<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">% S H A P E P A R . S T Y
%
% Typeset paragraphs in various shapes.
%
% Version 2.1  (Sept 2006)
%
% Copyright (c) 1993,2002,2006    Donald Arseneau
% These definitions may be freely transmitted, reproduced, or modified
% provided that any modifications are clearly identified and this notice
% is left intact.
%
% \shapepar: a macro to typeset paragraphs in a specific shape. The
% size is adjusted automatically so that the entire shape is filled
% with text. There can be no displayed math, and no "\vadjust"
% material (no "\vspace").  These macros work for both LaTeX and plain
% TeX.  For LaTeX, specify \usepackage{shapepar}, or for either,
% \input shapepar.sty .  Configuration parameters are set just
% below here.  Instructions for use are given in the LaTeX document 
% shapepar.ltx; a short summary is given after \endinput below.
%
% ToDo:  
% Vertical correction for character height applied to shape.
% Shape-based bounding box and reference point for exact placement
% Allow multiple paragraphs and displayed math in shape
% Typeset shape text directly when fixed scale (or even always) (register conflicts)
% Allow text overflow from fixed scale shapes (for magazine style)
% More assertive \cutout processing
% 
%---------------------
% make file load whatever status of @ (hold codes in \squarepar temporarily)
\edef\squarepar
  {\catcode\string `\string @ \the\catcode `\@
   \catcode\string `\string $ \the\catcode `$
   \catcode\string `\string ! \the\catcode `\!
   \catcode\string `\string ^ \the\catcode `\^}
\catcode\string`\@=11  \catcode\string`\$=11
\catcode\string`\^=14  \catcode\string`\!=10

% ------ Configuration parameters ------

% horizontal separation between shaped par and cut-out text
\newskip\cutoutsep
\cutoutsep=12pt

% smallest gap allowed; smaller will be eliminated
\def\SmallestGap{.4em}

% small gap; smaller will be enlarged
\def\SmallGap{1em}

% smallest segment allowed; smaller will be omitted
\def\SmallestSegment{.2em}

% How many times will \shapepar try to get the size of the paragraph?
\chardef\ScaleMaxTries=9

% fineness of cutout matching to lines (number of reference points
% per line of text)
\chardef\RefineBaselines=3

% Vertical extension of cutout gap (fraction of \baselineskip)
\def\cutoutsepstretch{.5}

% --------------------------------------
\ifx\DeclareOption\undefined\else

 \ProvidesPackage{shapepar}[2006/09/11 v 2.1, Shaped paragraphs]
 \DeclareOption{quiet}{\catcode`\!=14}
 \DeclareOption{noisy}{\catcode`\^=10}
 \ProcessOptions

\fi
% --------------------------------------

% Define variables.  Use LaTeX names for some, and use aliases to
% LaTeX allocations and TeX parameters for many others.
% In the future, the descriptive names may disappear altogether.

\newdimen\SH@scale
\mathchardef\@dxii=512

\def\@empty{}
\long\def\@gobble#1{}
\ifx\@tempdima\undefined \csname newdimen\endcsname \@tempdima \fi
\ifx\@tempdimb\undefined \csname newdimen\endcsname \@tempdimb \fi
\ifx\@tempcnta\undefined \csname newcount\endcsname \@tempcnta \fi
\ifx\@tempcntb\undefined \csname newcount\endcsname \@tempcntb \fi
\ifx\@tempboxa\undefined \csname newbox\endcsname \@tempboxa \fi

\def\@tempa#1#2#3{%  {"count"|"dimen"|"box"|"skip"}{\myname}{\realname}
  \ifx\undefined#3\csname new#1\endcsname#2% allocate new one
  \else\let#2#3\fi % alias is defined, so use it
 }

\@tempa{box}\SH@boxa\rootbox
\newbox\SH@boxb                   % global
\@tempa{count}\SH@ntries\@cla     % global
\@tempa{dimen}\spec@bot\p@renwd
\@tempa{dimen}\spec@top\jot
\@tempa{dimen}\spec@height\@wholewidth
\@tempa{dimen}\spec@incr\@halfwidth
\@tempa{dimen}\spec@position\@picht
\@tempa{dimen}\spec@nextpos\@ovxx
\@tempa{dimen}\spec@prevpos\@ovyy
\@tempa{dimen}\spec@hcenter\@xdim
\@tempa{dimen}\SH@refbase\@ydim
\@tempa{dimen}\SH@dscale\dimen@i   % global
\@tempa{dimen}\SH@tottext\@toproom % global
\@tempa{dimen}\SH@posseg\@ovro
\@tempa{dimen}\SH@widseg\@ovri
\@tempa{dimen}\SH@posold\@ovdx
\@tempa{dimen}\SH@widold\@ovdy
\@tempa{dimen}\SH@weight\@dashdim
\@tempa{count}\SH@npslines\interdisplaylinepenalty
\@tempa{count}\SH@nline\@savsf
\@tempa{count}\SH@lowline\delimiterfactor
\@tempa{count}\SH@highline\doublehyphendemerits

\let\SH@margin\@empty
\let\SH@xoff\z@
\let\SH@yoff\z@

% ------- Begin main definitions -------

\def\cutout#1#2{%  #1 = r|l  #2 = (  or something else
  \par \endgraf
  \lowercase{\def\SH@margin{#1}}%
  \def\@tempa{#2}\def\@tempb{(}%
  \ifx\@tempa\@tempb \let\@tempb\SH@cutopt
  \else \def\@tempb{\SH@cutopt \z@,\z@)#2}%
  \fi \@tempb
}

\def\SH@cutopt #1,#2){% #1 = x-offset, #2 = y-offset
  \def\SH@xoff{#1}\def\SH@yoff{#2}%
  \edef\SH@cutoutbase{\the\baselineskip}%
  \ifx\SH@margin\@empty\else
     \def\@tempa{l}\ifx\SH@margin\@tempa\else \def\@tempa{r}\fi
     \ifx\SH@margin\@tempa\else
      \errhelp{The \string\cutout\space is ignored; the \string\shapepar\space
         will continue. }\errmessage{Shaped Paragraph Error:
         Cutout side \string"\SH@margin\string" not valid; should be l or r.}%
      \let\SH@margin\@empty
  \fi\fi
  \ifx\SH@margin\@empty\else \begingroup \fi
}

\def\Shapepar{\ifx\SH@margin\@empty \let\SH@usebox\box \fi \shapepar}
\let\SH@usebox\unvbox

\def\shapepar#1{\relax % #1 = shape specification or "["
  \begingroup
  \ifx\SH@margin\@empty \let\SH@xoff\z@ \let\SH@yoff\z@ \fi
  \if [\noexpand#1\relax \expandafter\SH@scaledshape
  \else \SH@scale\z@ \SH@start{#1}\fi
}

