# changelog

author: Jan Iven,31-2009,74957,
changelog:
  - write local user list to separate file, see https://enterprise.redhat.com/issue-tracker/beta/?module=issues&action=view&tid=86600&gid=715


author: Jakub Jelinek <jakub@redhat.com> 0.4.0-2.el5
changelog:
  - add support for -c /etc/prelink.conf.d/*.conf in prelink.conf (#249889)
  - remove no longer existent directories from default prelink.conf (#248694)
  - reenabled prelink C++ optimizations which have not triggered any longer
    since _ZT[IV]* moved into .data.rel.ro section from .data
  - fixed performance issues in C++ optimizations, especially on GCJ
    CNI programs (#314051)
  - other performance improvements, prelink -avmR after prelink -ua now
    takes roughly 3m4s real time instead of 20m27s before
  - don't run TEXTREL tests if SELinux is enforcing (#245928)
  - don't leave temporary files behind on prelink --verify failures (#199251)
  - fix adjusting of .debug_ranges if end of range is at the end of some
    section and there is padding before the following one


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-2.1
changelog:
  - blacklist libfreebl3.so and libsoftokn3.so, as nss does some
    FIPS mandated braindamaged integrity checking of these two libraries
    (#245775)


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-1
changelog:
  - DT_GNU_HASH support
  - handle N_BNSYM and N_ENSYM stabs (#198203)
  - handle upgrades from prelink with smaller maxpagesize to prelink
    with larger maxpagesize (#196941)


author: Jakub Jelinek <jakub@redhat.com> 0.3.8-1
changelog:
  - fix -q mode canonicalization fix, speed up filename canonicalization
    by caching canonicalization for directories (#145983, #188062)
  - remove bogus e_shoff assertion check (#194016)
  - move prelink log file to /var/log/prelink/prelink.log (#194473)
  - increase x86-64 maxpagesize to 2MB


author: Jakub Jelinek <jakub@redhat.com> 0.3.7-1
changelog:
  - in -q mode, recheck the canonicalized filename to avoid
    overwriting symlinks with regular files (#145983, #188062)
  - allow prelinking of binaries with .tbss section


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-3
changelog:
  - rebuilt again, disable -Wl,-z,nocopyreloc tests on x86_64,
    nocopyreloc really doesn't work on this platform (#180552)


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-1
changelog:
  - remove kernel requires - installed kernel doesn't imply running
    kernel anyway and in FC5 kernels older than 2.4.20 can't be used
    anyway, as LinuxThreads are no longer included
  - don't relocate stabs N_{B,D,}SLINE (reported by Ashley Pittman)


author: Jakub Jelinek <jakub@redhat.com> 0.3.5-1
changelog:
  - support for ppc32 -msecure-plt libraries and binaries
  - don't crash if d_tag is invalid (#155605)
  - rebuilt against robustified libelf (CAN-2005-1704)
  - fix handling of libraries and binaries given on command
    line without any / characters in the filename


author: Jakub Jelinek <jakub@redhat.com> 0.3.4-1
changelog:
  - fix prelink -uo when linked against libselinux (#146637)
    and when the -o argument filename is on a different filesystem
    than the object that needs undoing


author: Jakub Jelinek <jakub@redhat.com> 0.3.3-1
changelog:
  - if layout code needs to re-prelink some library, make sure
    all libraries that depend on it are re-prelinked too (#140081)
  - add several more checks before deciding it is ok to prelink a binary
    (even if another bug like #140081 was in, these checks should hopefully
    catch it and refuse to (re-)prelink the binary)
  - added new PRELINK_NONRPM_CHECK_INTERVAL variable to /etc/prelink,
    defaulting to 7 days.  Prelink nightly job will not do anything
    if that interval has not elapsed since last prelinking and
    and the rpm database has not been modified since that prelinking.
    This is useful if you rely on rpm/up2date/yum/apt-rpm for library
    and binary updates.  If you combine it with other means (installs
    from source, tarballs etc.), you probably want to
    set PRELINK_NONRPM_CHECK_INTERVAL=0.
  - update prelink man page (#126468)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-10
changelog:
  - support for non-absolute blacklist glob patterns (e.g. -b *.la)
  - cache information about non-prelinkable files (non-ELF, statically linked,
    too small .dynamic, DT_TEXTREL with conflicts against it; #132056)
  - other speedups for prelink -aq
  - for --verify, make sure only read-only fd's are opened for the
    unprelinked temporary file, otherwise a kernel might ETXTBUSY on it
    (#133317)
  - change warning message if some object's dependencies can't be found
  - add buildrequires libselinux-devel and use %{_tmppath} instead
    of /var/tmp in Buildroot (#132879)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-6
changelog:
  - change sed separator in testsuite scripts from | to , if \|
    is present in regexps, as that invokes undefined behaviour
    which changed between GNU sed 4.0.9 and 4.1


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-2
changelog:
  - add 2 new TLS testcases (one that fails e.g. with glibc < 2.3.3-28
    on IA-32)
  - SPARC TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - fix cxx.c:68: find_cxx_sym: Assertive `n < ndeps' failed problem
    on 32-bit architectures (#118522)
  - build prelink.cache into temporary file and atomically rename over
    (#121109)


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-2
changelog:
  - unlink temporary files if renaming to the destination or setting of
    security context failed (#118251)
  - fix bi-architecture prelinking (#118226)
  - if prelink called from the cron script fails, note the exit status
    into /var/log/prelink.log


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-1
changelog:
  - add prelink documentation (PDF format)
  - fix assertion failures on PPC (.sdynbss related, #115925)
  - fix prelink --help (#115202)
  - avoid free on uninitialized variable in one error path (#117332)
  - s/i386/%{ix86}/ to make mharris happy


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-21
changelog:
  - fix prelink abort in certain cases where a new PT_LOAD segment
    needs to be added (seen on AMD64)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-20
changelog:
  - clearify message about unlisted dependencies
  - don't do SELinux context copying if is_selinux_enabled () < 0


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-19
changelog:
  - refuse to prelink objects whose dependencies as reported by
    ldd don't include all dependencies transitively (this can
    happen when using RPATH and a shared library with the same
    SONAME exists both in that RPATH and either another RPATH
    or standard library directories)
  - add testcase for this
  - rework .dynsym/.symtab STT_SECTION translation, so that it works
    with binutils which put only sections not generated by the linker
    into .dynsym for shared libraries
  - fix make check, so that it is not confused by 2.6.x kernel
    VDSOs


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-18
changelog:
  - allow R_*_JU?MP_SLOT relocs to point also into .got.plt
    sections on IA32/AMD64/ARM/s390/s390x/SH


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-15
changelog:
  - blacklist support
  - use FTW_ACTIONRETVAL if available to avoid even stating of
    files in blacklisted directory trees
  - SELinux support


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-12
changelog:
  - added execstack tool
  - added -o option, to be used together with -u
  - free temp_filename in close_dso


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-11
changelog:
  - fix adjustement of DT_VALRNGLO .. DT_VALRNGHI and
    DT_ADDRRNGLO .. DT_ADDRRNGHI dynamic tags when relocating shared
    libraries
  - never adjust p_vaddr/p_paddr/p_offset of PT_GNU_STACK segment
  - allow shell wildcards in /etc/prelink.conf
  - fix REL->RELA conversion of shared libraries if .rel.dyn
    or .rel.plt are last sections in readonly PT_LOAD segment
  - force full reprelinking on prelink upgrades (well, first time
    the cron job is run after the upgrade)
  - require coreutils, findutils, util-linux, gawk and grep


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-8
changelog:
  - use /var/lib/misc/prelink.full instead of /var/run/prelink.full for last
    full prelink timestamp (#106721)
  - warn about UPX compressed binaries or libraries/binaries without section
    headers (neither can be prelinked obviously)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-7
changelog:
  - don't rely on malloc/calloc/realloc with size 0 returning a unique pointer
  - fix testsuite, so that it works even if installed glibc/libstdc++
    is already prelinked


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-5
changelog:
  - fix prelink segfault on -z nocombreloc libraries (#103404)
  - run one make check round with -Wl,-z,nocombreloc to test handling
    of nocombreloc binaries and libraries


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-3
changelog:
  - fix DT_CHECKSUM computation - do STT_LOCAL symbol frobbing and .mdebug
    updates write_dso would do also before checksum computation (#89953)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-2
changelog:
  - avoid assertion failures when changing PROGBITS .bss back into
    NOBITS .bss (#101813)
  - add 2 new tests for it


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-1
changelog:
  - run prelink from cron automatically, add /etc/sysconfig/prelink
    to configure it
  - update manual page


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-2
changelog:
  - fix a thinko in the library path checking code
  - change R_386_GLOB_DAT into R_386_32 in .gnu.conflict, similarly
    R_X86_64_GLOB_DAT and R_X86_64_64
  - fix a bug in find_free_space which caused
    "section file offsets not monotonically increasing" errors on some
    IA-32 binaries
  - add --md5 and --sha options
  - use mmap during --verify if possible
  - add */lib64 directories to prelink.conf


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-1
changelog:
  - make sure binaries prelinked for the second and later time without
    unprelinking in between verify correctly
  - make sure DT_CHECKSUM computation is the same for newly prelinked
    and second or later time prelinked libraries
  - dwarf2 abbrev hash bugfix
  - don't allow prelinking libraries outside directories specified
    in config file or on the command line
  - several new tests for reprelinking
  - pack non-alloced sections and section header table tightly after the
    last alloced section


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-28
changelog:
  - finish and enable ppc64
  - fix ppc BR{,N}TAKEN reloc handling
  - fix up sh_offset values of zero-sized or SHT_NOBITS section
    if ld messed them up
  - issue error about bogus library dependency chains instead of
    segfaulting (plus testcases for it)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-27
changelog:
  - add --quick mode
  - new test for --quick mode and also reprelinking of binary against
    upgraded shared library which needs more conflicts


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-26
changelog:
  - don't segfault in C++ optimizations if a conflict from undefined
    to defined value is seen
  - some more ppc64 work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-25
changelog:
  - exec-shield support
  - with -R, don't randomize just base address from which all libs
    are layed out, but also slightly randomize order of libraries
    in the layout queue
  - add check-harder and check-cycle makefile goals in testsuite/,
    use it during rpm building


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-24
changelog:
  - optimize out conflicts in G++ 3+ virtual tables if they are just
    because some method has been called from a binary and thus there
    is a .plt slot in the binary. This change not only kills lots of conflicts
    on some KDE programs, but also should speed up runtime (not just startup
    time), since the hop through .plt is bypassed
  - added new C++ test
  - fix a bug in ppc64 fixup .plt code


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-23
changelog:
  - when updating dynamic tags for executable after section reshuffling,
    check section type as well, so that 0 sized sections don't get the
    tags attached instead of the proper ones
  - when an address space conflict is found between libraries for the same
    executable during layouting, check properly for all remaining conflicts
    as well


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-22
changelog:
  - don't adjust DT_REL{,A} if it is 0
  - allow prelinking of libraries with no dependencies
  - fix handling of libraries with no lazy relocs, no normal relocs or no
    relocs at all
  - some new tests
  - fix SH (Daniel Jacobowitz)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-20
changelog:
  - ppc TLS
  - some ppc64 work
  - avoid using trampolines for nested functions
  - fix typo in prelink man page (#89247)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-18
changelog:
  - fix section indices in .symtab if non-alloced sections weren't
    originally monotonically increasing
  - s390, s390x and Alpha TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-13
changelog:
  - use ELF_F_PERMISSIVE if defined
  - be permissive even when doing --reloc-only
  - fix up .plt section sh_entsize on Alpha


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-11
changelog:
  - make it work with elfutils instead of libelf 0.[78]
  - update to newer auto*/libtool
  - some more steps towards TLS support, at least --reloc-only should work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-9
changelog:
  - enable on ppc and x86_64
  - fix ppc far PLT slot prelink
  - support --undo on ppc
  - for bug-compatibility with some unnamed OS changed R_SPARC_RELATIVE
    --undo
  - tiny steps towards TLS support on IA-32, more will come


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-8
changelog:
  - avoid putting garbage into executable's .gnu.liblist sh_link
    if we did not have to grow .dynstr
  - don't segfault on bogus sh_link and sh_info values (#72705)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-7
changelog:
  - when growing allocated shared lib sections (for REL->RELA
    conversion), make sure !PF_W and PF_W segments don't end up
    on the same page
  - when finding space for sections in an executable, make sure
    it is not included in between two reloc sections
  - for non-zero SHN_ABS symbols on 32-bit arches mask high
    32-bits of st_value (libelf 0.8.x is strict here)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-1
changelog:
  - added --undo and --verify mode
  - new architectures s390, s390x, arm, sh
  - handle binaries/shared libraries with non-allocated sections
    without monotonically increasing sh_offsets
  - handle .sbss and .sdynbss
  - fixed a bug in 64-bit LE/BE read routines
  - removed .rel{,a}.dyn reloc conversion/sorting, it was duplicating
    ld's -z combreloc and complicated lots of things
  - fixed STB_LOCAL/STT_SECTION symbol adjusting
  - use mkstemp for temporary files, allow --verify for binaries/libs
    on read-only filesystems
  - added DWARF-2 .debug_ranges adjustement, special case GCC's
    "set base to 0 and make things absolute instead of relative" trick
  - allow arches to override default layout mechanism (for ppc)
  - added some new tests, test --undo and --verify modes in the testsuite
  - alpha: adjust what R_ALPHA_GLOB_DAT points to too
  - i386: apply _32 and _PC32 REL relocs, as apply_rel can be called
    for C++ optimizations before REL->RELA conversion
  - ppc: layout strategy to satisfy ppc lib location preferences
  - sparc64: handle R_SPARC_DISP64
  - x86-64: adjust what R_X86_64_RELATIVE points to too
  - link prelink statically, esp. because of --verify mode
  - run make check during build process


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-7
changelog:
  - fix layout code so that -R works
  - on IA-32, when there are no R_386_PC32 relocs and no R_386_32 relocs
    with non-zero addend (= memory content), don't convert REL->RELA,
    only switch R_386_32 relocs to R_386_GLOB_DAT
  - support creating a new PT_LOAD segment if necessary, if SHT_NOBITS
    sections are small, instead of adding new PT_LOAD segment just add file
    backing to those NOBITS sections
  - added testsuite
  - new supported architectures (Alpha including .mdebug section support,
    Sparc, Sparc 64-bit, X86_64 (the last one untested)), beginning of PPC
    support


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-5
changelog:
  - fix sorting of .rel*.dyn sections, so that all RELATIVE relocs really
    come first
  - when DT_RELCOUNT already exists and conversion REL->RELA is done,
    convert it into DT_RELACOUNT
  - set conflict lookupent and conflictent to 0 for undefineds
  - don't bother with DT_REL*COUNT for apps, they cannot have any RELATIVE
    relocs


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-4
changelog:
  - brown paper bag time: when determining if conversion from REL to RELA
    is needed, check all non-PLT rel sections, including last.
    This caused prelinking to fail with -z combreloc compiled libraries.


