by |{ }| groups.
%    \begin{macrocode}
\def\zap@space#1 #2{%
  #1%
  \ifx#2\@empty\else\expandafter\zap@space\fi
  #2}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@fileswithoptions}
% The common part of |\documentclass| and |\usepackage|.
%    \begin{macrocode}
\def\@fileswithoptions#1{%
  \@ifnextchar[%]
    {\@fileswith@ptions#1}%
    {\@fileswith@ptions#1[]}}
\@onlypreamble\@fileswithoptions
%    \end{macrocode}
%
% \changes{v0.2f}{1993/11/22}
%         {Made the default [] not [\cs{@unknownversion}]}
% \changes{v1.1h}{2007/08/05}
%         {Prevent loss of brackets PR/3965}
%    \begin{macrocode}
\def\@fileswith@ptions#1[#2]#3{%
  \@ifnextchar[%]
  {\@fileswith@pti@ns#1[{#2}]#3}%
  {\@fileswith@pti@ns#1[{#2}]#3[]}}
\@onlypreamble\@fileswith@ptions
%    \end{macrocode}
% Then we do some work.
%
% First of all, we define the global variables.
% Then we look to see if the file has already been loaded.
% If it has, we check that it was first loaded with at least the current
% options.
% If it has not, we add the current options to the package options,
% set the default version to be |0000/00/00|, and load the file if we
% can find it.
% Then we check the version number.
%
% Finally, we restore the old file name, reset the default option,
% and we set the catcode of |@|.
%
% For classes, we can immediately process the file. For other types,
% |#2| could be a comma separated list, so loop through, processing
% each one separately.
% \changes{v0.2q}{1993/12/17}
%         {Add \cs{@compatibility} hook}
% \changes{v0.2s}{1994/01/17}
%         {Modify to reduce parameter stack usage}
% \changes{v0.2y}{1994/02/07}
%         {Run \cs{@compatibility} on the first class to start
%          (not the first to finish) }
% \changes{v0.2z}{1994/02/10}
%         {Renamed \cs{@compatibility} to \cs{@documentclasshook}.
%          ASAJ.}
% \changes{v1.1h}{2007/08/05}
%         {Prevent loss of brackets PR/3965}
%    \begin{macrocode}
\def\@fileswith@pti@ns#1[#2]#3[#4]{%
  \ifx#1\@clsextension
    \ifx\@classoptionslist\relax
      \xdef\@classoptionslist{\zap@space#2 \@empty}%
      \def\reserved@a{%
        \@onefilewithoptions#3[{#2}][{#4}]#1%
        \@documentclasshook}%
    \else
      \def\reserved@a{%
        \@onefilewithoptions#3[{#2}][{#4}]#1}%
    \fi
  \else
%    \end{macrocode}
% build up a list of calls to |\@onefilewithoptions|
% (one for each package) without thrashing the parameter stack.
%    \begin{macrocode}
    \def\reserved@b##1,{%
      \ifx\@nil##1\relax\else
        \ifx\relax##1\relax\else
         \noexpand\@onefilewithoptions##1[{#2}][{#4}]%
         \noexpand\@pkgextension
        \fi
        \expandafter\reserved@b
      \fi}%
      \edef\reserved@a{\zap@space#3 \@empty}%
      \edef\reserved@a{\expandafter\reserved@b\reserved@a,\@nil,}%
  \fi
  \reserved@a}
\@onlypreamble\@fileswith@pti@ns
%    \end{macrocode}
%
% Have the main argument as |#1|, so we only need one |\expandafter|
% above.
% \changes{v0.2a}{1993/11/14}
%         {Moved reseting of \cs{default@ds}, \cs{ds@} and
%         \cs{@declaredoptions} here, from the end of
%         \cs{ProcessOptions}.}
% \changes{v0.2f}{1993/11/22}
%         {Made the initial version [] not [\cs{@unknownversion}]}
% \changes{v0.2m}{1993/12/07}
%         {Reset \cs{CurrentOption}}
%    \begin{macrocode}
\def\@onefilewithoptions#1[#2][#3]#4{%
  \@pushfilename
  \xdef\@currname{#1}%
  \global\let\@currext#4%
  \expandafter\let\csname\@currname.\@currext-h@@k\endcsname\@empty
  \let\CurrentOption\@empty
  \@reset@ptions
  \makeatletter
%    \end{macrocode}
% Grab everything in a macro, so the parameter stack is popped before
% any processing begins.