\def\SH@scaledshape #1]{\SH@scale #1\relax \SH@start}

\def\SH@start#1{% #1 = shape specification.  May be a macro.
  \edef\SH@restog{\global\SH@ntries\the\SH@ntries
   \global\SH@dscale\the\SH@dscale \global\SH@tottext\the\SH@tottext}%
  \ifx\SH@usebox\box\else \par \endgraf \fi
  \xdef\SH@pd{\ifvmode \the\prevdepth \else \z@ \fi}%
  \let\\\relax \xdef\SH@spec{#1}%
  \expandafter\SH@checkspec\SH@spec $%  check spec. $
  \hyphenpenalty10 \exhyphenpenalty10 % optimise
  \doublehyphendemerits10 \adjdemerits10
  \hfuzz\maxdimen
  \setbox\SH@boxa\vbox\bgroup % set whole text on one line
   \parindent\z@ \leftskip\z@skip % \rightskip set below
   % \spaceskip .333333emplus.8emminus.15em % optimise stretch
   \parfillskip\z@ plus\@ne fil
   \begingroup
    \linepenalty\@m \let\\\SH@newline
    \let\par\SH@endpar \hsize\maxdimen \rightskip\spaceskip
    \pretolerance\m@ne \hyphenpenalty 9000 % make discretionaries
    \ifx\textwidth\undefined\else \textwidth\hsize
      \linewidth\hsize \columnwidth\hsize \fi
    \def\vadjust{{\def\SH@dm{special vertical material}\the\everydisplay}}%
    \everydisplay{\errhelp{Press RETURN, and hope.}\errmessage
     {Shaped Paragraph Error: \SH@dm\space is illegal in a shaped paragraph}}%
    \noindent \penalty\@M \hskip\z@skip % allow hyphenation of first word
    \ignorespaces}

\def\SH@dm{display-math}

% Explicit \\ commands insert a marker (kern) that will later preserve a line-break
\def\SH@newline{\unskip\hfill\kern9sp\break\ignorespaces}

\def\SH@endpar{% Insert filler for fixed-scale paragraphs
    \ifdim\SH@scale&gt;\z@ \def~{\hfil\null\hfil\null\hfil\null\hfil\null}%
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\fi
    \xdef\SH@baseset{\noexpand\baselineskip\the\baselineskip \relax}%
    \endgraf \endgroup % still inside \vbox and \begingroup
   \SH@baseset
%  get tottext = total length / 256 because total length may be &gt; \maxdimen
   \setbox\@tempboxa\box\voidb@x \global\SH@tottext\z@
   \SH@sumlines % combine multiple lines -&gt; \@tempboxa; width/256 -&gt;\SH@tottext
^  \message{total text length = \the\wd\@tempboxa, or 256 x \the\SH@tottext;
^  \string\baselineskip=\the\baselineskip;}%
^  {\let\\\relax\message{Spec is: \SH@spec}}%
^  \message{spec height = \Pointless\spec@height. }%
   \unskip\unkern\unpenalty\unskip\unkern\unpenalty
   \setbox\SH@boxa\box\@tempboxa % all the text
   \ifdim\SH@scale&gt;\z@ % for specified fixed scale: only format once
     \global\SH@ntries\ScaleMaxTries
   \else % Automatic scaling.  Get a first-guess scale
     % Get 1/256 of total segment length into \@tempdima
     \@tempdima\z@ \spec@prevpos\z@
     \expandafter\SH@measline\SH@spec \\\delimiter
^    \message{Spec area/256 = \Pointless\@tempdima}%
%    scale = 1.01 * sqrt( [text_length/256]*\baselineskip / [spec_area/256] )     
%    Pull out some large factors from square-root to extend numeric range
%    available for division.
     \SH@dscale=1.01\p@ % optimize
     \loop \if\AbsVal\@tempdima&lt;\p@
        \multiply\@tempdima\@cclvi \multiply\SH@dscale\sixt@@n
     \repeat
     \SH@scale=\Pointless\SH@tottext\baselineskip
     \fpdivide\SH@scale\@tempdima
     \sqrtofdim\SH@scale
     \SH@scale=\Pointless\SH@dscale\SH@scale 
^    \message{Initial scale = \the\SH@scale}%
     \global\SH@ntries\z@ % will count maximum \ScaleMaxTries trial scales
   \fi
   \global\SH@dscale\z@
   \SH@parpars \SH@tryparshape}

% Measure the area covered by segments in the shape spec.  Accumulate
% as length \@tempdima

\def\SH@measline#1#2\\#3{% #1 = this pos, #2 = segments, #3 = next pos
   \ifx\delimiter#3\expandafter\@gobble\else
      % Vertical space multiplier -&gt; tempdimb -&gt; \@tempa (temporarily)
      \@tempdimb #3\p@ \advance\@tempdimb-\spec@prevpos \divide\@tempdimb\@dxii
      \edef\@tempa{\Pointless\@tempdimb}%
      \SH@measseg #2t\fam\fam
      \spec@prevpos#1\p@
      \expandafter\SH@measline
   \fi {#3}}

% Recursively measure and accumulate widths of text segments on a line.
% Invoke as \SH@measseg &lt;segments&gt;t\fam\fam, as the "t\fam\fam" serves
% as an end-marker. All the widths are scaled by a factor \@tempa and
% added to \@tempdima.  (Overwrites \@tempdimb.)

\def\SH@measseg#1t#2#3{% #1 = stuff before "t", #2,#3 = posn,wid
   \ifx \fam #3\else
     \@tempdimb #3\p@
     \advance\@tempdima\@tempa\@tempdimb
     \expandafter\SH@measseg
   \fi}

% \SH@tryparshape: try a parshape with scale factor \SH@scale for \SH@spec
% For a given scale, it would take x lines of text to cover the shape,
% but only an integer number of lines (counted by \SH@nline) will be
% used.  The excess is evenly distributed at the top and bottom to preserve
% the symmetry of shapes.  The starting point is thus:
%
% spec_top + 1/2 * { spec_height - floor[ (spec_height-delta)/incr ]*incr }
%

\def\SH@tryparshape{%
  \advance\SH@scale\SH@dscale % shift scale factor by delta
^ \message{------------------------------------------------------------------------}%
! \message{(\the\SH@ntries) Try shape with scale \the\SH@scale. \space
!    (Delta = \Pointless\SH@dscale). \space }%
  \spec@incr\baselineskip \fpdivide\spec@incr\SH@scale
  \spec@position\spec@height \advance\spec@position-.3\spec@incr % height-delta
  \SH@nline\spec@position \divide\SH@nline\spec@incr % number of lines
  \spec@position-\SH@nline\spec@incr % - height of n lines
  \advance\spec@position\spec@height % difference from desired height
  \divide\spec@position\tw@ % half the excess
  \advance\spec@position\spec@top % starting position
  \xdef\spec@firstposition{\the\spec@position}%
  \SH@widold-\maxdimen
  \SH@makeparshape}

\def\SH@makeparshape{%
  \advance\spec@position-\spec@incr % pre-decrement
  \SH@nline\z@ % initialize counter for lines
  \spec@prevpos \spec@top % -\maxdimen% \spec@position
  \let\SH@Prevspec\@empty
  \let\@elt\relax % simply accumulate lines (reverse order)
  \gdef\SH@parshape{}\gdef\SH@lines{}\SH@npslines\z@
% \message{Parsing spec, starting at \Pointless\spec@position. }%
  \expandafter \SH@doaline \SH@spec \\\delimiter $\\$}
% this macro ends instead of continuing with \SH@done so TeX will use
% tail-recursion as \SH@tryparshape is iterated.
  