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-3
changelog:
  - don't use .gnu.reloc section, use .rel.dyn or .rela.dyn instead
  - put RELATIVE relocs first, not last, so that DT_REL{,A}COUNT
    works
  - put in updated glibc patch
  - no need for special binutils patch - all is done in the -z combreloc
    patchset


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-2
changelog:
  - use the new DT_GNU_CONFLICT/DT_GNU_LIBLIST/SHT_GNU_LIBLIST constants
  - unlink *.#prelink# files if necessary


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-1
changelog:
  - fix layout.c
  - create .gnu.prelink_undo section, --undo and --verify modes will use that
  - some more C++ specific optimizations


author: Jakub Jelinek <jakub@redhat.com> 0.1.2-1
changelog:
  - bail out early if ELF object does not have sh_offsets
    monotonically increasing
  - disallow prelinking if there are conflicts against read-only
    segments in shared libraries (ie. non-pic shared libraries
    - this is better than bailing out for all non-pic shared libraries)
  - add some C++ specific optimizations to reduce number of conflicts,
    more to come


author: Jakub Jelinek <jakub@redhat.com> 0.1.1-1
changelog:
  - relocate stabs and dwarf-2 debugging formats
  - support both --all and incremental prelinking
  - handle hardlinks
  - limit to libraries in /etc/prelink.conf directories or
    directories from command line


author: Anton Arapov <anton@redhat.com>
changelog:
  - Fix the paths to microcode (Petr Holasek )
  - Update microcode data file to 20111110 revision.
  - Resolves: #760323


author: Anton Arapov <anton@redhat.com>
changelog:
  - Fix memory leak (Kamil Dudka )
  - Update microcode data file to 20110428 revision.
  - Resolves: #690414, #713653


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Spec cleanup and macro standardization.
  - Update microcode data file to 20080131 revision.
  - Resolves: #431566.


author: Jon Masters <jcm@redhat.com>
changelog:
  - Update to microcode 1.15 for real this time (now kernel patch is in and we
    - both RH and Intel - think this should be ok to go now).
  - Resolves: #214807, #209455.


author: Dave Jones <davej@redhat.com>
changelog:
  - Drop the node creation/deletion change from previous release.
    It'll cause grief with selinux, and was a hack to get around
    a udev shortcoming that should be fixed properly.


author: Dave Jones <davej@redhat.com>
changelog:
  - Create/remove the /dev/cpu/microcode dev node as needed.
  - Use correct path again for the microcode.dat.
  - Remove some no longer needed tests in the init script.


author: Dave Jones <davej@redhat.com>
changelog:
  - Only enable microcode_ctl service if the CPU is capable.
  - Prevent microcode_ctl getting restarted multiple times on initlevel change (#141581)
  - Make restart/reload work properly
  - Do nothing if not started by root.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - Allow rpms without a tetex dependency. That allows using sgml things
    for online things without installing the heavy tetex.


author: Tim Waugh <twaugh@redhat.com> 0.9.15-1
changelog:
  - 0.9.15; incorporates most of the libdir patch.
  - The fixsgml2latex patch is no longer required.
  - Installed documentation now works.
  - Don't ship backup files.
  - Put the LaTeX style files in the texmf directory tree.
  - Requires: gawk, groff.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - changed default papersize to letter (from a4...sorry Europeans :-)
    use --papersize=a4 on any sgml2* command to change it or remove the
    patch from this spec file and rebuild.


author: Mike A. Harris <mharris@redhat.com> 1.0.2-3
changelog:
  - Added xsm documentation to doc macro.
  - The 1.0.2-1 build had the version accidentally bumped to 1.0.2 before
    an xsm-1.0.2 was available, so I had to hard code the actual 1.0.1 version
    in a few places temporarily until xsm-1.0.2 is available.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-4
changelog:
  - Add "Requires(pre): xorg-x11-filesystem >= 0.99.2-3" to avoid bug (#173384).
  - Added rstart-0.99.1-rstart-installation-location-fixes.patch and
    xsm-0.99.2-xsm-installation-location-fixes.patch to put config files in
   /etc and data files in /usr/share where they belong.
  - Added "Requires: xauth, rsh" as rstart invokes xauth, rsh.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - Added "Obsoletes: XFree86, xorg-x11", as all of these used to be in there.
  - Rebuild against new libXaw 0.99.2-2, which has fixed DT_SONAME. (#173027)


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Added "Requires: xorg-x11-proto-devel" to devel for xinerama.pc
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXinerama to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Alexander Larsson <alexl@redhat.com> 1.1.5-1
changelog:
  - 1.1.5
  - Removed hidden patch. Why should gnome not be visible?
    Its not like you don't see all the kde themes from Gnome, and
    they don't work well in Gnome.


author: Than Ngo <than@redhat.com> 1.0.0-4
changelog:
  - remove kde hicolor patch, it's not required anymore
  - add patch to make gnome icon theme hidden in KDE


author: James Antill <james.antill@redhat.com> - 1.1.2-3
changelog:
  - Turn off updates for XML to .sqlite conversion.
  - Resolves: rhbz#491916
  - Resolves: 490516
  - Resolves: 494006


author: Eric Sandeen <sandeen@redhat.com> - 1.0.0-6
changelog:
  - blkiomon doesn't recognize --msg-queue-name (#498377)
  - Unrecognized blkparse options in manpage (#498381)
  - blktrawverify manpage inconsistencies (#498383)
  - btrecord doesn't recognize --max-pkts (#498426)
  - btrace manpage errors (#498891)
  - Misc. manpage typos and errors (#498904)
  - btrace does not recognize -b and -n options (#498945)
  - blkiomon unaligned access messages on ia64 (#499373)
  - blkrawverify exits without error when no files exist (#499581)
  - blkparse exits without error when no files exist (#500118)


author: Eric Sandeen <sandeen@redhat.com> - 1.0.0-3
changelog:
  - Add fix for min-counter initialization and BLK_TA_ABORT (#475548)
  - Add fix for bad trace magic from unlocked reader threads (#493385)


author: Igor Foox <ifoox@redhat.com> - 2.12.0-5
changelog:
  - Imported released 2.12.0 sources from upstream.
  - Changed optional installation prefix to /opt/frysk from /opt.
  - Changed build depenedency on libgtk-java and libgnome-java to -devel.


author: Dan Walsh <dwalsh@redhat.com> 0.2.11-1
changelog:
  - Jump to latest in rawhide
    - Eliminate memory leaks
    - More fixes from Jim Meyering
    - More error checking on failed strdup
    - Start mcstrans before netlabel
    - Fix error handling
  Resolves: #457179


author: Steve Conklin <sconklin@redhat.com> - 0.2.7-1
changelog:
  - Fixed a translation error
  - Folded the init script patch into the source tarball.
  - Fixed a memory leak I found
  Resolves: #339951


author: Dan Walsh <dwalsh@redhat.com> 0.1.4-1
changelog:
  - Add patch from sgrubb
  - 	Fix 64 bit size problems
  - 	Increase the open file limit
  -	Make sure maximum size is not exceeded


author: Peng Wu <pwu@redhat.com> - 0.4.5-10.el5
changelog:
  - Resolves: rhbz#723204: scim-bridge segfaults when closing a dialog
    Add patch scim-bridge-0.4.5-fixes-null-imengine.patch


author: Jens Petersen <petersen@redhat.com> - 0.4.5-7.el5
changelog:
  - add scim-bridge-0.4.5-shutdown-with-X-211260.patch backported from cvs
    to fix agent lingering after desktop sessions (#211260)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-6.el5
changelog:
  - backport scim-bridge-0.4.6-compiz-focus-214149.patch to fix problem with
    preedit getting committed immediately (#214149)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-4.el5
changelog:
  - add scim-bridge-0.4.5-many-client-events-209573.patch from cvs to stop
    crash with long scim-chewing input (Ryo Dairiki, #211262)
  - add scim-bridge-0.4.5-preedit-underline-attribute-208921.patch from cvs to
    avoid underlining of Hangul in preedit (Ryo Dairiki, #211261)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-3
changelog:
  - add scim-bridge-0.4.5-key-event-order-206261.patch from cvs to fix modifiers
    problem with scim-sinhala (Ryo Dairiki, #206261)
  - make im module subpackages require scim-bridge = ver-rel instead of
    /usr/bin/scim-bridge (#207872)


author: Jens Petersen <petersen@redhat.com> - 0.4.2-1
changelog:
  - update to 0.4.2 release (fixes #204657, #204337)
  - rename gtkimm and qtimm subpackages to gtk and qt respectively
  - move gtkimm xinput.d script to gtk subpackage
  - add qtimm xinput.d script to qt subpackage
  - require scim >= 1.4.4-33.fc6


author: Jens Petersen <petersen@redhat.com> - 0.3.1-1
changelog:
  - update to 0.3.1 release
  - buildrequire qt-devel
  - disable building oxygen source documentation for now
  - include html docs


author: Jens Petersen <petersen@redhat.com> - 0.2.3-2
changelog:
  - update with fixes from cvs (#197719)
  - fix input state caching across desktop sessions (Ryo Dairiki, #197775)


author: Jens Petersen <petersen@redhat.com> - 0.2.0-1.1
changelog:
  - update to 0.2.0
  - add scim-bridge-0.2.0-agent-fixes.patch from cvs to fix trigger event
    handling and config reload problems (Ryo Dairiki)


author: Mike A. Harris <mharris@redhat.com> 1.0.1.2-1
changelog:
  - Updated xorg-x11-drv-digitaledge to version 1.0.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for digitaledge input driver generated automatically
    by my xorg-driverspecgen script.


author: Miloslav Trmac <mitr@redhat.com> 2.2-24
changelog:
  - Don't just delete the original file when destination and current directory
    are on different filesystems


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-14
changelog:
  - Fix up the mkstemp patch, don't segfault with lacking write permissions
    (#57700)
  - Fix up man page (part 2 of #57700)
  - Fix compiler warnings


author: Tim Powers <timp@redhat.com>
changelog:
  - minor spec file cleanups
  - built for 7.1
  - use predefined RPM macros whenever possible
  - use RPM_OPT_FLAGS when building


author: Peter Soos <sp@osb.hu>
changelog:
  - Added Hungarian "Summary:" and "%description" 
  - Corrected the file and directory attributes to rebuild the package 
    under RedHat Linux 6.0


author: Arkadiusz Mikkkkkkiewicz <misiek@misiek.eu.org>
changelog:
  - Recompiled under RedHat Linux 5.1 
  - Small changes in %build
  LANG=C
  export LANG
  unset DISPLAY
   and %files 
  - Added "Vendor:" 
  - Added Polish "Summary:" and "%description"


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Added "BuildRequires: pkgconfig" for (#193508)
  - Replace "makeinstall" with "make install DESTDIR=..." for (#192729)
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXxf86misc to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Updated libXxf86misc to version 0.99.1 from X11R7 RC1
  - Updated file manifest to find manpages in "man3x"


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-joystick to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for joystick input driver generated automatically
    by my xorg-driverspecgen script.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - do not check with "id" if running as root (/usr/bin/id)
  - link statically against -lwrap (from /usr/lib)


author: Daniel J Walsh <dwalsh@redhat.com> 4.0-50
changelog:
  - Change spec file to stop building auxilliary files
  - Fix Makefile to build correctly on x86-64
  - Fix strerror.c to build correctly on x86-64


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix manpage (#13218)
  - gettextize 
  - exit if /etc/sysconfig/network doesn't exist
    and make sure it works when networking is off (#23757)


author: Philipp Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed a build warning for daemon.c (missing <stdlib.h> include)
  - Portmap now running under user rpc if possible (#12427)


author: Than Ngo <than@redhat.de>
changelog:
  - /etc/rc.d/init.d -> /etc/init.d
  - condrestart in %postun
  - fix initscript
  - add requires initscript
  - remove links from packaging


author: Erik Troan <ewt@redhat.com>
changelog:
  - added restart, status commands to init script
  - added chkconfig support
  - uses a buildroot and %attr tags


author: Radek Novacek <rnovacek@redhat.com> 0.5-4
changelog:
  - Make password for ESX not mandatory
  - Assume using https protocol when not given on ESX
  - Resolves: rhbz#772612, rhbz#772379


author: Radek Novacek <rnovacek@redhat.com> 0.5-3
changelog:
  - Fix logging exceptions
  - Fix using undefined variable
  - Don't report Domain-0 as guest
  - Resolves: rhbz#768112, rhbz#769170


author: Radek Novacek <rnovacek@redhat.com> 0.5-1
changelog:
  - Upstream version 0.5
  - vSphere support
  - Don't print logs to stderr when not in debug mode
  - Add workaround for xen for adding guests
  - Fix exporting variables from /etc/sysconfig in initscript
  - Resolves: rhbz#759631, rhbz#765728, rhbz#761569, rhbz#756380


author: Radek Novacek <rnovacek@redhat.com> 0.4-1
changelog:
  - Upstream version 0.4
  - Make main loop more robust
  - Workaround for removing machines using xen
  - Add vdsm mode
  - Resolves: rhbz#756380, rhbz#757974, rhbz#754330


author: Radek Novacek <rnovacek@redhat.com> 0.3-3
changelog:
  - Use updateConsumer API instead of updateConsumerFact (fixes limit 255 chars of uuid list)
  - Requires python-rhsm >= 0.96.13
  - Resolves: rhbz#749514


author: Petr Sabata <contyk@redhat.com> - 2.6.18-13
changelog:
  - Correct lnstat usage (dump, keys)
  - Resolves: rhbz#645264
  - Correct arpd usage (various missing options), based on Petr Lautrbach's patch
    for bug 592266
  - Resolves: rhbz#645260
  - Correct ss usage (query, diag)
  - Resolves: rhbz#645267


author: Marcela Mašláňová <mmaslano@redhat.com> - 2.6.18-10
changelog:
  - “ip maddr show” on an infiniband address causes a stack corruption 
   because the length of the address for Infiniband
  - Resolves: rhbz#472878


author: Marcela Maslanova <mmaslano@redhat.com> - 2.6.18-8
changelog:
  - change ss.c - use standart library
  - fix segfault - only hexadecimal keys are possible values for xfrm
  - support for TCP_RTO_MIN
  - update of man ip - xfrm details
  - IPv6 Default Address Selection - User Configurable Policy Table
  - Resolves: rhbz#446198, rhbz#449933, rhbz#358351, rhbz#431011, rhbz#439524


author: Marcela Maslanova <mmaslano@redhat.com> - 2.6.18-7
changelog:
  - [iPv6DoD] fix RFC 4309 Using AES CCM Mode with IPsec ESP
  - change xfrm.h header according to ibm patch
  - Resolves: #441384


author: Radek Vokal <rvokal@redhat.com> - 2.6.18-1
changelog:
  - upgrade to upstream 2.6.18
  - initcwnd patch merged
  - bug fix for xfrm monitor
  - alignment fixes for cris
  - documentation corrections


author: Phil Knirsch <pknirsch@redhat.com> 2.4.7-14
changelog:
  - Fixed -f option for ss (#118355).
  - Small description fix (#110997).
  - Added initialization of some vars (#74961). 
  - Added patch to initialize "default" rule as well (#60693).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Updated to latest version. Used by other distros, so seems stable. ;-)
  - Quite a few patches needed updating in that turn.
  - Added ss (#107363) and several other new nifty tools.


author: Phil Knirsch <pknirsch@redhat.com> 2.4.7-3
changelog:
  - Fixed missing diffserv and atm support in config (#57278).
  - Fixed inconsistent numeric base problem for command line (#65473).


author: Helge Deller <hdeller@redhat.de>
changelog:
  - updated to iproute2-2.2.4-now-ss001007.tar.gz 
  - bzip2 source tar file
  - "License" replaces "Copyright"
  - added "BuildPrereq: tetex-latex tetex-dvips psutils"
  - rebuilt for 7.2


author: Petr Lautrbach <plautrba@redhat.com> 8.45.39-1
changelog:
  - suppress remove error message during boot (#679998)
  - fix logic error with removing arp_ip_target (#745681)


author: Harald Hoyer <harald@redhat.com> 8.45.36-1
changelog:
  - add net_log
  Resolves: rhbz#507515
  - do not umount mount points with nfs in the path
  Resolves: rhbz#703203
  - remove /var/run/subsys/rhsm on startup
  Resolves: rhbz#705236


author: Harald Hoyer <harald@redhat.com> 8.45.35-1
changelog:
  - fix VLAN configs with non-numeric interface names
  Resolves: rhbz#462095
  - do not ignore IPv6 aliases
  Resolves: rhbz#612877
  - support vlan tag 0
  Resolves: rhbz#624704
  - clarify comment of checkpid()
  Resolves: rhbz#637176
  - specify DEVICETYPE for InfiniBand
  Resolves: rhbz#648524
  - fix grep in lang.csh
  Resolves: rhbz#649995
  - support "#" in interface names
  Resolves: rhbz#664091
  - fixed sysctl calls fail with VLANs
  Resolves: rhbz#665601
  - fixed loop for switched MACs
  Resolves: rhbz#669728
  - fixed dmraid output parsing
  Resolves: rhbz#671386
  - fixed MASTER in double quotes
  Resolves: rhbz#674221
  - don't do force/lazy umount for the first nfs umount
  Resolves: rhbz#676851 rhbz#687890
  - fixed DHCPv6 if no IPv4 address configured
  Resolves: rhbz#684909
  - disable link checking when PERSISTENT_DHCLIENT is set
  Resolves: rhbz#685038
  - no more noisy output for iscsid check during shutdown or reboot
  Resolves: rhbz#687849
  - clarified mount option in netfs
  Resolves: rhbz#689898


author: Harald Hoyer <harald@redhat.com> 8.45.34-1
changelog:
  - if $LANG is set, don't override it
  Resolves: rhbz#692893
  - fix arp_ip_target for ifup/ifdown
  Resolves: rhbz#604669
  - add udev rules for OSX Devices (1731/2)
  Resolves: rhbz#653621


author: Harald Hoyer <harald@redhat.com> 8.45.31-1
changelog:
  - do not killall racoon with the full path
  Resolves: rhbz#567295
  - fixed the interactive startup keys in translation
  Resolves: rhbz#566579
  - do not clear the environment for daemon()
  Resolves: rhbz#564093
  - call unicode_start with $UNIMAP instead of $SYSFONTACM
  Resolves: rhbz#557089
  - fixed the network interface name grep in checks
  Resolves: rhbz#538863
  - make /var/lib/xend a bind mount for read-only root systems
  Resolves: rhbz#526046
  - do not try to activate individual dmraid subsets
  Resolves: rhbz#524356
  - create /var/run/utmp* /var/log/wtmp* with the correct selinux context
  Resolves: rhbz#519748
  - load the bonding driver, if bonding options are present in the ifcfg file
  Resolves: rhbz#516569
  - run quotacheck after the local filesystems have been mounted
  Resolves: rhbz#499207
  - add DHCP_HOSTNAME documentation to sysconfig.txt
  Resolves: rhbz#498052
  - remove /var/run/dovecot/* also (not only /var/run/dovecot/*/*)
  Resolves: rhbz#492994


author: Harald Hoyer <harald@redhat.com> 8.45.30-2
changelog:
  - fix raw path in initscript (#472891)
  - remove deprecation comments (#472891)
  - applied missing ipcalc patch for IPv6 address validation (#464268)
  - Resolves: rhbz#472891 rhbz#464268


author: Phil Knirsch <pknirsch@redhat.com> 8.45.29-3
changelog:
  - Final fixes for IP address validation (#464268)
  - Added required 54-cu3088-fix.rules udev rules file (#475721)
  - Resolves: #464268,#475721


author: Harald Hoyer <harald@redhat.com> 8.45.28-1
changelog:
  - fixed "Determine reboot/halt via existing INIT_HALT environment variable. (#475006)
  - Resolves: rhbz#475006