% \changes{v0.2s}{1994/01/17}
%         {Modify to reduce parameter stack usage}
% \changes{v1.1b}{1998/05/07}
%         {Modify help message for latex/2805}
%    \begin{macrocode}
  \def\reserved@a{%
    \@ifl@aded\@currext{#1}%
      {\@if@ptions\@currext{#1}{#2}{}%
        {\@latex@error
            {Option clash for \@cls@pkg\space #1}%
            {The package #1 has already been loaded
             with options:\MessageBreak
             \space\space[\@ptionlist{#1.\@currext}]\MessageBreak
             There has now been an attempt to load it
              with options\MessageBreak
             \space\space[#2]\MessageBreak
             Adding the global options:\MessageBreak
             \space\space
                  \@ptionlist{#1.\@currext},#2\MessageBreak
             to your \noexpand\documentclass declaration may fix this.%
             \MessageBreak
             Try typing \space <return> \space to proceed.}}}%
      {\@pass@ptions\@currext{#2}{#1}%
%    \end{macrocode}
% \changes{v0.3c}{1994/03/12}
%         {Do not use \cs{@pr@videpackage} to avoid typeout}
%    \begin{macrocode}
       \global\expandafter
       \let\csname ver@\@currname.\@currext\endcsname\@empty
       \InputIfFileExists
         {\@currname.\@currext}%
         {}%
         {\@missingfileerror\@currname\@currext}%
%    \end{macrocode}
% |\@unprocessedoptions| will generate an error for each specified
% option in a package unless a |\ProcessOptions| has appeared in the
% package file.
% \changes{v0.2v}{1994/01/29}
%         {All options raise error if no \cs{ProcessOptions} appears}
% \changes{v0.2x}{1994/02/02}
%         {Only run the hook and options check if the file was loaded.}
%    \begin{macrocode}
    \let\@unprocessedoptions\@@unprocessedoptions
    \csname\@currname.\@currext-h@@k\endcsname
    \expandafter\let\csname\@currname.\@currext-h@@k\endcsname
              \@undefined
    \@unprocessedoptions}
%    \end{macrocode}
%
%    \begin{macrocode}
    \@ifl@ter\@currext{#1}{#3}{}%
      {\@latex@warning@no@line
         {You have requested,\on@line,
          version\MessageBreak
            `#3' of \@cls@pkg\space #1,\MessageBreak
          but only version\MessageBreak
           `\csname ver@#1.\@currext\endcsname'\MessageBreak
          is available}}%
%    \end{macrocode}
% \changes{v0.2c}{1993/11/17}
%         {Added trap for two \cs{LoadClass} commands.}
%    \begin{macrocode}
    \ifx\@currext\@clsextension\let\LoadClass\@twoloadclasserror\fi
    \@popfilename
    \@reset@ptions}%
  \reserved@a}
\@onlypreamble\@onefilewithoptions
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@fileswith@pti@ns}
% Save the definition (for error checking).
% \changes{v0.2c}{1993/11/17}
%         {Macro added}
%    \begin{macrocode}
\let\@@fileswith@pti@ns\@fileswith@pti@ns
\@onlypreamble\@@fileswith@pti@ns
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@reset@ptions}
% Reset the default option, and clear lists of declared options.
% \changes{v0.2a}{1993/11/14}{macro added}
%    \begin{macrocode}
\def\@reset@ptions{%
  \global\ifx\@currext\@clsextension
    \let\default@ds\OptionNotUsed
   \else
    \let\default@ds\@unknownoptionerror
  \fi
  \global\let\ds@\@empty
  \global\let\@declaredoptions\@empty}
\@onlypreamble\@reset@ptions
%    \end{macrocode}
% \end{macro}
%
% \subsection{Hooks}
%
% Allow code do be saved to be executed at specific later times.