\def\SH@doaline{\SH@updps \SH@widold-\maxdimen
  \advance\SH@nline\@ne \advance\spec@position\spec@incr
  \let\\\SH@findpos \\}

% Get spec lines appropriate for given position (\spec@position):
% \SH@prevspec,\spec@prevpos for spec line above
% \SH@nextspec,\spec@nextpos for spec line below
% (lines may contain several segments)
%
\def\SH@findpos#1#2\\{%  #1 = spec line vert position, #2 = segments
  \ifx\delimiter#1\let\\\SH@dopara
  \else
     \ifdim#1\p@&lt;\spec@prevpos \SH@backup{#1}\fi % handle backspace
     \ifdim#1\p@&gt;\spec@position
        \def\SH@nextspec{#2{}}\spec@nextpos#1\p@ \def\\{\SH@found{#1}#2\\}%
        \expandafter\def\expandafter\SH@prevspec\expandafter{\SH@Prevspec}%
     \else
        \def\SH@Prevspec{#2{}}\spec@prevpos#1\p@
  \fi\fi \\}

\def\SH@found{% calculate weights to interpolate
%  \message{ -- \number\SH@nline\space-- SH@found \the\spec@position\space 
%      between \the\spec@prevpos\space and \the\spec@nextpos. }%
  \ifdim\spec@position&lt;\spec@prevpos
    \let\SH@next\SH@doaline
  \else
    \SH@weight\spec@position \advance\SH@weight-\spec@prevpos
    \@tempdimb\spec@nextpos  \advance\@tempdimb-\spec@prevpos
    \fpdivide\SH@weight\@tempdimb % weight = interpolation factor
    \let\SH@next\SH@dosegment
  \fi  
  \SH@next}

\def\SH@backup#1{%\tracingall
%  \message{Backup for #1 after \Pointless\spec@prevpos, seeking \Pointless\spec@position. }%
  \ifdim#1\p@&lt;\spec@position
     \advance\SH@nline\m@ne 
     \advance\spec@position-\spec@incr 
     \advance\spec@prevpos-\spec@incr
     \SH@backup{#1}%
  \fi}

% Get the position and width of a segment of text by taking the weighted
% average of the specifications from above and below (weighted by nearness).
% We iterate \SH@dosegment while it handles the segments
% Most of the confusing bits here are hueristics to deal with narrow gaps.
% If a gap between two texts is less than a space, the texts are joined
% over the gap.  If the gap is less than 1em, the gap is increased to the
% average of 1em and the given gap.

\def\SH@dosegment{% do a segment of text on this line
  \SH@posseg\z@ \SH@widseg\z@
  \advance\SH@weight-\p@ \SH@weight-\SH@weight % w1 = 1 - w2
  \SH@getseg A\SH@prevspec % Above
  \advance\SH@weight-\p@ \SH@weight-\SH@weight % w2 = 1 - w1
  \SH@getseg B\SH@nextspec % Below
  \ifdim\SH@widseg&gt;10sp
     \SH@widseg\Pointless\SH@scale\SH@widseg
     \advance\SH@posseg-\spec@hcenter
     \SH@posseg\Pointless\SH@scale\SH@posseg
     \advance\SH@posseg.5\hsize
%    Here are the small-gap heuristics.  \@tempdima is the gap and the shift
     \ifdim\SH@widold&gt;10sp
        \@tempdima\SH@posseg
        \advance\@tempdima-\SH@posold \advance\@tempdima-\SH@widold %gap
        \ifdim\@tempdima&lt;\SmallestGap % gap too small; eliminate
^          \message{Gap is \the\@tempdima--eliminate. }%
           \advance\SH@widold\@tempdimb \advance\SH@widold\SH@widseg % no update
        \else
           \ifdim\@tempdima&lt;\SmallGap % gap small; enlarge it if text not too small
              \ifdim\SH@widold&gt;\SmallGap \ifdim\SH@widseg&gt;\SmallGap
^                   \message{Gap is \the\@tempdima--enlarge}%
                    \@tempdima-.25\@tempdima \advance\@tempdima.25em
^                   \message{by 2 x \the\@tempdima. }%
                    \advance\SH@widold-\@tempdima
                    \advance\SH@widseg-\@tempdima
                    \advance\SH@posseg \@tempdima
           \fi\fi\fi
           \SH@updps
        \fi
     \else % no previous, so no update.  Just hold.
        \SH@widold\SH@widseg \SH@posold\SH@posseg
  \fi\fi
  \ifx\SH@prevspec\@empty \let\SH@next\SH@doaline \fi
  \ifx\SH@nextspec\@empty \let\SH@next\SH@doaline \fi
  \SH@next}

\def\SH@updps{% Update parshape with `new' info
^\message{Segment \Pointless\SH@posold, \Pointless\SH@widold}%
\ifdim\SH@widold&gt;\SmallestSegment
! \message{.}%
  \xdef\SH@parshape{\SH@parshape\the\SH@posold\the\SH@widold\space}%
  \xdef\SH@lines{\@elt{\the\SH@nline}{\the\SH@posold}{\the\SH@widold}\SH@lines}%
  \advance\SH@npslines\@ne
\fi \SH@widold\SH@widseg \SH@posold\SH@posseg}
   
\def\SH@getseg#1#2{% A/B, spec
  \ifx#2\@empty \SH@sperror \fi
  \expandafter \SH@GetseG #2$#1#2}

\def\SH@GetseG#1#2$#3#4{% command, rest of spec, $, A/B, spec
   \expandafter \ifx\csname spec#3$#1\endcsname \relax 
     \SH@sperror
   \else
     \csname spec#3$#1\endcsname #2$#4%
   \fi}

% b{pos}         begin text at a point at horizontal position pos.
% e{pos}         end text at a point at horizontal position pos.
% t{pos}{len}    make a block of text at position pos with length len
% s              split text (begin whitespace)
% j              join two text blocks (end a gap)

% Behavior of specs Above:
\def\specA$b#1{\specA$t{#1}{0}}%  b(pos) -&gt; t(pos)(0)
\def\specA$e#1#2{\csname specA$#2\endcsname}%  e(pos) ignore
\def\specA$s#1{\csname specA$#1\endcsname}%  s ignore % should never happen
\def\specA$t#1{\advance\SH@posseg#1\SH@weight \@spec$t jt{#1}}

% Behavior of specs Below:
\def\specB$e#1{\specB$t{#1}{0}}
\def\specB$b#1#2{\csname specB$#2\endcsname}
\def\specB$j#1{\csname specB$#1\endcsname}
\def\specB$t#1{\advance\SH@posseg#1\SH@weight \@spec$t st{#1}}

\def\@spec$t#1#2#3#4#5{% j|s  t  pos  wid  next
      \if t#2\else \SH@sperror \fi
      \advance\SH@widseg#4\SH@weight
      \if#1#5\relax % next is s (below) or j (above): unite two t
        \let\@tempa\@spec$t \else \let\@tempa\SH@redefine \fi
      \@tempa #5}

\def\SH@redefine#1$#2{\def#2{#1}}
\let\specA$\SH@redefine % bug fix to allow disjoint pieces
\let\specB$\SH@redefine