author: Harald Hoyer <harald@redhat.com> 8.45.26-1
changelog:
  - add md activation before lvm/device-mapper in netfs (#480627)
  - fixed SUBCHANNEL grep for s390
  - Move the bridge member handling later in the ifdown sequence (#463325, Sean E. Millichamp <sean@bruenor.org>)
  - Allow changing of VLAN type even if the module is already loaded. (#495053, <pietro@bertera.it>)
  - add gfs2 to rc.sysinit mount (#494963)
  - support ETHTOOL_OPTS on bridge devices (#493255, <bbaetz@acm.org>)
  - Add vlan support for s390 HSI interfaces. (#490584)
  - Don't re-init an existing device, it causes errors. (#484411, <jpayne@redhat.com>)
  - Remove arp_ip_target on ifdown for bonding devices. (#483711)
  - Don't unmount the nfsd filesystem when unmounting nfs client mounts. (#481794, <sprabhu@redhat.com>)
  - Bring up ipsec interfaces last. (#481733)
  - Break deadlock by explicitly handling alias for CTC and IUCV (#475721)
  - Determine reboot/halt via existing INIT_HALT environment variable. (#475006)
  - Add some docs on BONDING_OPTS. (#472480)
  - Don't say that we're shutting off crypto if we aren't actually doing it. (#471944)
  - remove empty bridges (#463325)
  - Add a address check capability for IPv4 and IPv6 addresses. (#464268)
  - fail if HWADDR specified in ifcfg is not present in the system (#487718)
  - fix ifdown of vlan iface which is a bridge member (#481557)
  - add proper return codes for /etc/init.d/network (#481002)
  - fixed brigde setup (bug #463014)
  - Add an option for consoletype to always return 0. (#453798, <notting@redhat.com>)
  - Use the pidfile before running pidof in status(). (#440658)
  - Allow passing of arguments to dhcp6c (#437949, <pekkas@netcore.fi>)
  - Remove /.suspended as well on boot (#270861)
  - Allow use of either ESP only or AH only (#251494, <stijn.tintel@x-tend.be>)
  - Resolves: rhbz#251494,rhbz#270861,rhbz#437949,rhbz#440658,rhbz#453798,
              rhbz#463014,rhbz#463325,rhbz#464268,rhbz#471944,rhbz#472480,
              rhbz#475006,rhbz#475721,rhbz#475770,rhbz#480627,rhbz#481002,
              rhbz#481557,rhbz#481733,rhbz#481794,rhbz#483711,rhbz#484411,
              rhbz#487718,rhbz#490584,rhbz#493255,rhbz#494963,rhbz#495053


author: Harald Hoyer <harald@redhat.com> 8.45.22-1
changelog:
  - refined SUBCHANNEL grep statement (bug #459044)
  - blkid has a -l option to pick a single device. Use it. (#470027)
  - don't mkswap on halt (#469823)
  - fixed bonding arp_ip_target handling (#467954) (Darcy Sherwood)
  - Resolves: rhbz#459044, rhbz#470027, rhbz#469823, rhbz#467954


author: Harald Hoyer <harald@redhat.com> 8.45.20-1
changelog:
  - changes to init scripts to better support stateless (#433702, <ahecox@redhat.com>)
  - call logger with full path (#447928, Mihai Vintila)
  - add a udevsettle before mounting _netdev devices (#452866, <bmr@redhat.com>)
  - reduce device initialization overhead for ccw devices (#437110, Glen Johnson)
  - Resolves: rhbz#433702 rhbz#452866 rhbz#447928 rhbz#437110


author: Bill Nottingham <notting@redhat.com> 8.45.19.EL-1
changelog:
  - also skip network shutdown if there is a '_rnetdev' root device (part of #435358, <pjones@redhat.com>)


author: Bill Nottingham <notting@redhat.com>, Harald Hoyer <harald@redhat.com> 8.45.18.EL-1
changelog:
  - IKE_DHGROUP is now an option for IPsec configuration files, which allows
  to set the dh group used during PHASE 1 of IPsec SA (#251506)
  - arp_ip_target can now be used with a comma seperated IP list in BONDING_OPTS (#288151)
  - genhostid now generates only 32 bit hostids on 64 bit systems (#306811)
  - the check for the need of remounting the root file system read-writable
  is now refined (#334171)
  - quoted SUBCHANNELS and HWADDR options in network configuration files are
  now handled properly (#351291)
  - support for resuming from an encrypted swap has been added (#360071)
  - rc.sysinit now executes the proper configuration tools, if /.unconfigured
  is present (#426372)
  - Resolves: rhbz#251506 rhbz#288151 rhbz#306811 rhbz#334171 rhbz#351291 rhbz#360071 rhbz#426372


author: Bill Nottingham <notting@redhat.com> 8.45.16.EL-1
changelog:
  - init.d/network: add support for VLAN_PLUS_VID_NO_PAD vlans (#229285)
  - network-functions: fix logic error in install_bonding_driver (#229643)
  - add init script for netconsole (#223742)
  - ifup-eth: set 'primary' later for bonding devices (#236897, <agospoda@redhat.com>)
  - init.d/halt: don't shut down the network in kexec (#223932, <mchristi@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.45.10.EL-1
changelog:
  - add a step to rename any temporarily renamed devices (#208740, #204803, #214817)
  - rc.sysinit: fix reversed dmraid test (#216490)
  - translation updates (#216097)
  - don't automatically reload modules on module reomvals (#211474)
  - don't unmount network file systems (#217625)


author: Bill Nottingham <notting@redhat.com> 8.45.7.EL-1
changelog:
  - fix gdm in CJKI (#209579, #213196)
  - rename_device: correctly ignore backup interface files
  - mount tmpfs with -n (#213132)


author: Bill Nottingham <notting@redhat.com> 8.45.5.EL-1
changelog:
  - fix handling of undisplayable locales on the console some more (#209579, #212438)
  - use SUBCHANNEL as the primary identifier for s390 networking (#204803)


author: Bill Nottingham <notting@redhat.com> 8.45.4.EL-1
changelog:
  - don't set CJKI as the language on virtual consoles (#209579)
  - use dmraid.static in rc.sysinit (#211297)
  - use sysfs interface for bonding, so multiple bonds work again (#202443, <agospoda@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.45.3.EL-1
changelog:
  - remove early-login code
  - Handle "nodmraid" and "nompath" command line options (#209377, <pjones@redhat.com>)
  - translation updates: da, fi, zh_CN, ja, ml, ms
  - restorecon on moved dhclient lease file (#209853)
  - set different limits for shmmax, etc. based on arch (#184820)


author: Bill Nottingham <notting@redhat.com> 8.45-1
changelog:
  - lang.csh/lang.sh - do *not* stty iutf8; too much chaos with SIGTTOU
    (reverts: #186961; fixes #209469)
  - translation updates: ms


author: Bill Nottingham <notting@redhat.com> 8.44-1
changelog:
  - separate tmpfs-usage for state from readonly-root
  - set keymap correctly in non-utf8 locale (#167363)
  - setsysfont: run unicode_stop if in non-unicode locale
  - lang.csh/lang.sh: set iutf8 if appropriate (#186961)
  - lang.csh/lang.sh: handle non-utf8 locales correctly (#200100)
  - rc.sysinit: redirect stderr from setsysfont (#209204, indirectly)
  - rwtab: fix iscsi file location (#208864)
  - translation updates: el, da, as, or
  - fix stateless updates (#206331, <law@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.43-1
changelog:
  - move ccwgroup initialization to a udev rule (should fix #199139,
    - init.d/functions: don't write to gdmfifo
  - remove unused-since-RHL-7 consolechars code, update docs (#206106)
  - stateless updates (#206331, <law@redhat.com>)
  - translation updates (el, ms, hr, sl)


author: Bill Nottingham <notting@redhat.com> 8.42-1
changelog:
  - run rc.sysinit, /etc/rc in monitor mode (part of #184340)
  - use a better check for 'native' services (#190989, #110761, adapted
    from <matthias@rpmforge.net>)


author: Bill Nottingham <notting@redhat.com> 8.41-1
changelog:
  - fix network ipv6 hang (#207137, others)
  - rc.sysinit: change blkid.tab path to /etc/blkid/blkid.tab
  - rename_device: reset DEVPATH also when renaming (#206884, <phil@fifi.org>)
  - sysconfig.txt: clarify onboot/onparent usage


author: Bill Nottingham <notting@redhat.com> 8.40-1
changelog:
  - translation updates
  - rename_device: use '__tmpXXXX' instead of 'devXXXX' as a temporary device
    name to avoid any realistic namespace clashes
  - rc.sysinit: set default affinity if specified on commandline (#203359)
  - always pass path to '.' (#206035)
  - run setsysfont, loadkeys always when /dev/tty{0,1} exist (#150769)
  - allow going to a shell when system is shut down cleanly (from <dwalsh@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.39-1
changelog:
  - translation updates
  - Handle partitions on multipath/dmraid better (<pjones@redhat.com>)
  - make /dev/mapper/control ourselves (<pjones@redhat.com>)
  - init.d/network: simplify 'status' call
  - fix actual 169.254 networks (#203591)
  - rc.sysinit: don't run vgscan (#191879)
  - init.d/halt: don't umount /dev/root<foo> (<oblin@mandriva.com>)
  - rc.sysinit: catch more dmraid errors (#200683)
  - support 'tmp' option in /etc/crypttab (#201382, <mitr@redhat.com>,
    <lv@lekv.de>)
  - IPv6 updates (<pb@bieringer.de>, includes a fix for #143452)


author: Bill Nottingham <notting@redhat.com> 8.38-1
changelog:
  - translation updates
  - bring down bonding slaves on ifdown (#199706)
  - support LINKDELAY for dhcp (#191137)
  - netfs: run multipath on netdev devices (#180977)
  - halt: use /proc/mounts instead of /etc/mtab (#198426, <mitr@redhat.com>)
  - rc.sysinit: fix getkey race (#191453, <mitr@redhat.com>)
  - spec cleanups (#188614, <kloczek@rudy.mif.pg.gda.pl>)
  - support aliases on vlan (#193133, <mitr@redhat.com>)
  - clean up ifcfg file handling (<mitr@redhat.com>, <michal@harddata.com>)
  - GRE and IPIP tunnel support (#168990, <mitr@redhat.com>,
    <razvan.vilt@linux360.ro>, <aaron.hope@unh.edu>, <sean@enertronllc.com>)
  - rc.sysinit: don't format encrypted swap always (#127378)
  - don't try to add routes to alias devices (#199825, #195656)


author: Bill Nottingham <notting@redhat.com> 8.36-1
changelog:
  - rework automatic swapon - only run if AUTOSWAP=yes, and fix errors
    (#198695, #196179, #196208)
  - redo single so it starts last in runlevel 1, and doesn't kill/start
    services itself
  - add configurable delay for killproc() (#198429, <jorton@redhat.com>)
  - fix loop in rename_device (#199242, <markmc@redhat.com>)
  - rc.sysinit: stateless updates (#197972, <law@redhat.com>)
  - support for copying dhcp leases from initramfs (#198601, <markmc@redhat.com>)
  - readonly-root: SELinux works now in the kernel, allow it
  - init.d/network: don't bring down network if root is on a network device
  - init.d/halt: don't use -i to halt; causes problems with iscsi
  - add support for routing rule-$device (#132252, <mitr@redhat.com>)
  - fix rhgb output (#192604, <tonynelson@georgeanelson.com>)
  - fix crypttab options for LUKS (#197656, <mitr@redhat.com>)
  - ipsec: various fixes & new features (#150682, #168972, <mitr@redhat.com>, <alex@milivojevic.org>)
  - ipsec: add check for IKE_METHOD (#197576, <john_smyth@mail.ru>)
  - rename_device: ignore alias devices, fix race (#186355)
  - ifup/ifdown: don't mark as %config
  - rwtab: some additions/cleanup


author: Bill Nottingham <notting@redhat.com> 8.35-1
changelog:
  - readonly root enhancments (modified from <law@redhat.com>, #193164)
  - encrypted swap, non-root filesystem support (#127378, <mitr@redhat.com, <redhat@flyn.org>)
  - clarify killproc usage (#193711, <mitr@redhat.com>)
  - document BRIDGE= (#192576, <mitr@redhat.com>)
  - rc.sysinit: allow for sulogin instead of automatic relabeling (<dwalsh@rehdat.com>)


author: Bill Nottingham <notting@redhat.com> 8.34-1
changelog:
  - link glib2 dynamically now that it's in /lib, conflict with older
    versions
  - handle cups specially when cleaning /var (#189168)
  - remove ifdown-aliases (<mitr@redhat.com>)
  - ifup-ipsec: fix key handling when only one of AH or ESP is used
    (#166257, <mituc@iasi.rdsnet.ro>)
  - IPv6 updates, including RFC 3041 support (<pb@bieringer.de>)
  - routing fixes, add METRIC support for default routes (#124045, <mitr@redhat.com>)
  - fix handling of mount points with white space (#186713, <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.33-1
changelog:
  - support for readonly root
  - rc.sysinit: remove call to zfcpconf.sh - that should be udev rules
  - ifup*: add NETWORKDELAY and LINKDELAY (#176851, <mitr@redhat.com>)
  - rc.sysinit: remove obsolete initrd code (<pjones@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.32-1
changelog:
  - netfs: fix redirect (#187505)
  - rc.sysinit add forcequotacheck (#168118, <mitr@redhat.com>)
  - functions/pidof: various fixes (#182623, others <mitr@redhat.com>)
  - add support for DHCP on bridges (#125259, <mitr@redhat.com>,
    anders@kaseorg.com>)
  - rc.sysinit: use pidof, not killall (#185429, <pjones@redhat.com>)
  - ppp fixes (#129195, #163950, #92023, <mitr@redhat.com>, <avi@argo.co.il>)
  - ifup/ifdown: unset $WINDOW (#174336, <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.30-1
changelog:
  - hotplug: don't cause modules to be reloaded on ifdown/rmmod (#179809)
  - fix endless loops in ifup/ifdown (#177792, #182466)
  - fix enabling of enforcing SELinux mode after relabel (#181893)
  - remove debugging code from ifup-bnep
  - add /proc, /sys mounting back to rc.sysinit
    Note: booting without an initrd is deprecated
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.28-1
changelog:
  - kill nash-hotplug before starting udev (<pjones@redhat.com>)
  - silence warnings on /dev/pts remount (<pjones@redhat.com>)
  - more translation updates


author: Bill Nottingham <notting@redhat.com> 8.27-1
changelog:
  - translation updates
  - lang.sh: revert fix for #176832, it's broken
  - ifup-aliases fixes (<pjones@redhat.com>,<mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.26-1
changelog:
  - revert "rc.sysinit: don't mount usbfs, libusb no longer uses it" change
  - add some ugly hacks to make sure net hotplug doesn't run after unclean
    shutdown (#177795)
  - don't mount /sys and /proc in rc.sysinit - the initrd already does
    (<pjones@redhat.com>)
  - halt: try to unmount tmpfs filesystems before swapoff (#174000,
    <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.22-1
changelog:
  - remove references to /usr/X11R6/bin (#177938)
  - rc.sysinit: fix SELinux message formatting (#178532)
  - rc.sysinit: clean cvs as well (#178539, <ville.skytta@iki.fi>)
  - init.d/halt: move halt.local so that it runs before /  is remounted r/o (#179314)
  - rc.sysinit: don't activate already active dmraids (<pjones@redhat.com>)
  - rc.sysinit: don't mount usbfs, libusb no longer uses it
  - init.d/functions: Add -p to status() (#134363, <mitr@redhat.com>)
  - init.d/functions: Separate /var/run/*.pid handling and pidof calls
    to private functions (#63440, <mitr@redhat.com>)
  - init.d/functions: update for current LSB, including -p pidfile
    (#99325, #134363, <mitr@redhat.com>, <tobias.burnus@physik.fu-berlin.de>)
  - getkey: various cleanups, add man page (#54481, <mitr@redhat.com>)
  - lang.sh: don't always call consoletype (<laroche@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.21-1
changelog:
  - move handling of network hotplug events here, add appropriate udev
    rules, obsolete hotplug
  - get rid of some path lookups (#178321, <mclasen@redhat.com>)
  - get hwaddrs from sysfs as opposed to ip | sed
  - translation updates
  - lang.sh: don't run unicode_start for subshells (#176832)
  - halt: ignore sysfs but not /sys<otherstuff> (#177612, <bnocera@redhat.com>)
  - add service(8) man page (#44857) <mitr@redhat.com>


author: Bill Nottingham <notting@redhat.com> 8.19-1
changelog:
  - Require syslog, for alternate implementations thereof (#172885)
  - Fix fsck invocation for weeding out netdev devices (#175803)


author: Bill Nottingham <notting@redhat.com> 8.17-1
changelog:
  - make sure corefile limiting works for user processes as well
    (#166511, <ville.skytta@iki.fi>)
  - ifup-routes: handle no EOF in the route file (#156972)
  - rc.sysinit: tweak mesage (#156972)
  - ifdown-eth: clean up error message (#135167)
  - rc.sysinit: call kpartx on multipath devices (#160227)
  - ifup-eth: move wireless options before bridge options (#122801)
  - ifup-wireless: silence error (#90601)
  - init.d/functions: change translated string (#54682)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - kmodule: don't probe for uninteresting devices. speeds things up
  - network-functions: deal with broken networks better (#168947)
  - rc.sysinit: automatically reboot if labels are really out of date
    (<dwalsh@redhat.com>)
  - network-functions: throw out nameif error messages
  - rc.sysinit: use multipath.static (#168321)
  - rc.sysinit: use ignorelocking (#168195)