%
% Save things in macros, I considered using toks registers, (and
% |\addto@hook| from the NFSS code, that would require stacking the
% contents in the case of required packages, so just generate a new
% macro for each package.
% \begin{macro}{\@begindocumenthook}
% \changes{v1.0s}{1995/10/20}
%         {Make setting conditional, for autoload version}
% \begin{macro}{\@enddocumenthook}
% Stuff to appear at the begining or end of the document.
%    \begin{macrocode}
\ifx\@begindocumenthook\@undefined
  \let\@begindocumenthook\@empty
\fi
\let\@enddocumenthook\@empty
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\g@addto@macro}
% Globally add to the end of a macro.
% \changes{v0.2a}{1993/11/14}{Made global}
% \changes{v0.2w}{1994/01/31}
%     {Use toks register to avoid `hash' problems}
% \changes{v1.0o}{1995/05/17}
%     {Make long for latex/1522}
% \changes{v1.0w}{1996/12/17}
%     {Use \cs{begingroup} to save making a mathord}
% \changes{v1.0x}{1997/02/05}
%     {missing percent /2402}
%    \begin{macrocode}
\long\def\g@addto@macro#1#2{%
  \begingroup
    \toks@\expandafter{#1#2}%
    \xdef#1{\the\toks@}%
  \endgroup}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\AtEndOfPackage}
% \begin{macro}{\AtEndOfClass}
% \begin{macro}{\AtBeginDocument}
% \begin{macro}{\AtEndDocument}
% The access functions.
% \changes{v0.2a}{1993/11/14}
%         {Included extension in the generated macro name for package
%         and class hooks.}
%    \begin{macrocode}
\def\AtEndOfPackage{%
  \expandafter\g@addto@macro\csname\@currname.\@currext-h@@k\endcsname}
\let\AtEndOfClass\AtEndOfPackage
\@onlypreamble\AtEndOfPackage
\@onlypreamble\AtEndOfClass
%    \end{macrocode}
%
%    \begin{macrocode}
\def\AtBeginDocument{\g@addto@macro\@begindocumenthook}
\def\AtEndDocument{\g@addto@macro\@enddocumenthook}
\@onlypreamble\AtBeginDocument
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
%
% \begin{macro}{\@cls@pkg}
%    The current file type.
% \changes{v0.2i}{1993/12/03}
%         {Name changed to avoid clash with output routine.}
%    \begin{macrocode}
\def\@cls@pkg{%
  \ifx\@currext\@clsextension
    document class%
  \else
    package%
  \fi}
\@onlypreamble\@cls@pkg
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@unknownoptionerror}
% Bad option.
%    \begin{macrocode}
\def\@unknownoptionerror{%
  \@latex@error
    {Unknown option `\CurrentOption' for \@cls@pkg\space`\@currname'}%
    {The option `\CurrentOption' was not declared in
     \@cls@pkg\space`\@currname', perhaps you\MessageBreak
      misspelled its name.
     Try typing \space <return>
     \space to proceed.}}
\@onlypreamble\@unknownoptionerror
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@unprocessedoptions}
% Declare an error for each option, unless a |\ProcessOptions| occured.
% \changes{v0.2v}{1994/01/29}
%         {Macro added.}
% \changes{v1.0t}{1995/11/14}{Allow empty option}
%    \begin{macrocode}
\def\@@unprocessedoptions{%
  \ifx\@currext\@pkgextension
    \edef\@curroptions{\@ptionlist{\@currname.\@currext}}%
    \@for\CurrentOption:=\@curroptions\do{%
        \ifx\CurrentOption\@empty\else\@unknownoptionerror\fi}%
  \fi}
\@onlypreamble\@unprocessedoptions
\@onlypreamble\@@unprocessedoptions
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@badrequireerror}
% |\RequirePackage| or |\LoadClass| occurs in the options section.