\def\SH@dopara#1${%  eat remaining spec and test parshape $
\global\setbox\SH@boxb\vbox{%
  \advance\SH@npslines\@ne
  \parshape\the\SH@npslines\space \SH@parshape \z@ \maxdimen
  \advance\SH@npslines\m@ne
! \message{Formatting. }%
  \noindent \unhcopy\SH@boxa \endgraf
! \message{Expected \the\SH@npslines\space lines;
!    got \the\prevgraf\space lines}%
  \ifnum\prevgraf=\SH@npslines % maybe right size; check last line
     \ifdim\SH@widseg&gt;\z@ % yes, we can check
        \ifnum\SH@ntries&lt;\ScaleMaxTries % safe to screw around with \SH@npslines
           \SH@grablast \@tempdima\wd\SH@boxa \advance\@tempdima 20\p@
           \ifdim\@tempdima&lt;.8\SH@widseg % final line underfull % optimise
!             \message{but the last line is too empty. }%
              \advance\SH@npslines\@ne % flag underfullness
  \fi\fi\fi\fi
  \ifnum\prevgraf=\SH@npslines % right size, done
     \aftergroup\SH@done \global\SH@dscale\z@
  \else % Try a new scale factor
     \ifdim\SH@dscale=\z@ % no previous step.  Try to guess a good one
        \ifnum\prevgraf&lt;\SH@npslines % underfull
^          \message{First underfull. }%
           \@tempdima\prevgraf\p@ 
           \divide\@tempdima\SH@npslines
        \else % overfull
^          \message{First overfull. }%
           \SH@grablast 
           \@tempdimb-\wd\SH@boxa \advance\@tempdimb-20\p@
           \divide\@tempdimb\@cclvi
           \@tempdima\SH@tottext \advance\@tempdimb\@tempdima
           \fpdivide\@tempdima\@tempdimb 
^          \message{overfullness: \the\wd\SH@boxa; ratio: \Pointless\@tempdima}%
        \fi
        \sqrtofdim\@tempdima
        \advance\@tempdima-\p@
        \divide\@tempdima\tw@
        \global\SH@dscale\Pointless\@tempdima\SH@scale
        \gdef\SH@fac{1}% % optimise
     \else % Not first step, scale from previous
        \ifnum\prevgraf&gt;\SH@npslines % overflow now
           \ifdim\SH@dscale&gt;\z@  % previous Overflow
              \global\SH@dscale \SH@fac\SH@dscale
           \else % overflow now, but previous underflow
              \gdef\SH@fac{.53}% % optimise
              \global\SH@dscale -\SH@fac\SH@dscale
           \fi
        \else  % underflow now
           \ifdim\SH@dscale&gt;\z@  % previous Overflow
              \gdef\SH@fac{.54}% % optimise
              \global\SH@dscale -\SH@fac\SH@dscale
           \else % overflow now, but previous underflow
              \global\SH@dscale \SH@fac\SH@dscale
           \fi
        \fi 
     \fi
     \ifdim-\SH@dscale&gt;.6\SH@scale
          \global\SH@dscale -.6\SH@scale  % avoid scale --&gt; 0 !
     \fi
     \global\advance\SH@ntries\@ne
     \ifdim\AbsVal\SH@dscale &lt;.005\p@ \global\SH@ntries\@cclv \fi
     \ifnum \SH@ntries&gt;\ScaleMaxTries \aftergroup\SH@done
     \else \aftergroup\SH@tryparshape
  \fi\fi
}}% end \vbox,  end macro.  Must not insert anything between braces!

% Get last hbox off list; rebox it into \SH@boxa, omitting final glue
%
\def\SH@grablast{\unskip\unkern\unskip\unpenalty
  \setbox\SH@boxa\lastbox
  \ifhbox\SH@boxa
    \setbox\SH@boxa\hbox{\unhbox\SH@boxa\unskip\unskip\unpenalty}%
  \fi}

\def\SH@parpars{%
   \lineskiplimit-0\p@ \linepenalty\thr@@
   \tolerance9999
   \ifx\emergencystretch\undefined % TeX2
     \rightskip\z@ plus.5emminus.2em % optimise
   \else \rightskip\z@skip \emergencystretch 3em % TeX 3
   \fi \pretolerance\m@ne 
   \hbadness\@MM \hfuzz\maxdimen % avoid formatting warning messages
   \SH@baseset
}

\def\SH@done{\SH@parpars
  \skip@ 1spplus2\p@ minus\p@
  \parfillskip.5\maxdimen % this will drag text to the bottom point.
  \advance\SH@npslines\@ne
  \SH@reform % reformat paragraph with new parfillskip
  \ifx\SH@usebox\box % boxed \Shapepar: find min pos
    \let\@elt\SH@measureh \SH@posold\maxdimen \SH@lines
  \else
    \SH@posold\z@
  \fi
% {\let\@elt\relax \message{SH@lines: \SH@lines. }}%
  \SH@nline\m@ne \SH@highline-\@m \SH@lowline\m@ne \let\@elt\SH@restack
^ \message{Restacking.}%
  % re-stack segments and re-justify lines; put in \vtop or \vbox appropriately
  \global\setbox\SH@boxb \ifx\SH@margin\@empty \vbox \else \vtop \fi {%
     \setbox\SH@boxa\vbox{}\leftskip=\z@ plus55sp minus99sp % optimise
     \unvbox\SH@boxb
     \SH@lines \unvbox\SH@boxa
     \ifnum\SH@highline&lt;\SH@lowline
       \nobreak
       % \message{After restack, \the\SH@highline&lt;\the\SH@lowline,}
       \advance\SH@lowline-\SH@highline
       % \message{so skip down \the\SH@lowline\space lines. }%
       \vskip\SH@lowline\baselineskip
     \fi
  }% Now we have final \SH@boxb
  \ifx\SH@margin\@empty % stand-alone
     \egroup % end original \setbox\SH@boxa\vbox\bgroup; but \SH@boxa is useless
     \ifx\SH@usebox\unvbox % ordinary \shapepar
        \unvbox\SH@boxb \prevdepth\SH@pd
     \else % boxed \Shapepar
        \vtop{\unvbox\SH@boxb}%
        \ifvmode
          \hrule height-\SH@pd width\z@
          \hbox{\vrule depth\SH@pd width\z@}%
        \fi
     \fi
     \SH@restog % restore global registers
     \endgroup % forgets many local parameters. \prevdepth is global
  \else % \cutout\shapepar Placed on margin of cutout text
     \SH@docutout
  \fi
  \let\SH@usebox\unvbox % completely finished!
  \let\SH@margin\@empty
  \SH@ignorepar
}

% Note on height and depth:  
% Ordinary \shapepar uses \unvbox, which ignores ordinary \baselineskip
% figuring, so we start the final formatting of the shape with the 
% prevdepth from outside and above.  We use the depth of the \vbox
% to set the \prevdepth after unboxing it.  We can't record \prevdepth
% from inside because we strip off a box from the bottom.
% \Shapepar emits the shape in a box. The best way to do that is to
% record the depth of the \vbox, rebox it as a \vtop (emitted) and then,
% if vertical mode, make a strut with the proper depth. (Merely setting
% \prevdepth gets the inter-line skips right, but not the placement at
% the bottom of a page.)

% Finally, \cutout requires a \smashed \vtop (only depth removed due to 
% the strange behavior of \vtop).