author: Bill Nottingham <notting@redhat.com> 8.12-1
changelog:
  - ifup-eth: fix interface renaming (#158774)
  - rc.sysinit: use modprobe, not insmod (#159120, <tmus@tmus.dk>)
  - remove workaround for the fonts-not-initialized-on-secondary-consoles
    problem (fixed in 2.6.12-rc4 and later)
  - setsysfont: correctly bracket systfontacm (#159706)
  - rc.sysinit: always use udevsend, even if no modules (#160987)
  - ifdown-aliases: add 'cd' to the proper dir (#161170)
  - add diskdump restore support (<tuchida@redhat.com>),
    conflict with appropriate diskdumputils
  - rc.sysinit: dmraid/multipath support
    - remove LVM1 support
  - init.d/functions: handle odd quoting in args (#161316, <stransky@redhat.com>)
  - ifup-wireless: set rate in quotes (#163123)
  - handle lvm & fsck for network block devices (#148764,
    <alewis@redhat.com>)
  - initlog: fix invalid free calls,  (#165033), (#163973,<dwalsh@redhat.com>)
  - sysconfig.txt: remove hdparm docs, since the code isn't there (#162962)
  - updated translations: ms, ja, ko, et, zh_CN, zh_TW, sr, ar


author: Bill Nottingham <notting@redhat.com> 8.11-1
changelog:
  - fix mis-bringup of interfaces due to accidentally matched HWADDR
    (a.k.a. ONBOOT=no not working) (#153669, #157252)
  - support automatic relabeling later if rebooted w/o SELinux
    (<dwalsh@redhat.com>)
  - rc.sysinit: fix fixfiles invocation (#157182)
  - btmp should be 0600 (#156900)
  - translation updates: fr, bg, ru, mk, pa, es


author: Bill Nottingham <notting@redhat.com> 8.09-1
changelog:
  - rc.sysinit: clean up screen sockets (#155969)
  - functions: use pidof -c in various functions
  - ifup-ppp: fix static routes with ppp demand dialing (#20142,
    <ohrn+redhat@chalmers.se>)
  - add btmp support (#155537)
  - don't send dhcp hostname (revert of fix for #149667)
  - more early-login modifications (<mclasen@redhat.com>)
  - functions: fix echo (#155270)


author: Bill Nottingham <notting@redhat.com> 8.08-1
changelog:
  - update translation base
  - automatically send hostname for DHCP if it's available and not
    overridden (#149667)
  - load user-defined module scripts from /etc/sysconfig/modules at
    boot (#123927)
  - halt: reverse sort the mount list, avoiding errors
    (#147254, <jamesodhunt@hotmail.com>)
  - ifup-wireless: add SECURITYMODE (#145407)
  - network-functions: don't error out if hotplug doesn't exist (#140008)
  - ifup: always return errors on trying to bring up nonexistent devices (#131461)
  - ifup: fix error message (#143674)
  - rc.sysinit: add a autorelabel boot target (#154496)
  - prefdm: if something else is specified as $DISPLAYMANAGER, try that (#147304)
  - remove support for the old firewall type
  - network: optimize some (#138557, <drepper@redhat.com>)
  - prefdm: fix prefdm arg handling (#154312, <khc@pm.waw.pl>)
  - gdm early-login support (adapted from <rstrode@redhat.com>)
  - ifup-routes: make sure commented lines are handled correctly (#154353,
    - some sysconfig.txt updates (<link@pobox.com>, <jvdias@redhat.com>)
  - rc.sysinit: fix restorecon invocation (#153100)
  - initlog: free some of the more egregious memory leaks (#85935)
  - initlog: fix potential memory overread (#153685, <in-redhat@baka.org>)
  - remove some conflicts, %post scripts, etc. that were only relelvant
    for upgrades from pre-7.0
  - other minor fixes, see ChangeLog


author: Bill Nottingham <notting@redhat.com> 8.06-1
changelog:
  - handle alternate VLAN naming schemes (#115001, <kas@informatics.muni.cz>)
  - ifup-ipsec: handle non-ascii keys (#150552)
  - add proper ipsec route (#146169, #140654)
  - add a restorecon for /tmp to rc.sysinit
  - document ONHOTPLUG in sysconfig.txt
  - fix mistranslation (#151120)
  - don't return 1 for stopping a process if it isn't running at all
  - don't explicitly set fwd polices for ipsec traffic. Let setkey
    handle it.


author: Bill Nottingham <notting@redhat.com> 8.05-1
changelog:
  - ipv6 cleanups (<pb@bieringer.de>)
  - rc.sysinit: fix rngd check (#130350)
    ... then turn it off entirely
  - rc.sysinit: get rid of duplicate date printout (#149795)
  - ifdown: handle being called on down devices better
  - handle saved resolv.conf on all device types
  - fix network-functions cleanup
  - netfs: fix _netdev unmounting (#147610, <alewis@redhat.com>)
  - dhcp release cleanups (<jvdias@redhat.com>)
  - ifup-bnep: bluetooth update <dwmw2@infradead.org>
  - more ipsec stuff (#147001, <ckjohnson@gwi.net>)


author: Bill Nottingham <notting@redhat.com> 8.04-1
changelog:
  - split out ifup/ifdown general case to ifup/ifdown-eth;
    add ifup/ifdown-bnep (<dwmw2@redhat.com>)
  - ifup-ipsec: add fwd policies (#145507)
  - fix multiple scsi_hostadapter loads (#145432)
  - enable syncookies in sysctl.conf (#145201)


author: Bill Nottingham <notting@redhat.com> 8.03-1
changelog:
  - use udevsend to handle hotplug events (requires recent udev)
  - remove pump, dhcpcd support
  - fix ONxxx (#136531, <cww@redhat.com>)
  - fix various fgreps to not catch commented lines (#136531, expanded
    from <cww@redhat.com>)
  - set ETHTOOL_OPTS on addressless devices (#144682, <mpoole@redhat.com>)
  - kill dhcp client even if BOOTOPROTO is now static (#127726, others)
  - replace the use of route/ifconfig with ip in IPv6 code, remove support
    for ipv6calc (<pb@bierenger.de>, <pekkas@netcore.fi>)
  - fix quoting in daemon() (#144634)
  - make sysctl be silent (#144483)


author: Bill Nottingham <notting@redhat.com> 8.02-1
changelog:
  - remove initlog, minilogd
  - add a flag to kmodule for use with kudzu's socket mode, use it
  - change setting of IPv6 default route (#142308, <pb@bieringer.de>)
  - netfs: don't unmount NFS root FS (#142169)


author: Bill Nottingham <notting@redhat.com> 7.98-1
changelog:
  - various kmodule speedups
  - rc.d/init.d/netfs: don't mount GFS (#140281)
  - fix various minilogd bogosities (#106338)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix check_link_down to still check negotiation if link is
    listed as "up" on entering (#110164, <dbaron@dbaron.org>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - take an axe to rc.sysinit:
    - remove delay on unclean startup
    - remove hdparm code
    - remove LVM1 code
    - remove old raidtab code in favor of mdadm
    - remove support for old isapnp tools
    - move all block device mangling before fsck. run fsck *once*, not twice
    - some more LC_ALL=C stuff


author: Florian La Roche <laroche@redhat.com>
changelog:
  - /etc/rc.d/rc: use "LC_ALL=C grep" for small speedup
  - /etc/rc.d/rc.sysinit:
  	- do not read udev.conf, this seems to be all in the start_udev script
  	- fix detection of "nomodules" kernel command line option
  	- read /proc/cmdline earlier and convert rhgb to use that, too
  	- load_module(): change redirection to /dev/null
  	- some checks for RHGB_STARTED="" looked strange
  - /etc/sysconfig/network-scripts/ifup-ppp:
  	- remove a call to basename with shell builtins
  - /etc/sysconfig/network-scripts/network-functions:
  	- remove some calls to basename/sed with shell builtins


author: Bill Nottingham <notting@redhat.com> 7.93.2-1
changelog:
  - fix prefdm fallback to installed display managers (#137274)
  - fix incorrect rhgb temporary path (#137391)


author: Bill Nottingham <notting@redhat.com> 7.91-1
changelog:
  - rc.d/rc.sysinit: remove devlabel call
  - mdadm support, now that raidtools is gone (#126636, #88785)
  - call ipv6to4 scripts in /etc/ppp/(ip-up|ip-down) (#124390, <dwmw2@redhat.com>)
  - cleanup a couple of nits that could affect bug #134754
  - make sure we return to rhgb after fsck (#133966, #112839, #134449)
  - automatically reboot when fsck calls for it, instead of requiring
    manual intervention (#117641 and duplicates)
  - ifup-wireless: fix key for open vs. restricted (#135235, <dax@gurulabs.com>)
  - translation updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - use runuser instead of su; require it
  - init.d/halt: use right file name for random seed (#134432)


author: Bill Nottingham <notting@redhat.com> - 7.86-1
changelog:
  - use /etc/hotplug/blacklist to blacklist modules in hardware init (#132719)
  - filter indic locales on the console (#134198)


author: Bill Nottingham <notting@redhat.com> - 7.85-1
changelog:
  - ifup, network-functions: fix worked-by-accident shell quoting
  - lang.csh: remove setting of dspmbyte (#89549, <mitr@redhat.com>)
  - SELinux fixes
  - clean up prefdm
  - init.d/functions: export LC_MESSAGES (#133786)
  - allow daemon to coredump if requested (#130175)
  - network-functions: be more liberal in what we accept for link types (#90602, #127984)
  - fix overzealousness with -range aliases (#65415)
  - rc.sysinit: use s-c-keyboard, not kbdconfig (#133929)
  - fix checkpid logic, clean up potential errors (#134030)
  - translation updates


author: Bill Nottingham <notting@redhat.com> - 7.82-1
changelog:
  - fix handling of nonexistent devices (#132839)
  - rhgb enhancements (<veillard@redhat.com>, #132665)
  - initscripts.spec: require nash (#132513)
  - translation updates


author: Dan Walsh <dwalshg@redhat.com> - 7.78-2
changelog:
  - fix setting SELinux contexts on udev-created-in-initrd devices
  - Let restorecon check if selinux is enabled.


author: Bill Nottingham <notting@redhat.com> - 7.77-1
changelog:
  - mount usbfs (#131347)
  - start any automatic raid devices
  - remove triggers for ancient releases, bulletproof remaining ones (#131356)


author: Jason Vas Dias <jvdias@redhat.com> 7.73-1
changelog:
  - Add support for running the DHCPv6 client to ifup 
  - (new DHCPV6C=yes/no ifcfg-${IF} variable) + update sysconfig.txt


author: Bill Nottingham <notting@redhat.com> 7.70-1
changelog:
  - autoload hardware modules on startup
  - minor fsck cleanup (#115028, <leonard-rh-bugzilla@den.ottolander.nl>)
  - ifup: support STP bridging (#123324)
  - rc.sysinit: do a SELinux relabel if forced
  - rc.sysinit: remove devfs compat and the remaining 2.4 compat
  - ifup-wireless: support multiple keys (#127957)
  - fix firmware loading (#129155, <bnocera@redhat.com>)


author: Jason Vas Dias <jvdias@redhat.com> 7.67-1
changelog:
  - fix change_resolv_conf: if pre-existing /etc/resolv.conf
  - non-existent or empty, replace with new file contents.


author: Jason Vas Dias <jvdias@redhat.com> 7.66-1
changelog:
  - Allow users to use generic /etc/dhclient.conf if per-device
  - /etc/dhclient-${DEVICE}.conf is non-existent or empty


author: Bill Nottingham <notting@redhat.com> 7.62-1
changelog:
  - fix up resolv.conf munging (#129921)
  - use rngd if available
  - run start_udev if necessary (#120605)
  - readonly root updates (#129893, <markmc@redhat.com>)
  - ifup-wireless: quote key (#129930)
  - remove rawdevices (#130048)
  - handle binfmt_misc in rc.sysinit for the case where it's built in (#129954)
  - remove mkkerneldoth
  - don't remove linguas in lang.* (part of #9733)
  - fix nfs unmounting (#129765)
  - fix URL (#129433)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix bonding + no IP (#127285)
  - wrap second LVM initialization in vgscan check to avoid extraneous messages (#127639)


author: Bill Nottingham <notting@redhat.com> 7.59-1
changelog:
  - set context on ICE directory after making it (#127099, <concert@europe.com>)
  - don't mount GFS filesystems in rc.sysinit


author: Bill Nottingham <notting@redhat.com> 7.58-1
changelog:
  - rc.d/rc.sysinit: hack: make ICE directory on boot (#86480)
  - set devicetype for xDSL (#126194)
  - ignore locking failures when starting lvm volumes (#126192, <radu@primit.ro>)
  - unset LC_MESSAGES for rhgb (#126020, <ynakai@redhat.com>)
  - bonding fixes
  - setsysfont: remove error (#100559)
  - remove duplicate setting of network routes (#125450)
  - vlan fixes (#107504, <hrunting@texas.net>)
  - ifup-aliases: remove bogus route setting (#120908)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix bridging confusing module order (#122848, <luto@myrealbox.com>)
  - rc.d/rc.sysinit: don't mount cifs (#122501)


author: Bill Nottingham <notting@redhat.com> 7.51-1
changelog:
  - get rid of LVM error when no volumes are defined (#121197)
  - fix selinux short-circuit test (#121143, <michal@harddata.com>)
  - /dev/mapper/control is a special file, check it accordingly (#121963)
  - support ETHTOOL_OPTS on bonding slaves (#119430, <hrunting@texas.net>)
  - handle multiple spaces correctly in rc.sysinit, network-functions
    (#118583, <pallas@kadan.cz>)
  - cleanup fd leaks, mem leaks, other bogosities
    (#119987, <linux_4ever@yahoo.com>)
  - rc.d/init.d/network: remove ipv6 bogosity (#114128)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 7.50-1
changelog:
  - fix LVM issues in rc.sysinit (#120458, #119975)
  - deal with fixed racoon parser
  - translation updates from translators
  - fix USB loading (#120911)


author: Bill Nottingham <notting@redhat.com> 7.49-1
changelog:
  - use alsa for mixer saving in halt
  - don't umount /proc in halt (#118880)
  - various translation updates from translators


author: Bill Nottingham <notting@redhat.com> 7.47-1
changelog:
  - translation: catch more input strings (#106285, <mitr@volny.cz>)
  - remove autologin from prefdm (#108969)
  - return to rhgb after ./unconfigured (#109807, <jkeating@j2solutions.net>)
  - handle iso15 in setsysfont (#110243)
  - clean up samba & vmware in rc.sysinit (#113104)
  - some sysconfig.txt documentation (#110427, #118063)
  - fix bug in umount-on-halt (#113088, <giardina@airlab.elet.polimi.it>)
  - handle CIFS in netfs (#115691)
  - make sure hotplug isn't stuck unset (#116666, <aoliva@redhat.com>)
  - handle network fs better in rc.sysinit (#111290)
  - nomodules applies to usb/firewire too (#113278)
  - ipsec fix (#116922, <felipe_alfaro@linuxmail.org>)
  - make sure rc exits cleanly (#117827, <enrico.scholz@informatik.tu-chemnitz.de>)
  - fsck root FS from initrd, for dynamic majors (#117575, <sct@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.44-1
changelog:
  - NFSv4 support (<chucklever@bigfoot.com>, <steved@redhat.com>)
  - handle 2.6-style 'install ethX ...' lines correctly
  - mount sysfs by default
  - time to clean up the cruft. remove:
    - boot-time depmod
    - linking of /boot/System.map to /boot/System.map-`uname -r`
    - /var/log/ksyms.X
    - libredhat-kernel support


author: Bill Nottingham <notting@redhat.com> 7.31-1
changelog:
  - fix bonding + dhcp (#91399)
  - fix typo (#103781)
  - sysconfig/network-scripts/ifup: fix use of local

  - fix shutdown with NFS root (#100556, <Julian.Blake@cern.ch>)
  - remove /var/run/confirm when done with /etc/rc (#100898)
  - ipcalc: fix some memory handling (#85478, <miked@ed.ac.uk>)
  - handle sorting > 10 network devices (#98209)
  - unset ONPARENT after use (#101384)
  - random other fixes
  - bridging support (<dwmw2@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.29-1
changelog:
  - setsysfont: don't echo to /dev/console (#102004)
  - fix ethernet device renaming deadlock (#101566)
  - consoletype: don't return 'vt' on vioconsole (#90465)
  - ifup: fix short-circuit (#101445)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - ifup-routes: pass the interface name to handle_file() so that we don't try
    to use the routes file's name as an interface name


author: Bill Nottingham <notting@redhat.com> 7.27-1
changelog:
  - add a check to consoletype for the current foreground console
  - use it when running unicode_start (#98753)


author: Bill Nottingham <notting@redhat.com> 7.26-1
changelog:
  - ipsec support (see sysconfig.txt, ifup-ipsec)
  - read $CONFIG.keys, for non-world-readable keys
  - allow default window size for routes to be set with WINDOW= (#98112)
  - support setting device options with ethtool opts
  - fix s390 bootup spew (#98078)
  - support renaming interfaces with nameif based on hwaddr


author: Bill Nottingham <notting@redhat.com> 7.25-1
changelog:
  - fix DNS punching in the case of other rules for the DNS server
    (#97686, <martin@zepler.org>)
  - initlog, ppp-watch, and usernetctl tweaks (<linux_4ever@yahoo.com>)
  - fix grep for mingetty (#97188)
  - fix rhgb-client bad syntax
  - change network device searching, use correct naming, fix route issues
    (<harald@redhat.com>)
  - other random tweaks


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - initscripts-s390.patch: remove not needed parts about PNP=
  - inittab.390: sync with normal version
  - rc.sysinit: remove two further calls to /sbin/consoletype with $CONSOLETYPE