% \changes{v0.2c}{1993/11/17}
%         {Macro added}
%    \begin{macrocode}
\def\@badrequireerror#1[#2]#3[#4]{%
  \@latex@error
    {\noexpand\RequirePackage or \noexpand\LoadClass
         in Options Section}%
    {The \@cls@pkg\space `\@currname' is defective.\MessageBreak
     It attempts to load `#3' in the options section, i.e.,\MessageBreak
     between \noexpand\DeclareOption and \string\ProcessOptions.}}
\@onlypreamble\@badrequireerror
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@twoloadclasserror}
% Two |\LoadClass| in a class.
% \changes{v0.2c}{1993/11/17}
%         {Macro added}
%    \begin{macrocode}
\def\@twoloadclasserror{%
  \@latex@error
    {Two \noexpand\LoadClass commands}%
    {You may only use one \noexpand\LoadClass in a class file}}
\@onlypreamble\@twoloadclasserror
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@twoclasseserror}
% Two |\documentclass| or |\documentstyle|.
% \changes{v0.2h}{1993/11/28}
%         {Macro added}
%    \begin{macrocode}
\def\@twoclasseserror#1#{%
  \@latex@error
    {Two \noexpand\documentclass or \noexpand\documentstyle commands}%
    {The document may only declare one class.}\@gobble}
\@onlypreamble\@twoclasseserror
%    \end{macrocode}
% \end{macro}
%
% \subsection{Providing shipment}
%
% \begin{macro}{\two@digits}
% Prefix a number less than 10 with `0'.
%    \begin{macrocode}
\def\two@digits#1{\ifnum#1<10 0\fi\number#1}
%    \end{macrocode}
% \end{macro}
%
%  \begin{macro}{\filecontents}
%  \begin{macro}{\endfilecontents}
%    This environment implements inline files.
%    The star-form does not write extra comments into the file.
%
% \changes{v0.2h}{1993/11/28}
%         {Don't globally allocate a write stream (always use 15)}
% \changes{v0.2r}{1993/12/19}{Different message when ignoring a file}
% \changes{v0.3g}{1994/04/11}
%         {Add star form,
%          dont write \cs{endinput} at the end of the file.}
% \changes{v1.0c}{1994/05/11}
%         {Add checks for form feed and tab}
% \changes{v1.0m}{1995/04/21}
%         {Close input check stream: latex/1487}
% \changes{v1.0p}{1995/05/25}{Delete \cs{filec@ntents} after preamble}
%    \begin{macrocode}
\begingroup%
\catcode`\*=11 %
\catcode`\^^M\active%
\catcode`\^^L\active\let^^L\relax%
\catcode`\^^I\active%
%    \end{macrocode}
%
%    \begin{macrocode}
\gdef\filecontents{\@tempswatrue\filec@ntents}%
\gdef\filecontents*{\@tempswafalse\filec@ntents}%
%    \end{macrocode}
%
%    \begin{macrocode}
\gdef\filec@ntents#1{%
  \openin\@inputcheck#1 %
  \ifeof\@inputcheck%
    \@latex@warning@no@line%
        {Writing file `\@currdir#1'}%
%    \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
%         {\cs{reserved@c} not \cs{verbatim@out} to save a csname}
%    \begin{macrocode}
    \chardef\reserved@c15 %
    \ch@ck7\reserved@c\write%
    \immediate\openout\reserved@c#1\relax%
  \else%
%    \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
%         {Use \cs{@gobbletwo}}
%    \begin{macrocode}
    \closein\@inputcheck%
    \@latex@warning@no@line%
            {File `#1' already exists on the system.\MessageBreak%
             Not generating it from this source}%
    \let\write\@gobbletwo%
    \let\closeout\@gobble%
  \fi%
  \if@tempswa%
%    \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
%         {\cs{@currenvir} in banner}
%    \begin{macrocode}
    \immediate\write\reserved@c{%
      \@percentchar\@percentchar\space%
          \expandafter\@gobble\string\LaTeX2e file `#1'^^J%
      \@percentchar\@percentchar\space  generated by the %
        `\@currenvir' \expandafter\@gobblefour\string\newenvironment^^J%
      \@percentchar\@percentchar\space from source `\jobname' on %
         \number\year/\two@digits\month/\two@digits\day.^^J%
      \@percentchar\@percentchar}%
  \fi%
  \let\do\@makeother\dospecials%
%    \end{macrocode}
%
% \changes{v1.0y}{1997/10/10}
%     {Check for text before or after \cs{end} environment. latex/2636}
%    \begin{macrocode}
  \edef\E{\@backslashchar end\string{\@currenvir\string}}%
  \edef\reserved@b{%
    \def\noexpand\reserved@b%
         ####1\E####2\E####3\relax}%
  \reserved@b{%
    \ifx\relax##3\relax%
%    \end{macrocode}
% There was no |\end{filecontents}|
%    \begin{macrocode}
      \immediate\write\reserved@c{##1}%
    \else%
%    \end{macrocode}
% There was a |\end{filecontents}|, so stop this time.