\def\SH@reform{%
\global\setbox\SH@boxb\vbox\bgroup
! \message{Reformat paragraph with \string\rightskip = \the\rightskip.}%
  \advance\parfillskip-\rightskip \advance\parfillskip-\leftskip
  \parshape\the\SH@npslines\space \SH@parshape \z@ .5\maxdimen
  %% Maybe use prevdepth from outside, penalty puts \parskip and favors breaks
  \ifx\SH@margin\@empty \ifx\SH@usebox\unvbox
     \prevdepth\SH@pd \ifdim\SH@pd&gt;-\@m\p@ \penalty-50 \fi
  \fi \fi 
  \noindent \unhcopy\SH@boxa \unskip\unskip\unpenalty 
  \lower\dp\strutbox\hbox{}% depth-only strut (\@finalstrut not defined in plain TeX)
  \penalty-\@M\hbox{\kern\maxdimen}\endgraf
  \ifnum\prevgraf=\SH@npslines % good, it worked.
    \setbox\SH@boxa\lastbox \unskip\unpenalty % remove mongo last box
    \egroup % end \SH@boxb, just above
    \xdef\SH@pd{\the\dp\SH@boxb}%
  \else % something wrong, increase flexibility and try again
    \egroup % end \SH@boxb, just above
    \ifnum\skip@&lt;64 % try again
       \advance\rightskip\skip@
       \multiply\skip@\tw@
       \expandafter\expandafter\expandafter \SH@reform
  \fi\fi}

\def\SH@measureh#1#2#3{% line num, shift, width
  \ifdim#2&lt;\SH@posold \SH@posold#2\relax \fi
}

\def\SH@restack#1#2#3{% line num, shift, width
  \unpenalty \skip@\lastskip \unskip \unpenalty
  \advance\skip@\lastskip \unskip \unpenalty\unpenalty
  \setbox\@tempboxa\lastbox
  \setbox\SH@boxa\vbox{%
     \ifhbox\@tempboxa
        \advance\SH@posold-#2% Trim box for \Shapepar
        \moveright-\SH@posold \hbox to#3
        {\hskip\leftskip \unhbox\@tempboxa \unskip \hskip\leftskip}%
        \nobreak
     \fi
     \vskip\skip@
     \ifnum\SH@nline&gt;\z@ \begingroup
       \count@=#1 \advance\count@-\SH@nline \advance\count@\@ne
       \vskip-\count@\baselineskip
     \endgroup\fi
     \unvbox\SH@boxa}%
  \SH@nline#1\relax
  % Keep track of line num for last box (\SH@highline) and
  % lowest box on page (\SH@lowline) 
  \ifnum\SH@highline=-\@m \SH@highline\SH@nline \fi
  \ifnum\SH@lowline&lt;\SH@nline \SH@lowline\SH@nline \fi
}

% Find and record parameters about the shape spec:
% \spec@hcenter:  Horizontal center of spec
% \spec@top: Vertical position at top of spec
% \spec@bot: Vertical position at bottom of spec
% \spec@height: difference between them
% \spec@left: Horizontal position at leftmost point of spec (macro)
% \spec@width: Total width of spec (macro)
% \spec@area: Area covered by spec
% All in whatever units are used by the spec itself.
%
\def\SH@checkspec#1#2#3#4${% h-center, v-origin, "b", rest of spec
   \ifx b#3\else \SH@sperror \fi
   \spec@hcenter#1\p@ \spec@top#2\p@
   \spec@bot-\maxdimen \spec@prevpos-\maxdimen
   \gdef\SH@spec{{#2}b#4}%
   %  Measure vertical extrema and check for valid backspacing
   \let\\\SH@CheckSpecLine
   \\{#2}b#4\\{-12345.6}\\[$%
   \ifdim\spec@bot&lt;-\@M\p@ \SH@sperror \fi
   %  Measure horizontal extrema
   \spec@height\spec@bot \advance\spec@height-\spec@top
   \SH@posold\maxdimen \SH@widold-\maxdimen\relax
   \SH@CheckSpecSeg b#4\delimiter
   \edef\spec@left{\Pointless\SH@posold}%
   \advance\SH@widold-\SH@posold \edef\spec@width{\Pointless\SH@widold}%
^  \message{Spec top: \Pointless\spec@top, bottom: \Pointless\spec@bot, height: 
^         \Pointless\spec@height, left: \spec@left, width: \spec@width. }%
}

%  Record vertical positions.

\def\SH@CheckSpecLine#1#2\\{\ifdim#1\p@&lt;-\@M\p@ % finished
     \def\\[${}% $
  \else
     \ifdim#1\p@&gt;\spec@bot \spec@bot #1\p@\relax \fi
     \ifdim#1\p@&lt;\spec@prevpos % allow backspace only between pieces
        \if\SH@only@b#2;\@empty \spec@prevpos#1\p@
        \else \SH@sperror
           \spec@bot-\p@ \def\\##1[${}% $ eat rest
        \fi
     \else \spec@prevpos#1\p@
  \fi\fi \\}

\def\SH@only@b #1#2{% return bb if only "b" specs until ";"
  \if b\noexpand#1\expandafter\SH@only@b
  \else \if ;\noexpand#1bb\else ab\fi
  \fi}
  
%  Record horizontal positions.  These are not used, but they anticipate
%  a shape-based bounding box.

\def\SH@CheckSpecSeg#1#2#3{%
  \ifx t#1\relax \SH@SaveSpecSeg{#2}{#3}\else
  \ifx b#1\relax \SH@SaveSpecSeg{#2}0\else
  \ifx e#1\relax \SH@SaveSpecSeg{#2}0\fi\fi\fi
  \ifx\delimiter#3\def\SH@CheckSpecSeg##1##2{}\fi
  \SH@CheckSpecSeg{#2}{#3}}

\def\SH@SaveSpecSeg#1#2{%
  \SH@posseg#1\p@\relax
  \ifdim\SH@posseg&lt;\SH@posold \SH@posold\SH@posseg \fi
  \advance\SH@posseg#2\p@\relax
  \ifdim\SH@posseg&gt;\SH@widold \SH@widold\SH@posseg \fi
  \relax
}

% Grab all the hboxes in the preceding list, combine their contents in
% \@tempboxa (removing \rightskip, separating with space), and give 
% SH@tottext = total_width / 256 (note that the total width may be 
% greater than \maxdimen)
%
\def\SH@sumlines{\SH@grablast 
\ifhbox\SH@boxa
  \@tempdima\wd\SH@boxa \divide\@tempdima\@cclvi 
  \global\advance\SH@tottext\@tempdima
  \setbox\@tempboxa\hbox{%
     \unhbox\SH@boxa
     \ifdim\lastkern=9sp \hfill\break \fi 
     \ifvoid\@tempboxa\else \unhbox\@tempboxa \fi
  }% Repeat until complete:
  \expandafter\SH@sumlines
\fi}

\def\SH@sperror{\errhelp{It would be amazing if you can continue after
  this error.}\errmessage
  {Shaped Paragraph Error:  Error in specification.  Check carefully!}}%

%  Do the cutout in the surrounding text.  Do so by regenerating
%  the a \parshape (\SH@lines actually) with a smaller line spacing.
%  Whichever of those lines fall near each line in the outer cutout
%  text contribute to the outer parshape.