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - sysconfig/init.s390: set LOGLEVEL=3 as for other archs
  - rc.d/init.d/network, rc.d/rc: change confirmation mode to
    not use an environment variable
  - rc.d/init.d/functions: make strstr() even shorter, remove old
    "case" version that has been already commented out
  - rc.d/rc.sysinit:
  	- no need to set NETWORKING=no, it is not used/exported
  	- do not export BOOTUP
  	- delete two "sleep 1" calls that wants to add time to go
  	  into confirmation mode. There is enough time to press a
  	  key anyway or use "confirm" in /proc/cmdline.
  	- read /proc/cmdline into a variable
  	- use strstr() to search in /proc/cmdline
  	- add "forcefsck" as possible option in /proc/cmdline
  	- while removing lock files, no need to call `basename`
  	- add unamer=`uname -r` and reduce number of forks
  	- do not fork new bash to create /var/log/ksyms.0


author: Karsten Hopp <karsten@redhat.de> 7.15-1
changelog:
  - Mainframe has no /dev/ttyX devices and no mingetty, don't 
    initialize them. This gave error messages during startup


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - init.d/network: don't advertise "probe: true" in the header if we don't
    recognize "probe" as an argument


author: Bill Nottingham <notting@redhat.com> 7.09-1
changelog:
  - initialize two ttys past # of mingettys (for GDM)
  - fix zeroconf route
  - redhat-config-network writes $NAME.route for some static routes
    (e.g., ppp); handle that (#84193)


author: Bill Nottingham <notting@redhat.com> 7.08-1
changelog:
  - load keybdev & mousedev even if hid is already loaded/static
  - run fewer scripts through action (#49670, #75279, #81531)


author: Bill Nottingham <notting@redhat.com> 7.07-1
changelog:
  - fix nicknames & profiles (#82246)
  - fix check_device_down (#83780, <pzb@datstacks.com>)
  - vlan fixes (<tis@foobar.fi>)
  - fix groff macros (#83531, <tsekine@sdri.co.jp>)
  - various updated translations
  - fix checkpid for multiple pids (#83401)


author: Bill Nottingham <notting@redhat.com> 7.04-1
changelog:
  - tweak some translatable strings
  - fix for rc.sysinit on machines that pass arguments to mingetty
    (<nalin@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.03-1
changelog:
  - move system font setting sooner (<milan.kerslager@pslib.cz>)
  - fix link checking for dhcp, use both ethtool and mii-tool
  - fix CJK text on the console, and locale-archive held open
    on shutdown
  - IPv6 updates <pekkas@netcore.fi>, <pb@bieringer.de>
  - speedup tweaks (<drepper@redhat.com>)
  - use glib2 for ppp-watch (#78690, <kisch@mindless.com>)
  - add zeroconf route (#81738)
  - fix ifup-ppp for dial-on-demand, and onboot (<goeran@uddeborg.pp.se>)
  - tweak raidtab parsing, don't worry about not-in-fstab RAID devices
    (#71087, #78467, <aja@mit.edu>)
  - don't automatically bring up aliases if 'ONPARENT=no' is set (#78992)
  - getkey cleanups/tweaks (#76071, <ben@enchantedforest.org>)
  - rework halt_get_remaining (#76831, <michal@harddata.com>)
  - ipcalc: fix calculation of /32 addresses (#76646)
  - various other tweaks and fixes


author: Bill Nottingham <notting@redhat.com> 7.00-1
changelog:
  - tweaks for potential GUI bootup
  - loop checking for network link state, don't unilterally wait five
    seconds


author: Bill Nottingham <notting@redhat.com> 6.97-1
changelog:
  - IPv6 update (<pekkas@netcore.fi>, <pb@bieringer.de>)
  - devlabel support (<Gary_Lerhaupt@Dell.com>)
  - do lazy NFS umounts


author: Bill Nottingham <notting@redhat.com> 6.96-1
changelog:
  - fix various static-routes brokeness (#74317, #74318, #74320, #76619,
    - fix handling of SYSFONTACM in setsysfont (#75662)
  - fix lang.csh for CJK (#76908, <ynakai@redhat.com>)
  - IPv6 update (<pekkas@netcore.fi>, <pb@bieringer.de>)
  - other minor tweaks


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't infinite loop on ifdown
  - remove disabling of DMA; this can cause problems
  - move swap startup to after LVM (#66588)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't cycle through eth0-eth9 on dhcp link check (#68127)
  - don't retry indefinitely on ppp startup
  - activate network profile passed on kernel commandline via netprofile=
  - fix iptables invocations again
  - translation refresh


author: Bill Nottingham <notting@redhat.com>
changelog:
  - require /etc/redhat-release (#68903)
  - fix tty2-tty6 (sort of)
  - fix iptables invocations (#70807, #71201, #68368)
  - other minor tweaks


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - /sbin/service: set PATH before calling startup scripts
    HOME and TERM are also set during bootup, but they should not make
    a difference for well-written daemons.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - /etc/init.d/functions:
  	daemon(): avoid starting another bash
  	killproc(): avoid starting another bash for the default case
  - do not call "insmod -p" before loading the "st" module


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - allow an option for ups poweroff  #68123
  - change grep for ONBOOT=  #63903
  - allow building with a cross-compiler  #64362,#64255
  - faster check in network-functions:check_default_route()
  - better checks for backup files
  - drastically reduce the number of consoletype invocations
  - do not export "GATEWAY" in network-functions
  - code cleanups in rc.sysinit


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - rc.sysinit: do not load raid modules unless /etc/raidtab exists
  - many cleanups for more consistent shell programming and also
    many smaller speedups within network scripts, no un-necessary sourcing
    of files etc
  - nearly re-code /etc/rc.d/rc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - start some sh coding cleanups
  - change to /etc/init.d/functions
  - eliminate some un-necessary PATH settings
  - eliminate some TEXTDOMAIN settings


author: Bill Nottingham <notting@redhat.com> 6.64-1
changelog:
  - make sure chatdbg is set before using it (#63448, <Bertil@Askelid.com>)
  - allow tweaking of more devices with hdparm (#53511), and
    tweak non-disk devices iff they explicitly have a config file
    for that device (#56575, #63415)
  - some translation updates


author: Bill Nottingham <notting@redhat.com> 6.63-1
changelog:
  - ipcalc cleanups (#58410)
  - quit stripping binaries
  - do LVM init after RAID init too (#63238)
  - export all locale variables (#56142)
  - run sysctl -p after network init as well


author: Bill Nottingham <notting@redhat.com> 6.62-1
changelog:
  - delete X/VNC locks on startup (#63035)
  - shut up DMA disabling, move it to after ide-scsi (#62873, #62956)
  - use full path to /sbin/ifconfig (#59457)
  - /sbin/service: change to root directory before staring/stopping;
    also sanitize environment


author: Bill Nottingham <notting@redhat.com> 6.56-1
changelog:
  - use nameif for interfaces where we don't agree on HWADDR with the
    config file (<harald@redhat.com>)
  - LSB support tweaks


author: Mike A. Harris <mharris@redhat.com> 6.55-1
changelog:
  - Removed process accounting stuff from rc.sysinit and halt scripts as it is
    now handled by the psacct initscript in the psacct package


author: Than Ngo <than@redhat.com>
changelog:
  - add ISDN patches from pekkas@netcore.fi and pb@bieringer.de (bug #52491)
  - fix handling of ISDN LSZ Compresssion


author: Bill Nottingham <notting@redhat.com> 6.31-1
changelog:
  - message un-tweaks (<johnsonm@redhat.com>)
  - make getkey more useful, fix some of the autofsck stuff (<johnsonm@redhat.com>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix a broken call to check_device_down
  - make all loopback addresses have host scope, not global scope.
    Fixes #49374, possibly others


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add is_available() network function, use it; cleans up ugly modprobe
    error messages
  - update translation info
  - fix #51787


author: Than Ngo <than@redhat.com>
changelog:
  - don't set MSN if it' empty (it's now optional)
  - don't give login name as a cmdline-option (Bug #23066)
  - remove peer device file if ppp connection is down
  - fix channel bundling


author: Bill Nottingham <notting@redhat.com>
changelog:
  - tweak raittab grep slightly (#51231)
  - allow resetting of default route for DHCP addresses (#48994)
  - save resolv.conf in ifup-ppp for restoration by ifdown-post (#50759)
  - when munging firewall rules for dns, only allow dest ports 1025-65535 (#44038, #40833)
  - allow shell characters in ppp names (#43719)
  - allow setting DHCP arguments, just kill dhcpcd instead of using -k (#46492)
  - behave sanely if ifup called when dhcpcd is running (#49392, #51038)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - honor HOTPLUG=no if running under hotplug (#47483)
  - use awk, not grep, for modprobe -c checks (#49616)
  - don't print ugly messages for the case where the device doesn't exist,
    and there is no alias (i.e., PCMCIA ONBOOT=yes (#various))
  - run kbdconfig in /.unconfigured mode (#43941)
  - use a bigger buffer size argument to dmesg (#44024)
  - detach loopback devices on shutdown (#43919, #45826)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't use kbd commands in setsysfont now that we've switched back to
    console-tools (#50075)
  - sleep in check_link_down; some devices require it
  - only bring link down if check_link_down fails


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update netdev stuff to use _netdev
  - IPv6 updates (<pekkas@netcore.fi>)
  - fix downing of devices with static IPs (#49777, #49783)
  - put ifcfg-lo back in the package


author: Bill Nottingham <notting@redhat.com>
changelog:
  - own some more directories
  - use -O nonetdev, require mount package that understands this
  - fix do_netreport when called as non-root
  - remove ip addresses from interfaces on ifdown
  - oops, fix ifup/ifdown


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix '--check'
  - prereq sh-utils (#43065)
  - fix some invocations of reboot/halt (#45966)
  - fix typo in ifup-wireless
  - don't muck with /etc/issue each boot
  - big IPv6 update (<pekkas@netcore.fi>)


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - disable hwclock on S390 (no such executable)
  - Fix up kernel versioning on binary-only modules (S390)
  - don't use newt scripts on S390 console


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - reenable pump, but make sure dhcpcd is the default. This
    way, upgrades of systems without dhcpcd has a better chance at
    working.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run ifup ppp0 if ppp-watch gets SIGINT (#40585, ak@cave.hop.stu.neva.ru)
  - fix do_netreport (#37716, #39603 <crlf@aeiou.pt>)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - copyright: GPL -> license: GPL
  - fix a syntax error in lang.csh
  - skip commented-out i18n configuration lines in lang.csh


author: Bill Nottingham <notting@redhat.com>
changelog:
  - IPv6 fixes (#30506)
  - make static-routes handling more sane and consistent (#29500, #29549)
  - handle multiple USB controllers *correctly*


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - usernetctl, ppp-watch: cleanups
  - netreport: use O_NOFOLLOW
  - ifup-ppp: let ppp-watch watch over demand-dialed connections (#28927)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run isapnp on isapnp-enabled 2.4 kernels (part of #29450)
  - disable hotplug during network initscript
  - don't munge wireless keys in ifup; that will be done with the
    PCMCIA wireless stuff
  - run sndconfig --mungepnp for non-native-isapnp soundcards
  - don't explicitly kill things in init.d/single, init will do it
  - don't explicitly load usb-storage; mount the usbdevfs before initializing
    host controller modules


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix some substitions in init.d/functions (fixes various killproc issues)
  - make sure ipv6 module alias is available if configured
  - fix initlog segfaults in popt when called with bogus stuff (#28140)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make pidofproc() and killproc() try to use the PID associated with the full
    pathname first before killing the daemon by its basename (for daemons that
    share the same basename, i.e. "master" in postfix and cyrus-imapd) (#19016)
  - fix status() as well


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add all save changes for s390 s390x that won't break anything
    patches are from Oliver Paukstadt @ millenux.com


author: Bill Nottingham <notting@redhat.com>
changelog:
  - modify firewall on ifup to allow any new DNS servers through (#25951)
  - don't muck with the font in lang.csh/lang.sh (#26349)
  - don't display Japanese if we aren't on a pty (#25041)
  - load ide-scsi if passed on /proc/cmdline


author: Bill Nottingham <notting@redhat.com>
changelog:
  - various init.d/functions cleanups (#10761, from <mjt@tls.msk.ru>)
  - in daemon(), only look at pidfile to determine if process is running
    (#17244, others)
  - ifup-ppp enhancements (#17388, from <ayn2@cornell.edu>)
  - ipv6 support (#23576, originally by Peter Bieringer <pb@bieringer.de>)
  - lots of other minor fixes (see ChangeLog)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add plusb support (#18892, patch from <eric.ayers@compgen.com>)
  - don't ignore RETRYTIMEOUT when we never connect (#14071, patch from
    <ak@cave.hop.stu.neva.ru>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - do LVM setup through normal initscripts mechanisms
  - ignore backup files in /etc/sysconfig/network-scripts
  - lots of .po file updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - only load sound if persistent DMA buffers are necessary
  - fix lots of bugs: #18619, #21187, #21283, #12097
  - integrate MAXFAIL option for ppp-watch
  - don't load keymaps/fonts on a serial console


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - changed hdparm section in rc.sysinit to allow different
    parameters for each disk (if needed) by copying 
    /etc/sysconfig/harddisks to /etc/sysconfig/harddiskhda (hdb,hdc..)
  - fix RFE #20967


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - handle "gw x.x.x.x" as the last pair of flags in ifup-routes (#18804)
  - fix top-level makefile install target
  - make usernetctl just fall-through if getuid() == 0


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add usleep after kill -KILL in pidofproc, works around lockd issues (#14847)
  - add some fallback logic to prefdm (#16464)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't load usb drivers if they're compiled statically
  - don't call ifdown-post twice for ppp (#15285)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - remove console-tools requirement
  - in netfs, start portmap if needed
  - cosmetic cleanups, minor tweaks
  - don't probe USB controllers


author: Matt Wilson <msw@redhat.com>
changelog:
  - kill all the PreTransaction stuff
  - directory ownership cleanups, add more LSB symlinks
  - move all the stuff back in to /etc/rc.d/


author: Bill Nottingham <notting@redhat.com>
changelog:
  - tweak %pre back to a mv (rpm is fun!)
  - do USB initialization before fsck, so keyboard works if it fails


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - ifup-ppp: add hooks for demand-dialing PPP
  - functions: use basename of process when looking for its PID file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't create resolv.conf 0600
  - don't run ps as much (speed issues)
  - allow setting of MTU
  - other minor fixes


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - check that LC_ALL/LINGUAS and LANG are set before referencing them in lang.csh
  - fix check for /var/*/news, work around for bug #9140


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - attempt to restore default route if PPP takes it over
  - man page fix for ipcalc
  - shvar cleaning
  - automate maintaining /boot/System.map symlinks


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - improvements in clone device handling
  - better signal handling in ppp-watch
  - yet another attempt to fix those rare PAP/CHAP problems


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fix more possible failed CHAP authentication (with chat scripts)
  - fix ppp default route problem
  - added ppp-watch man page, fixed usernetctl man page
  - make ifup-ppp work again when called from netcfg and linuxconf
  - try to keep ppp-watch from filling up logs by respawning pppd too fast
  - handle all linuxconf-style alias files with linuxconf


author: Bill Nottingham <notting@redhat.com>
changelog:
  - load mixer settings for monolithic sound
  - man page for ppp-watch
  - add ARP variable for ifup
  - some i18n fixes


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fix some failed CHAP authentication
  - fix extremely unlikely, but slightly possible kill-random-process
    bug in ppp-watch
  - allow DNS{1,2} in any ifcfg-* file, not just PPP, and
    add nameserver entries, don't just replace them
  - don't use /tmp/confirm, use /var/run/confirm instead


author: Bill Nottingham <notting@redhat.com>
changelog:
  - assorted brown paper bag fixes
  - check for programs/files before executing/sourcing them
  - control stop-a like magic sysrq


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - ppp-watch now always kills pppd pgrp to make sure dialers are dead,
    and tries to hang up the modem


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - add --remotename option to wvdial code
  - make sure we do not have an earlier version of wvdial that doesn't
    know how handle --remotename
  - make ppp-watch background itself after 30 seconds even if
    connection does not come up, at boot time only, so that a
    non-functional PPP connection cannot hang boot.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - new NFS unmounting from Bill Rugolsky <rugolsky@ead.dsa.com> 
  - fix ifup-sl/dip confusion
  - more raid startup cleanup
  - make utmp group 22


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - use new linkname argument to pppd to make if{up,down}-ppp
    reliable -- requires ppp-2.3.9 or higher


author: Bill Nottingham <notting@redhat.com>
changelog:
  - stability fixes for initlog
  - initlog now has a config file
  - add alias speedup from dharris@drh.net
  - move netfs links
  - usleep updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't make module-info, System.map links
  - handle utmpx/wtmpx
  - fix lots of bugs in 4.21 release :)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - clean out /var better
  - let everyone read /var/run/ppp*.dev
  - fix network startup so it doesn't depend on /usr


author: Bill Nottingham <notting@redhat.com>
changelog:
  - load keymaps & console font early
  - fixes for channel bonding, strange messages with non-boot network interfaces


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run linuxconf if /usr isn't mounted
  - set macaddr before bootp
  - zero in the /var/run/utmpx file (gafton)
  - don't set hostname on ppp/slip (kills X)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - doc updates
  - support for SYSFONTACM, other console-tools stuff
  - add net route for interface if it isn't there.
  - fix for a bash/bash2 issue


author: Bill Nottingham <notting@redhat.com>
changelog:
  - Mmm. Must always remove debugging code. before release. *thwap*
  - pump support
  - mount -a after mount -a -t nfs


author: Bill Nottingham <notting@redhat.com>
changelog:
  - bugfixes (ifup-ppp, kill -TERM, force fsck, hwclock --adjust, setsysfont)
  - add initlog support. Now everything is logged (and bootup looks different)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - rc.sysvinit should be working with all kernel versions now
  - requires e2fsprogs (for fsck)
  - set INPUTRC and LESSCHARSET on linux-lat