%    \begin{macrocode}
      \edef^^M{\noexpand\end{\@currenvir}}%
      \ifx\relax##1\relax%
      \else%
%    \end{macrocode}
% Text before the |\end|, write it with a warning.
%    \begin{macrocode}
          \@latex@warning{Writing text `##1' before %
             \string\end{\@currenvir}\MessageBreak as last line of #1}%
        \immediate\write\reserved@c{##1}%
      \fi%
      \ifx\relax##2\relax%
      \else%
%    \end{macrocode}
% Text after the |\end|, ignore it with a warning.
%    \begin{macrocode}
         \@latex@warning{%
           Ignoring text `##2' after \string\end{\@currenvir}}%
      \fi%
    \fi%
    ^^M}%
%    \end{macrocode}
%
%    \begin{macrocode}
  \catcode`\^^L\active%
  \let\L\@undefined%
  \def^^L{\@ifundefined L^^J^^J^^J}%
  \catcode`\^^I\active%
  \let\I\@undefined%
  \def^^I{\@ifundefined I\space\space}%
  \catcode`\^^M\active%
  \edef^^M##1^^M{%
    \noexpand\reserved@b##1\E\E\relax}}%
\endgroup%
%    \end{macrocode}
%
%    \begin{macrocode}
\begingroup
\catcode`|=\catcode`\%
\catcode`\%=12
\catcode`\*=11
\gdef\@percentchar{%}
\gdef\endfilecontents{|
  \immediate\closeout\reserved@c
  \def\T##1##2##3{|
  \ifx##1\@undefined\else
    \@latex@warning@no@line{##2 has been converted to Blank ##3e}|
  \fi}|
  \T\L{Form Feed}{Lin}|
  \T\I{Tab}{Spac}|
  \immediate\write\@unused{}}
\global\let\endfilecontents*\endfilecontents
\@onlypreamble\filecontents
\@onlypreamble\endfilecontents
\@onlypreamble\filecontents*
\@onlypreamble\endfilecontents*
\endgroup
\@onlypreamble\filec@ntents
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% \changes{v0.2f}{1993/11/22}
%         {\cs{@unknownversion} removed}
% \changes{v1.0j}{1994/10/18}
%         {Move \cs{listfiles} to ltfiles.dtx}
%
%    \begin{macrocode}
%</2ekernel>
%    \end{macrocode}
%
% \section{After Preamble}
% Finally we declare a package that allows all the commands declared
% above to be |\@onlypreamble| to be used after |\begin{document}|.
% \changes{v0.3f}{1994/03/16}
%         {Add pkgindoc package}
% \changes{v1.1a}{1998/03/21}
%         {Correct to new onlypreamble command list}
%    \begin{macrocode}
%<*afterpreamble>
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{pkgindoc}
         [1994/10/20 v1.1 Package Interface in Document (DPC)]
\def\reserved@a#1\do\@classoptionslist#2\do\filec@ntents#3\relax{%
  \gdef\@preamblecmds{#1#3}}
\expandafter\reserved@a\@preamblecmds\relax
%</afterpreamble>
%    \end{macrocode}
%
% \Finale