\def\SH@docutout{%
   % \message{\string\SH@docutout, with initial y-pos=\the\spec@position, scale=\the\SH@scale. }%
   \spec@position-\SH@yoff\relax \fpdivide\spec@position\SH@scale
   \advance\spec@position\spec@firstposition
   % \message{Spec position of first outer line is \the\spec@position. }%
   % line spacing of surrogate is fraction of the outer baselines.
   % Determine surrogate's "refined" baseline-skip (\SH@refbase),
   % its shape-spec increment (\spec@incr) and the number of lines
   % corresponding to the vertical (expanded) cutout-sep (\SH@highline)
   % Temporarily, \SH@posold is "shoulder" - height of octagon's corner.
   \SH@refbase\SH@cutoutbase
   \@tempdima\cutoutsep
   \SH@posold.414\cutoutsep
   \advance\@tempdima\cutoutsepstretch\SH@refbase % not refbase but cutoutbase
   \advance\SH@posold\cutoutsepstretch\SH@refbase
   \divide\SH@refbase\RefineBaselines % examine multiple positions per line
   % \message{Vertical gap \the\@tempdima, with refined spacing \the\SH@refbase. }%
   \divide\@tempdima\SH@refbase
   \SH@highline\@tempdima \SH@lowline-\SH@highline
   \spec@incr\SH@refbase
   \fpdivide\spec@incr\SH@scale
   % Pre-calculate excluded octagon shape (\SH@posold is "shoulder")
   \begingroup
     \gdef\SH@octcase{}\let\or\relax \SH@nextoctcase
     \xdef\SH@octcase{\noexpand\ifcase\SH@highline\SH@octcase\z@\noexpand\fi}%
     %\toks@\expandafter{\SH@octcase}\message{Octagon cases are: \the\toks@ }%
   \endgroup
   \SH@lowline-\SH@highline
   %\message{Range of lines of interest: \the\SH@lowline\space to \the\SH@highline. }%
   \advance\SH@lowline\@ne \advance\SH@highline\@ne
   % Generate the surrogate refined-lines shape
   \def\SH@dopara##1${}%  Don't typeset the refined shape; just gobble to $
   \SH@makeparshape % Get \SH@lines
   % Record highest line number in \SH@lines
   \let\@elt\SH@getmaxline \SH@nline\z@ \SH@lines
   % Use \SH@widold ("hold") to retain:  x_off +/- (.5 hsize)
   \SH@widold\SH@xoff \advance\SH@widold\if l\SH@margin-\fi .5\hsize
   % Use \SH@posold ("hold") for initialization for outermost position
   \if l\SH@margin\relax
      \def\@tempb##1##2{##1##2}%
      \SH@posold -\SH@widold
   \else 
      \def\@tempb##1##2{\z@##1}%
      \SH@posold\hsize \advance\SH@posold-\SH@widold
   \fi
   % Build cutout's parshape in \SH@parshape
   \gdef\SH@parshape{\@empty\@empty\@empty}\SH@npslines\z@
   \expandafter\let\expandafter\@elt\csname SH@mostopposite\SH@margin\endcsname
   \SH@cutoutline % Builds parshape
   % Pull out indentation of first line
   \afterassignment\SH@dopara % a type of "gobble", see a bit above
   \@tempdima\SH@parshape $% the $ terminates gobble
   \advance\@tempdima-\SH@xoff
   \xdef\SH@xoff{-\the\@tempdima}%
   % Now finalize the parshape lines
   \advance\SH@npslines\@ne
   \xdef\SH@parshape{\number\SH@npslines\space\SH@parshape \z@\hsize}%
   \egroup % end original \setbox\SH@boxa\vbox\bgroup; but \SH@boxa is useless
   \SH@restog % restore global registers
  \endgroup% Have the parshape; end group started by \shapepar
  \global\setbox\SH@boxb\rlap{%
    \kern\if\SH@margin l-\fi.5\hsize
    \kern\SH@xoff
    \lower\SH@yoff \box\SH@boxb
  }%
  % Encourage page break above
  \@tempdima\dp\SH@boxb
  \advance\@tempdima-\SH@cutoutbase
  \advance\@tempdima\cutoutsep
  \dp\SH@boxb\z@
  \vskip \z@ plus .3\@tempdima % optimize
  \penalty \@cclv % optimize
  \vskip \z@ plus -.3\@tempdima % undo above skip
  \ifdim20\p@&lt;\@tempdima % optimize
    \vskip \@tempdima plus 9\p@ % optimize
    \penalty \@m % optimize
    \vskip -\@tempdima plus -9\p@ % undo above skip
  \fi
  \noindent % Outer text is not indented.  To indent, use \indent.
  \vadjust{\penalty\@M \vskip\@tempdima
           \penalty9999 % exercise page builder
           \vskip-\@tempdima}%
  \endgroup % end group started by \cutout; out of all groups
  %\message{Parshape:  \noexpand\parshape\SH@parshape }%
  \parshape\SH@parshape
  \box\SH@boxb
}

% for r  indent = 0pt (done by \@tempb)
%        width  = leftmost_pos  + x_offset + ( .5\hsize - gap )
% for l  indent = rightmost_pos + x_offset - ( .5\hsize - gap )
%        width  = \hsize - indent
% Because I allow backspacing, I can't go through the spec, building
% the parshape.  Instead, I have to scan the whole spec, or rather, its
% instantiation in \SH@lines, for every line of the \parshape...
% Well, I *could* sort the instantiation first; then I could move
% though it sequentially.
%
% Here I am re-using some scratch variables:
% \SH@posold = +/- \maxdimen -- starting value of rightmost/leftmost
% \SH@widold = x_offset +/- ( .5\hsize )
% \SH@posseg = leftmost/rightmost position
% \SH@nline  = highest number of \@elt lines in \SH@lines

\def\SH@cutoutline{%
  \ifnum\SH@lowline&gt;\SH@nline
    \let\SH@cutoutline\relax
  \else
    \SH@posseg\SH@posold
    \advance\SH@npslines\@ne
    %\message{SH@cutoutline \the\SH@npslines\space between \the\SH@lowline\space and \the\SH@highline. }%
    \SH@lines % Use \@elt to get leftmost/rightmost at this line
    %\message{ posseg \the\SH@posseg, posold \the\SH@posold. }%
    \advance\SH@posseg \SH@widold
    {\advance\hsize-\SH@posseg
    \xdef\SH@parshape{\SH@parshape \@tempb{\the\SH@posseg}{\the\hsize}}}%
  \fi 
  \advance\SH@highline\RefineBaselines  \advance\SH@lowline\RefineBaselines
  \SH@cutoutline}

% choose leftmost position among \SH@posseg and lines near \SH@nline
\def\SH@mostoppositer#1#2#3{% #1: line, #2: indent, #3: width
  \ifnum #1&lt;\SH@lowline\else
     \ifnum #1&gt;\SH@highline\else
        \advance\SH@highline-#1
        % \message{Compare #2 #3 at #1. Case \the\SH@highline: \SH@octcase}%
        \dimen@#2\advance\dimen@-\SH@octcase\relax
        \ifdim \dimen@&lt;\SH@posseg \SH@posseg\dimen@\fi
        \advance\SH@highline#1
  \fi\fi}