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - /etc/rc.d/rc: don't run /etc/rc.d/rcN.d/[KS]??foo.{rpmsave,rpmorig} scripts.
  - /etc/rc.d/rc.sysinit: raid startup (Nigel.Metheringham@theplanet.net).
  - /sbin/setsysfont: permit unicode fonts.


author: Erik Troan <ewt@redhat.com>
changelog:
  - ipcalc should *never* have been setgid anything
  - depmod isn't run properly for non-serial numbered kernels


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added lots of linuxconf support.  Should still work on systems that
    do not have linuxconf installed, but linuxconf gives enhanced support.
  - In concert with linuxconf, added IPX support.  Updated docs to reflect it.


author: Erik Troan <ewt@redhat.com>
changelog:
  - touch /var/lock/subsys/kerneld after cleaning out /var/lock/subsys
  - the logic for when  /var/lock/subsys/kerneld is touched was backwards


author: Erik Troan <ewt@redhat.com>
changelog:
  - tried to get /proc stuff right one more time (uses -t nonfs,proc now)
  - added support for /fsckoptions
  - changed 'yse' to 'yes' in KERNELD= line


author: Erik Troan <ewt@redhat.com>
changelog:
  - set domainname to "" if none is specified in /etc/sysconfig/network
  - fix /proc mounting to get it in /etc/mtab


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed network-scripts to allow full pathnames as config files
  - removed some old 3.0.3 pcmcia device handling


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - /var/run/netreport needs to be group-writable now that /sbin/netreport
    is setguid instead of setuid.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added network-functions to spec file.
  - Added report functionality to usernetctl.
  - Fixed bugs I introduced into usernetctl while adding clone device support.
  - Clean up entire RPM_BUILD_ROOT directory in %clean.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Clone device support in network scripts, rc scripts, and usernetctl.
  - Disassociate from controlling tty in PPP and SLIP startup scripts,
    since they act as daemons.
  - Spec file now provides start/stop symlinks, since they don't fit in
    the CVS archive.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - reworked status() to adjust for processes that change their argv[0] in
    the process table.  The process must still have it's "name" in the argv[0]
    string (ala sendmail: blah blah).


author: Donald Barnes <djb@redhat.com>
changelog:
  - added status function to functions along with better killproc 
    handling.
  - added /sbin/usleep binary (written by me) and man page
  - changed BuildRoot to /var/tmp instead of /tmp


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - /sbin/netreport sgid rather than suid.
  - /var/run/netreport writable by group root.

  - /etc/ppp/ip-{up|down} no longer exec their local versions, so
    now ifup-post and ifdown-post will be called even if ip-up.local
    and ip-down.local exist.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Support for net event notification:
    Call /sbin/netreport to request that SIGIO be sent to you whenever
    a network interface changes status (won't work for brining up SLIP
    devices).
    Call /sbin/netreport -r to remove the notification request.
  - Added ifdown-post, and made all the ifdown scrips call it, and
    added /etc/ppp/ip-down script that calls /etc/ppp/ip-down.local
    if it exists, then calls ifdown-post.
  - Moved ifup and ifdown to /sbin


author: Erik Troan <ewt@redhat.com>
changelog:
  - Added DHCP support
  - Set hostname via reverse name lookup after configuring a networking
    device if the current hostname is (none) or localhost


author: Erik Troan <ewt@redhat.com>
changelog:
  - Got rid of xargs dependency in halt script
  - Don't mount /proc twice (unmount it in between)
  - sulogin and filesystem unmounting only happened for a corrupt root 
    filesystem -- it now happens when other filesystems are corrupt as well


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added MTU for PPP.
  - Put PPPOPTIONS at the end of the options string instead of at the
    beginning so that they override other options.  Gives users more rope...
  - Don't do module-based stuff on non-module systems.  Ignore errors if
    st module isn't there and we try to load it.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Changed ifup-ppp and ifdown-ppp not to use doexec, because the argv[0]
    provided by doexec goes away when pppd gets swapped out.
  - ifup-ppp now sets remotename to the logical name of the device.
    This will BREAK current PAP setups on netcfg-managed interfaces,
    but we needed to do this to add a reasonable interface-specific
    PAP editor to netcfg.


author: Erik Troan <ewt@redhat.com>
changelog:
  - Added usernetctl wrapper for user mode ifup and ifdown's and man page
  - Rewrote ppp and slip kill and retry code 
  - Added doexec and man page


author: Vojtech Vitek <vvitek@redhat.com> - 3.0.6-3
changelog:
  - Add upstream patch to fix CVE-2011-1097 - Incremental file-list
    corruption due to temporary file_extra_cnt increments
    Resolves: #688923


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 3.0.6-2
changelog:
  - Remove BuildRequires dependency on popt-devel, until the package
    is being shipped with RHEL-5 (resolve build issues)


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 3.0.6-1
changelog:
  - Rebase to upstream version 3.0.6
    Resolves: #339971, #471182, #575022, #616093
  - Make "-d, --dirs options" behaviour backward-compatible with 2.6.8
    Resolves: #339971 (comment #5)
  - Truncate a copied sparse file at the end of transaction (-S, --sparse option)
    Resolves: #530866
  - Add -fno-strict-aliasing to CFLAGS
  - Remove obsolete rsync-2.6.8-xattr_bug.patch
  - Switch license to GPLv3+ (upstream change beginning with 3.0.0)


author: Jay Fenlason <fenlason@redhat.com> 2.6.8-3
changelog:
  - Add my xattrs_bug patch to fix a bug where xattrs don't get sent correctly.
  - Add BuildRequires to make sure libattr-devel and libacl-devel are avaliable
  - replace --with... with --enable... so they actually work
  - Add make, autoconf and gcc to BuildRequires


author: Jay Fenlason <fenlason@redhat.com> 2.6.8-2
changelog:
  - New upstream release
  - Use the upstream xattr patch instead of mine.  This closes
    bz#190208 CVE-2006-2083 rsync buffer overflow issue


author: Jay Fenlason <fenlason@redhat.com> 2.6.4-3
changelog:
  - Include the -address patch from upstream, to close
    bz#154752 Unable to use --address in client mode


author: Jay Fenlason <fenlason@redhat.com> 2.6.3-0.pre1
changelog:
  - New upstream version with security fix for CAN-2004-0792
  - This obsoletes the -lastdir-corruption patch.


author: Jay Fenlason <fenlason@redhat.com> 2.6.2-0
changelog:
  - New upstream version to correct the problems with 2.6.1.
    This obsoletes all the patches to 2.6.1


author: Jay Fenlason <fenlason@redhat.com> 2.6.1-1
changelog:
  - Rsync 2.6.1 final.
  - Add a patch from Wayne Davison <wayned@samba.org> that fixes a
    use of uninitilized memory in the map_uid and map_gid functions.
  - Add another patch from Wayne Davidson that fixes the -R option.
  - Add a patch (extracted from a patch by Sami Farin
    <safari-rsync@safari.iki.fi>) to not ignore the return value
    of close().


author: Hardy Merrill <hmerrill@redhat.com> 2.5.6-15
changelog:
  - add rsync-2.5.6-signal.patch to fix kernel warnings that
    appear because socket.c sets SIGCHLD to SIG_IGN and then
    calls wait.  This is in response to bug#98740.  This patch
    *has* been committed to CVS upstream and will be in
    upstream rsync-2.5.7.


author: Hardy Merrill <hmerrill@redhat.com> 2.5.6-6
changelog:
  - removed patch rsync-2.5.4-maxdel.patch
  - removed patch rsync-2.4.6-segv.patch
     - current 2.5.6 properly handles (no segfault) the situation
       (rsync '[a]') that caused a need for this patch.
  - added patch rsync-2.5.6-sign.patch, which is a working
    subset of patches (that still apply) included in the original
    rsync-2.5.4-moresignage.patch


author: Bill Nottingham <notting@redhat.com> 2.5.4-2
changelog:
  - upstream patches: fix accidental use of --whole-file, fix
    minor memory leak, and bad worst-case child kill behavior
  - make passing -e to rsync:// URLs not cause an error exit (#62489)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix some signed/unsigned issues (<krahmer@suse.de>)
  - tweak ipv6 patch (#55337, <john.l.villalovos@intel.com>)
  - make xinetd file %config(noreplace)


author: John A. Martin <jam@jamux.com>
changelog:
  - Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
    was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
    showing no packager nor signature but giving 
    "Source RPM: rsync-1.6.3-1.src.rpm".
  - Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
    to '%build
  LANG=C
  export LANG
  unset DISPLAY
  ', removed '%prefix'.


author: Doug Ledford <dledford@redhat.com> - 1.1.0-0.3355.1.el5
changelog:
  - Update to final ofed 1.4.1 bits
  - Compile against non-XRC libibverbs
  - Related: bz506258, bz506097


author: Doug Ledford <dledford@redhat.com> - 1.1.0-0.2931.2
changelog:
  - Incorporate fixups to Requires(post) and Requires(preun) from openmpi
  - Fix up post/preun scripts to work like the scripts from openmpi11
  - Resolves: bz465448


author: Doug Ledford <dledford@redhat.com> - 1.1.0-0.2931.1
changelog:
  - Rearrange the position of the svn tag in the n-v-r so z stream updates
    won't be so ugly should they ever be needed


author: Pavel Shamis <pasha@mellanox.co.il>
changelog:
  - the %build
  LANG=C
  export LANG
  unset DISPLAY
   macro was removed,workaround for SUSE issue - %build
  LANG=C
  export LANG
  unset DISPLAY
   removes $RPM_BUILD_ROOT
  - added "-libcommon" for SuSe10


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-28
changelog:
  - Fix for rhbz769731 - HA LVM failure to remove tag thwarts service relocation
    Resolves: rhbz#769731


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-26
changelog:
  - rgmanager: Add extra service status call
    rgmanager: Avoid duplicate restart of service
    rgmanager: Fix call to service_status()
    rgmanager: Fix tiny memory leak in sl_service_status
    rgmanager: Fix dependency issue related to ordering
    Resolves: rhbz#743214


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-23
changelog:
  - resource-agents: nfsclient: fix wildcard status checks
    Resolves: rhbz#700103
  - rgmanager: Mark services on dead nodes as stopped
    rgmanager: Send events on service stop & preserve frozen flag
    Resolves: rhbz#722230
  - resource-agents: Handle TREX and Webdispatcher in SAPInstance
    Resolves: rhbz#746992


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-22
changelog:
  - rgmanager: Fix ASEHAagent to allow for multiple ASEHA resources on one machine.
    rgmanager: Fix ASEHAagent to make server_name unique
    Resolves: rhbz#690265
  - rgmanager: Resolve rare deadlock
    Resolves: rhbz#713243
  - rgmanager: Add -F to clusvcadm man page
    Resolves: rhbz#715052
  - rgmanager: Fix dependency restart bug
    rgmanager: Fix dependency restart bug in CP mode
    Resolves: rhbz#743442
  - resource-agents: orainstance.sh: Fix temporary variables
    Resolves: rhbz#744283


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-21
changelog:
  - rgmanager: Fix bad passing of SFL_FAILURE up
    (fix_bad_passing_of_sfl_failure_up.patch)
    Resolves: rhbz#711521


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-20
changelog:
  - resource-agents: Improve LD_LIBRARY_PATH handling by SAP*
    (resource_agents_improve_ld_library_path_handling_by_sap*.patch)
    Resolves: rhbz#710637


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-19
changelog:
  - Fix changelog format
  - rgmanager: Fix reference count handling
    (fix_reference_count_handling.patch)
    Resolves: rhbz#692771


author: Marek Grac <mgrac@redhat.com> - 2.0.52-18
changelog:
  - resource-agents: postgres-8 resource agent does not detect a failed
    start of postgres server 
    (postgres-8-Fix_pid_files.patch)
    Resolves: rhbz#663827


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-16
changelog:
  - rgmanager: Allow non-root clustat
    (allow_non_root_clustat.patch)
    Resolves: rhbz#510300
  - rgmanager: Initial commit of central proc + migration support
    (central_proc_+_migration_support.patch)
    Resolves: rhbz#525271
  - rgmanager: Make clufindhostname -i predictable
    (make_clufindhostname_i_predictable.patch)
    Resolves: rhbz#592613
  - resource-agents: Trim trailing slash for nfs clients
    (trim_trailing_slash_for_nfs_clients.patch)
    Resolves: rhbz#592624
  - rgmanager: Update last_owner on failover
    (update_last_owner_on_failover.patch)
    Resolves: rhbz#610483
  - rgmanager: Pause during exit if we stopped services
    (pause_during_exit_if_we_stopped_services.patch)
    Resolves: rhbz#619468
  - rgmanager: Fix quotaoff handling
    (fix_quotaoff_handling.patch)
    Resolves: rhbz#637678
  - resource-agents: Try force-unmount before fuser for netfs.sh
    (try_force_unmount_before_fuser_for_netfs_sh.patch)
    Resolves: rhbz#678494
  - rgmanager: Improve rgmanager's exclusive prioritization handling
    (improve_rgmanager_s_exclusive_prioritization_handling.patch)
    Resolves: rhbz#680256


author: Marek Grac <mgrac@redhat.com> - 2.0.52-15
changelog:
  - resource-agents: postgres-8 resource agent does not detect a failed
    start of postgres server 
    (postgres-8-Do-not-send-TERM-signal-when-killing-post.patch)
    (postgres-8-Improve-testing-if-postgres-started-succe.patch)
    Resolves: rhbz#663827


author: Marek Grac <mgrac@redhat.com> - 2.0.52-14
changelog:
  - resource-agents: Fix problems when generating XML configuration file
    (rgmanager-Fix-problems-in-generated-XML-config-file.patch)
    Resolves: rhbz#637802


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-13
changelog:
  - resource-agents: Use literal quotes for tr calls
    (resource_agents_use_literal_quotes_for_tr_calls.patch)
    Resolves: rhbz#637154


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-12
changelog:
  - resource-agents: Use shutdown immediate in oracledb.sh
    (use_shutdown_immediate_in_oracledb_sh.patch)
    Resolves: rhbz#633992
  - rgmanager: Add path to rhev-check.sh
    (add_path_to_rhev_check_sh.patch)
    Resolves: rhbz#634225
  - rgmanager: Make clustat report correct version
    (make_clustat_report_correct_version.patch)
    Resolves: rhbz#654160


author: Marek Grac <mgrac@redhat.com> - 2.0.52-11
changelog:
  - resource-agents: Listen line in generated httpd.conf incorrect
    (resource-agents-Remove-netmask-from-IP-address-when.patch)
    Resolves: rhbz#675739
  - resource-agents: Disable updates to static routes by RHCS IP tooling
    (resource-agents-Add-option-disable_rdisc-to-ip.sh.patch)
    Resolves: rhbz#620700


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-10.1
changelog:
  - rgmanager: Fix nofailback when service is in 'starting' state
    (fix_nofailback_when_service_is_in_starting_state.patch)
    Resolves: rhbz#669440


author: Marek Grac <mgrac@redhat.com> - 2.0.52-10
changelog:
  - resource-agents: Problem with whitespace in mysql resource name
    (resource_agents_fix_whitespace_in_names.patch)
    Resolves: rhbz#632704


author: Lon Hohberger <lhh@redhat.com> - Version: 2.0.52-9
changelog:
  - resource-agents: Fix migrateuriopt setting
    (resource_agents_fix_migrateuriopt_setting.patch)
    Resolves: rhbz#659477


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-8
changelog:
  - rgmanager: Do hard shut down if CMAN dies
    (do_hard_shut_down_if_cman_dies.patch)
    rgmanager: Work around lockspace release hang
    (work_around_lockspace_release_hang.patch)
    Resolves: rhbz#639961
  - rgmanager: Fix CIFS mount handling in netfs.sh
    (fix_cifs_mount_handling_in_netfs_sh.patch)
    Resolves: rhbz#640676


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-7
changelog:
  - rgmanager: Add multi-instance Oracle database agents
    (add_multi_instance_oracle_database_agents.patch)
    Resolves: rhbz#629208


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.18
changelog:
  - rgmanager: tomcat-5 can't start properly
    (tomcat_5_can_t_start_properly.patch)
    Resolves: rhbz#591003


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.17
changelog:
  - halvm: lvm agent incorrectly reports vg is in volume_list
    (lvm_agent_incorrectly_reports_vg_is_in_volume_list.patch)
    Resolves: rhbz#506587
  - rgmanager: Add non-critical flag to resources
    (rgmanager_add_non_critical_flag_to_resources.patch)
    rgmanager: Add non-critical base behavior
    (rgmanager_add_non_critical_base_behavior.patch)
    rgmanager: Header cleanup
    (rgmanager_header_cleanup.patch)
    rgmanager: Use rg_strings.c for flags
    (rgmanager_use_rg_strings_c_for_flags.patch)
    rgmanager: Present all flags in clustat output
    (rgmanager_present_all_flags_in_clustat_output.patch)
    rgmanager: Mark non-critical resources disabled
    (rgmanager_mark_non_critical_resources_disabled.patch)
    rgmanager: Add convalesce operation
    (rgmanager_add_convalesce_operation.patch)
    rgmanager: Allow restart,disable recovery policy
    (rgmanager_allow_restart,disable_recovery_policy.patch)
    rgmanager: Fix handling of independent subtrees
    (rgmanager_fix_handling_of_independent_subtrees.patch)
    rgmanager: Do not fail service if non-critical resources fail to stop
    (rgmanager_do_not_fail_service_if_non_critical_resources_fail_to_stop.patch)
    rgmanager: Support convalesce w/ central_processing
    (rgmanager_support_convalesce_w_central_processing.patch)
    rgmanager: Add -c option to man page & clusvcadm -h
    (rgmanager_add_c_option_to_man_page_clusvcadm_h.patch)
    rgmanager: Add independent subtree restart thresholds
    (rgmanager_add_independent_subtree_restart_thresholds.patch)
    rgmanager: clean up independent subtree restart handling
    (rgmanager_clean_up_independent_subtree_restart_handling.patch)
    rgmanager: Fix corner case in critical/non-critical handling
    (rgmanager_fix_corner_case_in_critical_non_critical_handling.patch)
    Resolves: rhbz#605733
  - resource-agents: Support ext4 in fs.sh
    (support_ext4_in_fs_sh.patch)
    Resolves: rhbz#636550


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.16
changelog:
  - rgmanager: Retry when config is out of sync
    (retry_when_config_is_out_of_sync.patch)
    Resolves: rhbz#568126


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.15
changelog:
  - rgmanager: Honor restricted FDs during migrations
    (honor_restricted_fds_during_migrations.patch)
    Resolves: rhbz#592380
  - rgmanager: Fix clustat return code
    (fix_clustat_return_code.patch)
    Resolves: rhbz#620730


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.13
changelog:
  - resource-agents: Fix samba netbios name
    (fix_samba_netbios_name.patch)
    Resolves: rhbz#531098
  - resource-agents: Fix vxfs support
    (fix_vxfs_support.patch)
    Resolves: rhbz#531843
  - rgmanager: Allow exit while waiting for cman
    (allow_exit_while_waiting_for_cman.patch)
    Resolves: rhbz#545229
  - rgmanager: Document failover domains
    (document_failover_domains.patch)
    Resolves: rhbz#557562
  - resource-agents: SAPDatabase: remove $TEMPFILE
    (sapdatabase_remove_tempfile.patch)
    Resolves: rhbz#565363
  - rgmanager: Kill processes correctly w/ force_unmount
    (kill_processes_correctly_w_force_unmount.patch)
    Resolves: rhbz#573705
  - HA LVM: Use CLVM with local machine kernel targets
    (use_clvm_with_local_machine_kernel_targets_bz_585229.patch)
    Resolves: rhbz#585229 rhbz#509368 rhbz#583769 rhbz#572311
  - resource-agents: Remove nfs service temp directories
    (remove_nfs_service_temp_directories.patch)
    Resolves: rhbz#595455
  - resource-agents: Fix migration mapping behavior w/ virsh
    (fix_migration_mapping_behavior_w_virsh.patch)
    Resolves: rhbz#596016


author: Marek Grac <mgrac@redhat.com> - 2.0.52-6.11
changelog:
  - postgres-8 will fail to stop gracefully if there are active
    clients connected
  - Resource agent for psql does not work correctly with netmask
  - Resolves: rhbz#587735 rhbz#614456


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.10
changelog:
  - Fix start timeout if status_program takes a long time
  - Use sysrq-b to reboot to work around a failed reboot() syscall
  - Resolves: rhbz#583788 rhbz#608397


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-6.2
changelog:
  - Add status_program attribute to vm.sh
  - Make status check tolerances user configurable and timing work
    correctly
  - Resolves: rhbz#583788


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-5
changelog:
  - Make relocate-to-offline host consistent with other relocation
    behaviors
  - Add isAlive error reporting for file system agents
  - Resolves: rhbz#562237 rhbz#536157


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.33
changelog:
  - Make VF timeouts scale with totem token timeout
  - Revert requires: line for installation in virtual machines.
  - Resolves: rhbz#548133 rhbz#547752


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.31
changelog:
  - Fix fs.sh bind mount handling
  - Add missing requires: line for libvirt 0.6.3
  - Resolves: rhbz#526286 rhbz#547752


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.27
changelog:
  - Add debugging information to dumps generated by rgmanager
  - Fix migration failure handling
  - Resolves: rhbz#512052 rhbz#499835


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.21
changelog:
  - Fix problem in ip.sh where it was not honoring monitor_link
    during startup
  - Resolves: rhbz#532756


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.15
changelog:
  - Fix problem causing rgmanager to stick after a node dies
    and rejoins, blocking configuration updates and other events
  - Resolves: rhbz#527777


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.14
changelog:
  - Fix problem causing service to get stuck in 'recovering' state
    when using central_processing
  - Resolves: rhbz#530409


author: Lon Hohberger <lhh@redhat.com> - 2.0.52-1.1
changelog:
  - Fix issue causing unmounting of cluster file systems while in 
  use during a configuration change.
  - Resolves: rhbz#506094


author: Chris Feist <cfeist@redhat.com> - 2.0.52-1
changelog:
  - When vm.sh does a status check and gets 'no state' it is now treated as a
    running state.
  - Resolves: rhb#514044


author: Chris Feist <cfeist@redhat.com> - 2.0.51-1
changelog:
  - In some cases virtual machines will be restarted after a successful migration
    when the cluster configuration is updated.
  - Resolves: rhbz#505340


author: Chris Feist <cfeist@redhat.com> - 2.0.50-1
changelog:
  - Extra checks from the oracle agents have been removed.
  - Several fixes to prevent DOS attacks through insecure use of /tmp/ files have
    been implemented.
  - vm.sh now uses libvirt
  - Users can now define an explicit service processing order when
    central_processing is enabled
  - Resolves: rhbz#470917 rhbz#412911 rhbz#468691 rhbz#492828


author: Chris Feist <cfeist@redhat.com> - 2.0.49-1
changelog:
  - Rgmanger now checks to see if it has been killed by the OOM killer and if
    so, reboots the node.
  - Resolves: rhbz#488072


author: Chris Feist <cfeist@redhat.com> - 2.0.48-1
changelog:
  - clulog now accepts '-' as the first character in messages.
  - If expire_time is 0 max_restarts is no longer ignored.
  - SAP scripts have been updated.
  - Empty PID files no longer cause resource start failures.
  - Recovery policy of type restart now works properly when using a resource
    based on ra-skelet.sh
  - startup_wait option has been added to the mysql resource agent.
  - samba.sh now kills the pid listed in the proper pid file.
  - Handling of '-F' has been improved to fix issues with rgmanager crashing if
    no members of a restricted failover domain are online and rgmanager failing
    to correctly restart service is they fail on the first node.
  - Enabled ability to prioritize services.
  - It is now possible to cap the number of simultaneious status checks to
    prevent load spikes.
  - Enabling a frozen service no longer fails and leaves the service in a failed
    state.
  - Forking and cloning during status checks has been optimized to reduce load
    spikes.
  - rg_test no longers hangs when running against a cluster due to the removal
    of an 8MB memory cap.
  - Resolves: rhbz#471431 rhbz#475826 rhbz#474444 rhbz#449394 rhbz#481058 rhbz#483093 rhbz#486711 rhbz#486717 rhbz#482858 rhbz#487598 rhbz#488714 rhbz#250718 rhbz#490455


author: Chris Feist <cfeist@redhat.com> - 2.0.46-1
changelog:
  - postgres-8.sh now uses 'su' instead of 'sudo' allowing the resource agent to
    run in the background.
  - Resolves: rhbz#462910


author: Chris Feist <cfeist@redhat.com> - 2.0.42-1
changelog:
  - rgmanager can now resolve hostnames to IP addresses and back when checking
    NFS clients.
  - Caching has been added in services to increase performance with a large
    number of individual mounters.
  - Resolves: rhbz#455324


author: Chris Feist <cfeist@redhat.com> - 2.0.40-1
changelog:
  - Parameter added for mapping cluster node name to xen migration
    target hostname.
  - Add support for service freeze/unfreeze.
  - rgmanager now detects restricted failover domain crashes.
  - Fix bugs when using rgmanager with IPv6.
  - rgmanager now waits for fence domain join to complete on startup.
  - clusvcadm man page fixes.
  - Resolves: rhbz#453429 rhbz#448046 rhbz#435466 rhbz#459582 rhbz#460032 rhbz#459754


author: Chris Feist <cfeist@redhat.com> - 2.0.39-1
changelog:
  - rgmanager no longer erroneously removes the wrong address when the IP
    address matches the broadcast address of the interface.
  - rgmanager now properly checks pbond links (used with Xen).
  - Resources with names that include spaces are now properly handled.
  - HA LVM now works properly on ia64 architectures.
  - Symlinks in mount points no longer cause failures.
  - rgmanager now properly sets the close on exec bit for its sockets (fixes
    SELinux issues)
  - Non-ethernet bonding slaves now work properly.
  - The LVM script now provides sufficient parameter descriptions.
  - Machines can now fence themselves if they cannot deactivate their logical
    volumes.
  - The LVM script no longer removes tags from all VGs.
  - Resolves: rhbz#453000 rhbz#451654 rhbz#445662 rhbz#446260 rhbz#441582 rhbz#433313 rhbz#331661 rhbz#443660 rhbz#431713 rhbz#242798 rhbz#438816


author: Chris Feist <cfeist@redhat.com> - 2.0.38-1
changelog:
  - Leaving out the VG name paramater to 'vgchange --deltag' no longer
    causes the tag to be removed from all VGs.
  - Resolves: rhbz#438816


author: Chris Feist <cfeist@redhat.com> - 2.0.37-1
changelog:
  - A bug was fixed which caused incorrect return codes during service stop
    operations.
  - Resolves: rhbz#432998


author: Chris Feist <cfeist@redhat.com> - 2.0.34-1
changelog:
  - Extraneous errors in during HA lvm operations have been fixed
  - Oracle 10g Release 2 resource agent is now included
  - Resolves: rhbz#428346 rhbz#349571


author: Chris Feist <cfeist@redhat.com> - 2.0.33-1
changelog:
  - Samba shares may now be mounted from the netfs resource agent
  - clulog now honors rgmanager log levels
  - Fixed a crash on restart bug
  - Default migration policy is now live (from paused)
  - Restart counters have been implemented
  - Stopping a service using a shared GFS resource no longer umounts GFS if
    other services are using it
  - HA LVM now allows multiple LVs/VGs as long as they move together
  - Resolves: rhbz#289501 rhbz#303981 rhbz#345871 rhbz#247139 rhbz#254111 rhbz#427378 rhbz#428448


author: Chris Feist <cfeist@redhat.com> - 2.0.32-1
changelog:
  - Mounting samba shares are now supported.
  - clulog now honors cluster configuration specification of log levels in
    all cases.
  - clusvcadm man page has been updated
  - Default virtual machine migration is now live (-l)
  - It is now possible to fail over a service have a specified number of restarts
  - rgmanager no longer umounts shared gfs partitions when it is used by other
    services
  - Resolves: rhbz#250681 rhbz#289501 rhbz#303981 rhbz#324151 rhbz#345871 rhbz#400211 rhbz#254111


author: Chris Feist <cfeist@redhat.com> - 2.0.31-1
changelog:
  - Failed resources and their dependencies are restarted instead of the whole
    service
  - Resolves: rhbz#229650


author: Chris Feist <cfeist@redhat.com> - 2.0.29-1
changelog:
  - Virtual machines are no longer restarted when adding as a managed service
  - Made rgmanager compatible with new libdlm
  - Fixed an error which would cause a node to shutdown if you shutdown while
    processing a relocation request
  - A deadlock was fixed when doing lots of service relocations
  - Resolves: rhbz#248727 rhbz#249758 rhbz#247291 rhbz#249314


author: Ray Strode <rstrode@redhat.com> - 3.0-3
changelog:
  - use long instead of CARD32 to XChangeProperty to fix
    unaligned access problem on ia64 (bug 215027)


author: David Malcolm <dmalcolm@redhat.com> - 2.0.13-6.fc5
changelog:
  - Regenerate patch 18 with a fix for a crash in the backup conduit (would crash whenever no modifications had occurred since the last sync)


author: David Malcolm <dmalcolm@redhat.com> - 2.0.13-5.fc5
changelog:
  - Fixed gnome-pilot-2.0.12-move-conduits-autotools.patch to set GNOME_PILOT_CONDUIT_SEARCH_PATH to libdir/gnome-pilot/conduits
    rather than share/gnome-pilot/conduits; should be able to find conduits now.
  - Finished removing test conduit


author: David Malcolm <dmalcolm@redhat.com> - 2.0.13-4.fc5
changelog:
  - Introduce pilot-link-version macro; use to bump version to 1:0.12.0-0.pre2.0
  - Update gnome-pilot-2.0.12-port-to-pilot-link-0.12.patch to use version by Mark G Adams (#161824; patch 11)
    In addition to the correct port to 0.12, this contains three patches in GNOME bugzilla bug 274032 (error handling, not closing socket on connection, fixed DB reading loop)
  - Renabled backup conduit (was patch 12), applying two patches by Mark G Adams (#161799; patch 18 and patch 19)
  - Applied patch by Mark G Adams to fix some issues identified using valgrind in the backup conduit (gnome bug 209130, patch 17)
  - Applied patch by Mark G Adams to fix some cleanup of XML handling (gnome bug 309077, patch 16)
  - Patched to fix a missing #include <pi-error.h> (patch 20)
  - Remove test conduit


author: David Malcolm <dmalcolm@redhat.com> - 2.0.13-2
changelog:
  - move .desktop file from /usr/share/control-center-2.0/capplets to 
    /usr/share/applications (#149228)


author: David Malcolm <dmalcolm@redhat.com> - 2.0.13-1
changelog:
  - 2.0.13
  - removed these patches (now upstream)
    - fix_warnings (#114281)
    - fix_desktop (added in 2.0.12-5)
    - libtool ( linkage of gpilotd)


author: David Malcolm <dmalcolm@redhat.com> - 2.0.12-9
changelog:
  - fixed missing $RPM_BUILD_ROOT in move of conduits files; do it in install stanza instead of build
  - include the version in build root


author: David Malcolm <dmalcolm@redhat.com> - 2.0.12-7
changelog:
  - move conduits file from /usr/share/gnome-pilot/conduits to /usr/LIB_DIR/gnome-pilot/conduits (bz #135304)
  - initial attempt at porting to pilot-link 0.12 API
  - disabled backup conduit for now


author: David Malcolm <dmalcolm@redhat.com> - 2.0.12-1
changelog:
  - Update from 2.0.11 to 2.0.12
  - Removed patch to fix bx #131560; this is now in the upstream source


author: David Malcolm <dmalcolm@redhat.com> - 2.0.11-1
changelog:
  - updated from 2.0.10 to 2.0.11
  - added the new XML device information file to the package (which replaces a hardcoded array in the code)
  - removed patch that added Treo 600 to that array; the Treo 600 is in the XML file
  - removed patch for gcc 3.4 support: a version of this is now in the upstream tarball


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - call scrollkeeper update in %post (#111159)
  - prereq scrollkeeper and GConf2
  - -devel should require libgnomeui-devel (#111160)


author: Jeremy Katz <katzj@redhat.com> 2.0.6-1
changelog:
  - update to 2.0.6
  - drop all patches, unneeded with 2.0 (or will need redoing if not)
  - fix file lists
  - update build requires to match what's in configure.in


author: Jeremy Katz <katzj@redhat.com> 0.1.65-10
changelog:
  - make default synctype for the pilot apply (#71104)
  - add an epoch to the pilot-link requirement (#74575)
  - fix applying settings and the try button from the previous patch


author: Jeremy Katz <katzj@redhat.com> 0.1.65-8
changelog:
  - don't use a relative symlink for the desktop file (#72911)
  - include control center desktop files so that capplets work (#71852)


author: Than Ngo <than@redhat.com> 1.5-20
changelog:
  - added missing Buildprereq: XFree86-devel (bug #110601, #109692, #110735)
  - fixed arguments in scrollbar (bug #110766)


author: Bernhard Rosenkraenzer <bero@redhat.de>
changelog:
  - Restore Xaw3d 1.5 - the addition of the backward compatibility library
    killed the current one.
  - get rid of the CDEBUGFLAGS="" hack, the current gcc fixes it


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - take care of the old location of the Xaw3d includes in case that one exist
  - updated Prereq: field


author: Jon Masters <jcm@redhat.com> - 8.0.45-28
changelog:
  - Remove dependency on /lib/firmware in Driver Update packages. Those who
    need to ship firmware files should use an override filelist instead.
  - Resolves: #252188.


author: Jon Masters <jcm@redhat.com> - 8.0.45-26
changelog:
  - Fix kernel_module_package -v/-r macros.
  - Resolves: #252188.
  - Fix handling of zero sized JAR files.
  - Resolves: #269481.


author: Jon Masters <jcm@redhat.com> - 8.0.45-24
changelog:
  - Fix use of TMPDIR to JTMPDIR in order to avoid conflict with mktemp use.
  - Resolves: #244899.
  - Set PKG_CONFIG_PATH in %__pre_build.
  - Resolves: #251922.