% choose rightmost position among \SH@posseg and lines near \SH@nline
\def\SH@mostoppositel#1#2#3{% #1: line, #2: indent, #3: width
  \ifnum #1&lt;\SH@lowline\else
     \ifnum #1&gt;\SH@highline\else
        \advance\SH@highline-#1
        \dimen@#2\advance\dimen@#3\advance\dimen@\SH@octcase\relax
        % \message{Compare #2 #3 at #1. Case \the\SH@highline=\SH@octcase: \the\dimen@}%
        \ifdim \dimen@&gt;\SH@posseg \SH@posseg\dimen@\fi
        \advance\SH@highline#1
  \fi\fi}

%\def\SH@updCOlines{% Update list of lines for cut-out
%\message{.}%
%  \xdef\SH@lines{\SH@lines\@elt{\the\SH@nline}{\the\SH@posold}{\the\SH@widold}}%
%  \advance\SH@npslines\@ne
%  \SH@widold\SH@widseg \SH@posold\SH@posseg}

\def\SH@getmaxline#1#2#3{\ifnum#1&gt;\SH@nline \SH@nline#1\relax\fi}

\def\SH@nextoctcase{%
  \SH@posseg\AbsVal\SH@lowline\SH@refbase
  \SH@widseg\cutoutsep
  \ifdim\SH@posseg&gt;\SH@posold
     \advance\SH@widseg-\SH@posseg
     \advance\SH@widseg \SH@posold
  \fi
  \xdef\SH@octcase{\SH@octcase \the\SH@widseg \or}%
  \advance\SH@lowline\@ne
  \ifnum\SH@lowline&gt;\SH@highline\else
  \expandafter\SH@nextoctcase \fi}

% Ignore following spaces and \par
\def\SH@ignorepar{\afterassignment\SH@ignorepaR \let\SH@next=}
\def\SH@ignorepaR{%\show\SH@next 
 \edef\SH@nextspec{\noexpand\SH@next}% Hide \outer macros
 \ifx\par\SH@next \let\SH@nextspec\SH@ignorepar \fi
 \expandafter\ifx\space\SH@next \let\SH@nextspec\SH@ignorepar \fi
 \SH@nextspec}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Take a square root of counter \sqrtcount using Newton's method.
% Usage: \sqrtcount=&lt;number&gt; \sqrtofcount; gives square root in \sqrtcount
% To take sqrt of a dimen, do:
%       \sqrtcount=\thedimen \sqrtofcount
%       \multiply\sqrtcount by 256 \thedimen=\sqrtcount sp
% -- see \sqrtofdim
%
% (\@tempcnta and \@tempcntb are used and modified.)
\newcount\sqrtcount
\def\sqrtofcount{\relax\ifnum\sqrtcount&gt;\z@
  \@tempcnta\sqrtcount \sqrtcount\@ne
  \expandafter\squinitial\the\@tempcnta\relax\relax\relax
  \squiterate
\else
  \sqrtcount\@ne 
\fi}
\def\squinitial#1#2{\ifx#1\relax \else
    \ifx #2\relax \multiply\sqrtcount \thr@@ % 3 ~ sqrt(10)
    \else    \multiply\sqrtcount 10
    \fi   \expandafter \squinitial
  \fi}
\def\squiterate{\@tempcntb\@tempcnta \divide\@tempcntb\sqrtcount
   %\message{sqrt(\the\@tempcnta) guess: \the\sqrtcount. }%
   \advance\sqrtcount\@tempcntb \divide\sqrtcount\tw@
   \advance \@tempcntb -\sqrtcount
   \ifnum \AbsVal\@tempcntb&gt;\thr@@ % approximate, use 1 for exact
   \expandafter \squiterate \fi}% expandafter to avoid stack overflows

%  Take sqrt of dimen register, as described above.
\def\sqrtofdim#1{% #1 = dimen register
  \sqrtcount#1\sqrtofcount \multiply\sqrtcount\@cclvi #1=\sqrtcount sp\relax}




% Approximate Fixed Point Division of two dimensions
% 3.14159/2.71828 = 1.15573
% Two parameters: Numerator and denominator.  The answer is returned
% in the numerator (which must be a register).  The denominator is
% unchanged, but it should also be a dimen register. (It may be given 
% as an explicit *integer* string, "123", which is treated as 0.001877
% = 123/65536.)   % \@tempcntb is used and altered.
% 
\ifx\dimexpr\undefined % Use original TeX's integer \divide

  \def\fpdivide#1#2{\let\FPD@nume#1\@tempcntb#2\relax
    \FPD@scale\FPD@scale\FPD@scale\FPD@scale
    \FPD@scale\FPD@scale\FPD@scale\FPD@scale
    \divide#1\@tempcntb}

  % Rescale numbers to preserve accuracy.  The magnum is the level of
  % uncertainty. Use a lower power of 2 for more accuracy (2 is most precise).
  % But if you change it, you must change the repetions of \FPD@scale in
  % \fpdivide above: magic_number^repetitions = 65536 (16^4 = 4^8 = 65536).
  %
  \chardef\FPD@magnum=4
  \newcount\FPD@hi \FPD@hi=\maxdimen \divide\FPD@hi\FPD@magnum

  \def\FPD@scale{%
    \ifnum\AbsVal\FPD@nume&lt;\FPD@hi
      \multiply\FPD@nume\FPD@magnum
    \else
      \divide\@tempcntb\FPD@magnum
    \fi}

\else % Else, use eTeX's \dimexpr

  \def\fpdivide#1#2{\@tempcntb#2\relax
    #1=\dimexpr #1*\p@/\@tempcntb \relax
  }

\fi

% take absolute value of TeX number or dimension (dimen must be a register)
\def\AbsVal#1{\ifnum#1&lt;\z@-\fi#1}

\def\Pointless#1{\expandafter\remove@PT\the#1}
{\catcode`p=12 \catcode`t=12 \gdef\remove@PT#1pt{#1}}

\squarepar % restore catcodes

% ---------------- Pre-defined shapes --------------------
% If you have (computer) memory problems, the following shape
% definitions can be eliminated.

\def\diamondshape{{3}{0}b{3}\\{4}t{0}{6}\\{8}e{3}}
\def\diamondpar#1{\shapepar\diamondshape $\diamondsuit$ {#1} $\diamondsuit$\par}

\def\squareshape{%
  {1}%            centerline at x=1
  {0}b{0}\\%      begin at (0,0)
  {0}t{0}{2}\\%   text at y=0, width=2
  {2}t{0}{2}\\%   text at y=2, width=2
  {2}e{1}%        end at (1,2)
}
\def\squarepar#1{\shapepar{\squareshape}#1\par}

\def\rectangleshape#1#2{% &lt;height&gt; &lt;width&gt;
  {0}% "center" the left edge... sorry, better use \Shapepar
  {0}b{0}\\%
  {0}t{0}{#2}\\%
  {#1}t{0}{#2}\\%
  {#1}e{0}%
}
  
\def\heartshape{%
{20}{0}b{13.32}b{26.68}%
\\{.14}t{10.12}{4.42}t{25.46}{4.42}%
\\{.7}t{9.14}{7.16}t{23.7}{7.16}%
\\{1.4}t{8.4}{9.02}t{22.58}{9.02}%
\\{2.1}t{7.82}{10.42}t{21.76}{10.42}%
\\{2.8}t{7.36}{11.58}t{21.06}{11.58}%
\\{3.5}t{6.98}{12.56}t{20.46}{12.56}%
\\{4.2}t{6.68}{13.32}jt{20}{13.32}%
\\{4.9}t{6.48}{27.04}%
\\{5.6}t{6.34}{27.32}%
\\{6.3}t{6.28}{27.44}%
\\{7}t{6.26}{27.48}%
\\{7.7}t{6.27}{27.46}%
\\{8.4}t{6.32}{27.36}%
\\{9.1}t{6.4}{27.2}%
\\{9.8}t{6.52}{26.96}%
\\{10.5}t{6.68}{26.64}%
\\{11.9}t{7.12}{25.76}%
\\{13.3}t{7.72}{24.56}%
\\{14.7}t{8.51}{22.98}%
\\{16.1}t{9.5}{21}%
\\{17.5}t{10.69}{18.62}%
\\{18.9}t{12.08}{15.84}%
\\{20.3}t{13.7}{12.6}%
\\{21.7}t{15.62}{8.76}%
\\{22.4}t{16.7}{6.6}%
\\{23.1}t{17.87}{4.26}%
\\{24.6}e{20}%
}
\def\heartpar#1{\shapepar{\heartshape}#1\unskip\unskip\penalty-300
\ \ $\heartsuit$\par}

\def\circleshape{%
{0.0}%
{0.0}b{0}\\%
{0.017}t{-0.129}{0.259}\\%
{0.067}t{-0.250}{0.500}\\%
{0.146}t{-0.354}{0.707}\\%
{0.250}t{-0.433}{0.866}\\%
{0.371}t{-0.483}{0.966}\\%
{0.500}t{-0.500}{1.000}\\%
{0.629}t{-0.483}{0.966}\\%
{0.750}t{-0.433}{0.866}\\%
{0.854}t{-0.354}{0.707}\\%
{0.933}t{-0.250}{0.500}\\%
{0.983}t{-0.129}{0.259}\\%
{1.0}e{0}
}
\def\circlepar#1{\Shapepar\circleshape #1\par}

\def\nutshape{%
{0}%
{0}b{0}\\%
{0}t{-12.5}{25}\\%
{11.65}t{-19.23}{19.23}st{0}{19.23}\\%
{11.99}t{-19.42}{16.835}t{2.59}{16.835}\\%
{12.99}t{-20}{15}t{5}{15}\\%
{14.58}t{-20.92}{13.85}t{7.07}{13.85}\\%
{16.65}t{-22.11}{13.45}t{8.66}{13.45}\\%
{19.06}t{-23.51}{13.85}t{9.66}{13.85}\\%
{21.65}t{-25}{15}t{10}{15}\\%
{24.24}t{-23.51}{13.85}t{9.66}{13.85}\\%
{26.65}t{-22.11}{13.45}t{8.66}{13.45}\\%
{28.72}t{-20.92}{13.85}t{7.07}{13.85}\\%
{30.31}t{-20}{15}t{5}{15}\\%
{31.31}t{-19.42}{16.835}t{2.59}{16.835}\\%
{31.65}t{-19.23}{19.23}jt{0}{19.23}\\%
{43.3}t{-12.5}{25}\\%
{43.3}e{0}%
}
\def\nutpar#1{\Shapepar\nutshape #1\par}

% Just the nut shape with the central hole erased:
\def\hexagonshape{%
{0}%
{0}b{0}\\%
{0}t{-12.5}{25}\\%
{21.65}t{-25}{50}\\%
{43.3}t{-12.5}{25}\\%
{43.3}e{0}%
}
\def\hexagonpar#1{\Shapepar\hexagonshape #1\par}

\def\CDlabshape{%
{0}%
{-5.5}b{0}\\%
{-5.3}t{-1.47}{2.94}\\%
{-4.8}t{-2.685}{5.37}\\%
{-3.9}t{-3.878}{7.756}\\%
{-2.8}t{-4.734}{9.468}\\%
{-2.5}t{-4.899}{4.899}st{0}{4.899}\\%
{-2.2}t{-5.04}{3.853}t{1.187}{3.853}\\%
{-1.2}t{-5.376}{3.174}t{2.193}{3.174}\\%
{0}t{-5.5}{3}t{2.5}{3}\\%
{1.2}t{-5.376}{3.174}t{2.193}{3.174}\\%
{2.2}t{-5.04}{3.853}t{1.187}{3.853}\\%
{2.5}t{-4.899}{4.899}jt{0}{4.899}\\%
{2.8}t{-4.734}{9.468}\\%
{3.9}t{-3.878}{7.756}\\%
{4.8}t{-2.685}{5.37}\\%
{5.3}t{-1.47}{2.94}\\%
{5.5}e{0}%
}
\def\CDlabel#1{\Shapepar[1cm]{\CDlabshape}#1\par}

\def\starshape{%
{0}%
{-3}b{0}\\%
{-.927}t{-.674}{1.348}\\%
{-.927}t{-2.853}{5.706}\\%
{.354}t{-1.09}{2.18}\\%
{1.146}t{-1.347}{1.347}st{0}{1.347}\\%
{2.427}e{-1.763}e{1.763}%
}
\def\starpar#1{\shapepar\starshape #1\par}

\endinput

%-------------------------------------------------------------------

       S H A P E P A R . S T Y    --   Short Instructions

\shapepar is a macro to typeset paragraphs of a specified shape.

See shapepar.ltx (or shapepar.pdf etc) for full instructions.

Loading:

plain TeX:  \input shapepar.sty 

LaTeX:  \usepackage{shapepar}

LaTeX package options: [quiet], [noisy]

Usage:

\shapepar [&lt;scale&gt;]{&lt;shape_spec&gt;} Text of the paragraph...

The &lt;scale&gt; is a length (like \unitlength for the picture environment)
used for scaling the &lt;shape_spec&gt; to positions on the page.  When the
&lt;scale&gt; parameter is absent, the scaling is adjusted automatically so 
that the entire shape is filled with text.

\Shapepar (capital S) is just like \shapepar except the paragraph 
is boxed and not centered.

\cutout {&lt;side&gt;} (&lt;hoffset&gt;,&lt;voffset&gt;) \shapepar...as above...

This cuts out a section of the surrounding text to fit the shaped par.
The &lt;side&gt; is l (left) or r (right).  The pair of offsets is optional.

Pre-defined shapes, and commands to use the shape:

\diamondshape, \diamondpar;  \squareshape, \squarepar;  \heartshape, 
\heartpar;  \circleshape, \circlepar;  \nutshape, \nutpar;  \CDlabshape,
\CDlabel;  \starshape, \starpar;  \hexagonshape, \hexagonpar.

Shape generator: 

\rectangleshape{height}{width}

Typeset shapepar.ltx (or see shapepar.pdf) for detailed instructions.


%-----------------------------------------
Version 2.1  (Sep 2006)    Repair \\, fix multibox ordering, \rectangleshape,
                           hexagon.
Version 2.01 (Jun 2006)    Avoid some numeric overflows.
Version 2.00 (Dec 2002)    \cutout, disjoint parts, set scale, much rewrite
Version 1.01 (March 1993)  Small changes from initial release.

%
%  Test integrity of file:
%  brackets: round, square, curly, angle:   () [] {} &lt;&gt;
%  backslash, slash, vertical, at, dollar, and: \ / | @ $ &amp;
%  hat, grave, acute (apostrophe), quote, tilde:   ^ ` ' " ~
</pre></body></html>