author: Elliot Lee <sopwith@redhat.com> 8.0.33-1
changelog:
  - Change -D to -Wp,-D to make java happy
  - Add -D_FORTIFY_SOURCE=2 to global cflags (as per Jakub & Arjan's request)


author: Jens Petersen <petersen@redhat.com> - 8.0.26-1
changelog:
  - preserve the vendor field when VENDOR not set
  - put VENDOR in the final i386-libc line, not the tentative one


author: Jens Petersen <petersen@redhat.com> - 8.0.25-1
changelog:
  - update config.{guess,sub} to 2003-06-17
  - define VENDOR to be redhat only when /etc/redhat-release present
    [suggested by jbj]
  - put VENDOR in vendor field in our config.guess file for
    ia64, ppc, ppc64, s390, s390x, x86_64 and elf32-i386 Linux
  - drop the --host, --build, --target and --program-prefix configure options
    from %configure, since this causes far too many problems


author: Jens Petersen <petersen@redhat.com> - 8.0.22-2
changelog:
  - add config.guess and config.sub (2003-02-22) with s390 patch on config.sub
  - make %configure use them


author: Phil Knirsch <pknirsch@redhat.com> 8.0.3-2
changelog:
  - Added fix for outdated config.[sub|guess] files in 
    CFLAGS="${CFLAGS:--O2 -g -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=i686-redhat-linux-gnu --host=i686-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info section


author: Alexander Larsson <alexl@redhat.com> 8.0.1
changelog:
  - Add debug package support to 
      
      
      
      /usr/lib/rpm/redhat/brp-compress 
      /usr/lib/rpm/redhat/brp-strip /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump 
      /usr/lib/rpm/brp-python-bytecompile 
      /usr/lib/rpm/redhat/brp-java-repack-jars


author: Jens Petersen <petersen@redhat.com> 7.3.92-4
changelog:
  - fix %configure targeting for autoconf-2.5x (#58468)
  - include ~/.rpmmacros in macrofiles file path again


author: Havoc Pennington <hp@redhat.com>
changelog:
  - require gconf 1.2.0, rebuild with that
  - use desktop-file-install for .desktop file
  - include .desktop file and pixmaps in file list


author: Mike A. Harris <mharris@redhat.com> 1.0.2-3
changelog:
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Added "Requires: xorg-x11-proto-devel" to devel for dmx.pc
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libdmx to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Thomas Fitzsimmons <fitzsim@redhat.com> - 0:1.7.3-1jpp.1.el5
changelog:
  - Import version 0:1.7.3-1jpp from jpackage.org.
  - Change release numbering format to Xjpp.Y.el5.
  - Resolves: rhbz#218936


author: Fernando Nasser <fnasser@jpackage.org> 0:1.7.1-1jpp
changelog:
  - Add new scripts from Deepak Bhole
  - Add documentation from Jason Corley
  - Add XLT file shared by maven2 packages


author: Nicolas Mailhot <nim at jpackage.org> - 0:1.6.3-1jpp
changelog:
  - prefer full JVM to JRE when not specified (my bad, sorry)
  - remove LICENSE.txt as it does not seem to exist in the jpp16 branch anymore


author: Nicolas Mailhot <nim at jpackage.org> - 0:1.6.2-1jpp
changelog:
  - Happy new year jpackagers!
  - No longer define JAVA_HOME in default shipped java.conf (me)
  - Search if $JVM_ROOT/jre or $JVM_ROOT/java exist in functions if JAVA_HOME is
    not defined in java.conf (me)
  - Source ~/.java/java.conf in addition to /etc/java/java.conf in functions
    (me)
  - Make find-jar use the same error code as build-classpath (Joe Wortmann)
    (note however find-jar was never intended to use directly in scripts, it's
     a low-level way to test the search engine)
  - Change macros slightly so they no longer wreak havoc on x86_64 systems
    (Thomas Fitzsimmons for Red Hat)
    This is probably only a short-term fix since we've yet to decide how to
    handle real x86_64 JVMs cleanly.


author: Robert Ottenhag <support@bea.com> - 0:1.6.2-1jpp
changelog:
  - Reapply all updates from 1.5.40-1jpp o 1.5.42-1jpp
    + Add support for splitting the installation of Java VMs/SDK/JREs 
      according to FHS 2.3 in its architecture dependent, architecture
      independent, and configuration parts. Added new macros and dirs
      - %{_jvmlibdir}, defined as %{_libdir}/jvm, equal to %{_jvmdir},
      - %{_jvmdatadir}, defined as %{_datadir}/jvm
      - %{_jvmsysconfdir}, defined as %{_sysconfdir}/jvm
    + Add support for splitting the installation of Java VMs/SDK/JREs 
      in its common architecture dependent, architecture
      independent, and configuration parts. Added new macros and dirs
      - %{_jvmcommonlibdir}, defined as %{_libdir}/jvm-commmon
      - %{_jvmcommondatadir}, defined as %{_datadir}/jvm-commmon
      - %{_jvmcommonsysconfdir}, defined as %{_sysconfdir}/jvm-commmon
    + Ensure that a global systemPrefs database used by
      java.util.prefs.FileSystemPreferences exists at
      /etc/.java/.systemPrefs, or create an empty one if not, and
      symlink to it from %{_jvmcommonsysconfdir}/java/jre/systemprefs.


author: Ville Skyttä <scop at jpackage.org> - 0:1.6.1-1jpp
changelog:
  - java-functions (set_jvm_dirs): try "java -fullversion" before
    "java -version" for performance, improve regexps, use sed from $PATH.
  - Include correct specfile in tarball.


author: Ville Skyttä <scop at jpackage.org> - 0:1.6.0-1jpp
changelog:
  - Start preparing for JPackage 1.6:
    - License change: jpackage-utils >= 1.6.0 is available under the (BSD-like)
      JPackage License.  See included LICENSE.txt.
    - Remove support for Java < 1.4 (dirs only for now).
    - Remove java_home.list and support for it.
  - Add support for installing macros.jpackage into Asianux's rpm config,
    thanks to Robert Ottenhag for the info.


author: Ville Skyttä <scop at jpackage.org> - 0:1.5.38-1jpp
changelog:
  - Update java_home.list with Sun's default 1.5.0beta2 location.
  - Nuke extra copy of java.conf from tarball.


author: Nicolas Mailhot <Nicolas.Mailhot at laPoste.net> - 0:1.5.37-1jpp
changelog:
  - add the --preserve-naming switch to build-jar-repository, and document it
    (following a discussion with Chip Turner)


author: Ville Skyttä <scop at jpackage.org> - 0:1.5.36-1jpp
changelog:
  - Fix bootstrap problem by ensuring that build time macro expansion for
    %{_sysconfdir}/java.conf uses macros defined in this package and does not
    rely on the macros being already defined.
  - Include correct spec file in tarball.


author: Ville Skyttä <scop at jpackage.org> - 0:1.5.32-1jpp
changelog:
  - Fix java-functions location in diff-jars.
  - Add (X)Emacs mode cookies to java.conf and java-functions.
  - Micro-performance improvement to set_javacmd.
  - Insert macros.jpackage before anything starting with "~/" in rpmrc's.
  - Include example httpd.conf snippet for javadocs.


author: Ville Skyttä <scop at jpackage.org> - 0:1.5.26-1jpp
changelog:
  - Add %{_jvmprivdir} (== %{_libdir}/jvm-private), a directory for
    JVM-private stuff (eg. JCE policy jars).
  - Update java_home.list with Sun's default 1.4.2_01 location.


author: Nicolas Mailhot <Nicolas.Mailhot at laPoste.net> 0:1.5.22-1jpp
changelog:
  - more correct java version detection regexp, courtesy of Scott Brickner
  - allow creation of harlink/copy jar repositories since tomcat4 seems to need 
    this (reported by Greg Barton)


author: Nicolas Mailhot <Nicolas.Mailhot at laPoste.net> 0:1.5.21-1jpp
changelog:
  - fix a bug in jar repository handling
  - remove unused APPDIR in jar resolution
  - add doc for jpackage 1.5 policy


author: Nicolas Mailhot <Nicolas.Mailhot at laPoste.net> 0:1.5.19-1jpp
changelog:
  - fix new jar repository scripts (more corner cases)
  - create symlinks for not-found extensions to allow a later repository rebuild
  - create symlinks as [extension].jar, for example [jsse][jcert].jar
  - allow both extension split and collapsing
    (one jar -> one directory of jars or the other way round)


author: David Walluck <david@anti-microsoft.org> 0:1.5.16-1jpp
changelog:
  - %jpackage_script macro fix
  - add %doc to file list
  - add %config(noreplace) to jpackage-release in file list to shut up rpmlint


author: David Walluck <david@anti-microsoft.org> 0:1.5.13-3jpp
changelog:
  - don't use quotes around the 'find' command in %postun and %triggerin
  - don't add a 'macrofiles:' line in %triggerin to rpmrc if one isn't
    already there


author: Nicolas Mailhot <Nicolas.Mailhot at laPoste.net> 0:1.5.12-1jpp
changelog:
  - remove build-classpath dependency on David's stuff since it fails horribly
    when people actually use it
  - try to actually fix triggers


author: David Walluck <david@anti-microsoft.org> 1.5.10-1jpp
changelog:
  - back to using %{_libdir}/rpm/rpmrc for macros.jpackage
  - add %{_javadir}--1.4.2 and %{_jnidir}-1.4.2 directories
  - update package description
  - add JAVACMD_OPTS to java.conf
  - use new external java.conf
  - update build-classpath and java-functions to support directories in
    CLASSPATH


author: Nicolas Mailhot <Nicolas.Mailhot@jpackage.org> 1.5.4-3jpp
changelog:
  - extract jar resolving logic from classpath builder
  - hopefully integrate classpath builder in set_classpath macro


author: David Walluck <david@anti-microsoft.org> 1.4.8-1jpp
changelog:
  - better installation of macros
  - update %description to list all files currently included in this package
  - jpackage-release in %{_sysconfdir}, not /etc (I hope this is more
    correct)


author: David Walluck <david@anti-microsoft.org> 1.4.7-1jpp
changelog:
  - fix sed in %jpackage_script when paths to jars contain '/'
  - fix typo in macros documentation
  - add jpackage-policy
  - add jpackage-release


author: David Walluck <david@anti-microsoft.org> 1.4.5-1jpp
changelog:
  - add macros.jpackage (DO NOT attempt to use this until we figure something
    out, but I would still like to get some feedback about how it looks so far)


author: David Walluck <david@anti-microsoft.org> 1.4.3-1jpp
changelog:
  - java-functions changes:
    + set_jvm: look for javac first to avoid erroneously setting
      JAVA_HOME to the location of the jre unless we have to
    + set_jvm: follow symlinks to avoid erroneously setting JAVA_HOME to
      /usr/bin
    + set_jvm: export JAVA_HOME
  - changed to use install instead of mkdir and cp
  - remove %attr and rely on install to set the permissions instead


author: Ville Skyttä <scop at jpackage.org> - 1.4.2-1jpp
changelog:
  - java-functions changes:
    + Prevent non-success exit code from "which" in set_jvm, it can now
      be used when building RPMs.
    + Use set_jvm in set_javacmd.
    + Use set_javacmd and $JAVACMD in run.
  - Fix Group tag.


author: Ville Skyttä <scop at jpackage.org> - 1.4-1jpp
changelog:
  - Fix diff-jars when diffing 2 jars with same basename (#635202).
  - Add IBM's 1.4 default RPM location to jvm.list.


author: Nicolas Mailhot <nmailhot@users.sourceforge.net> 1.2-1jpp
changelog:
  Add some stuff to please jakarta ant developpers :
  - OSX java home
  - new function set_javacmd with AIX hack included


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.1-1jpp
changelog:
  - java-functions: centralized configuration
  - java-functions: jvm list lookup
  - diff-jars: fixed typo
  - diff-jars: used /tmp for files
  - corrected changelog


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p1-15.el5
changelog:
  - revert init script priority (#470945, #689636)
  - drop tentative patch (#489835)
  - move restorecon call to %posttrans


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p1-13.el5
changelog:
  - don't crash with more than 512 local addresses (#661934)
  - add -I option (#528799)
  - fix -L option to not require argument (#460434)
  - move ntpd and ntpdate to /sbin and start earlier on boot (#470945, #689636)
  - increase memlock limit (#575874)
  - ignore tentative addresses (#489835)
  - print synchronization distance instead of dispersion in ntpstat (#679034)
  - fix typos in ntpq and ntp-keygen man pages (#664524, #664525)
  - clarify ntpd -q description (#591838)
  - don't verify ntp.conf (#481151)
  - replace Prereq tag


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p1-11.el5
changelog:
  - fix buffer overflow when parsing Autokey association message 
    (#500784, CVE-2009-1252)
  - fix buffer overflow in ntpq (#500784, CVE-2009-0159)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p1-9.el5
changelog:
  - fix selecting multicast interface (#444106)
  - disable kernel discipline when -x option is used (#431729)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p1-8.el5
changelog:
  - avoid use of uninitialized floating-point values in clock_select (#250838)
  - generate man pages from html source, include config man pages (#307271)
  - add note about paths and exit codes to ntpd man page (#242925, #246568)
  - add section about exit codes to ntpd man page (#319591)
  - always return 0 in scriptlets


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p1-6.el5
changelog:
  - fix broadcast client to accept broadcasts on 255.255.255.255 (#226958)
  - compile with crypto support on 64bit architectures (#239580)
  - add ncurses-devel to buildrequires (#239580)
  - exit with nonzero code if ntpd -q did not set clock (#240134)
  - fix return codes in init script (#240118)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2-3
changelog:
  - fix manycast support in ntpdate (#194329)
  - reply to manycast requests with null refid
  - enable mlockall (#195617)
  - correct threshold value in ntpdate manpage


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-14
changelog:
  - modify ntp.conf, change default restrict, remove broadcastdelay,
    use fedora.pool.ntp.org (#189667)
  - don't install drift file
  - remove unsupported options from ntptrace manpage (#137717)
  - fix default paths in manpages for ntp-keygen and ntpdate


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-12
changelog:
  - fix initscript:
    - replace -U with -u in getopts (#187003)
    - don't pass group to ntpdate -U argument and ignore -i in options (#142926)
    - set ntpconf for -c
    - remove -p 8 from ntpdate arguments
    - don't call ntpdate when step-tickers doesn't contain anything useful
      and -x isn't in options
  - fix default keyfile for ntpdate (#183196)


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-11
changelog:
  - update man pages (#153195, #162856)
  - drop C-Frame-121, vsnprintf, minusTi and loconly patch
  - prevent segfault when loopback interface is not configured (#159056)
  - spec cleanup


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-10
changelog:
  - ntpd does not submit his local clock (if there is no peer).
    ntpdate->ntpd #163862 , Patch13: ntp-stable-4.2.0a-20050816-loconly.patch


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-3
changelog:
  - A similar patch as ntp-4.0.99j-vsnprintf.patch in FEDORA CORE 4
  - (current patch is ntp-stable-4.2.0a-20050816-vsnprintf.patch)


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-2
changelog:
  - Fix fails on upgrade, if ntpd is disabled (#166773)
  - A cosmetic patch. There are some comments and braces '{' '}' added.
  - One unprintable character was converted to octal-form .
  - It can be removed anytime (conversion of the cvs-projets for C-Frame 121,
  - (auto-debug, auto-trace for cfr-printnet server).


author: Jindrich Novy <jnovy@redhat.com> 4.2.0.a.20050816-1
changelog:
  - update to the latest stable 4.2.0.a.20050816
  - drop upstreamed .gcc4, .vsnprintf patches
  - remove obsolete .autofoo patch
  - make patch numbering less chaotic
  - don't package backup for .droproot patch


author: Harald Hoyer <harald@redhat.com> - 4.2.0.a.20040617-4
changelog:
  - removed firewall hole punching from the initscript; rely on iptables
    ESTABLISHED,RELATED or manual firewall configuration


author: Harald Hoyer <harald@redhat.de> 4.1.1b-1
changelog:
  - updated to version 4.1.1b
  - improved initscript - use ntpdate on -x
  - improved initscript - open firewall only for timeservers
  - ntp-4.1.1a-adjtime.patch removed (already in source)
  - ntp-4.1.1a-mfp.patch removed (already in source)
  - ntp-4.0.99j-vsnprintf.patch removed (already in source)


author: Harald Hoyer <harald@redhat.de> 4.1.0b-4
changelog:
  - created drift with dummy value #58294
  - grep for timeservers in ntp.conf also for ntpdate #57837
  - check return value of ntpdate #58836


author: Harald Hoyer <harald@redhat.de> 4.1.0-1
changelog:
  - wow, how stupid can a man be ;).. fixed #50698 
  - updated to 4.1.0 (changes are small and in non-critical regions)


author: Harald Hoyer <harald@redhat.de>
changelog:
  - new snapshot
  - removed typos and security patch (already there)
  - commented multicastclient in config file


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Add the remote root exploit patch (based on ntp-hackers).
  - Enhance droproot patch (more documentation, etc.) <Jarno.Huuskonen@uku.fi>
  - Tweak the droproot patch to include sys/prctl.h, not linux/prctl.h
  (implicit declarations)
  - Remote groupdel commands, shouldn't be needed.
  - Removed -Wcast-qual and -Wconversion due to excessive warnings (hackish).
  - Make ntp compilable with both glibc 2.1 and 2.2.x (very dirty hack)
  - Add %{_sysconfdir}/sysconfig/ntpd which drops root privs by default


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - require/buildprereq libcap/libcap-devel
  - use 'ntp' user, tune the pre/post scripts, %files
  - add $OPTIONS to the init script


author: Preston Brown <pbrown@redhat.com>
changelog:
  - allow comments in %{_sysconfdir}/ntp/step-tickers file (#28786).
  - need patch0 (glibc patch) on ia64 too


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - comment out default values for keys, warn about starting with -A (#19316).
  - take out -A from ntpd startup as well.
  - update to 4.0.99k.


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-7
changelog:
  - fixed sha1 on 2gb boundary (patch from upstream) (#189492)
  - enable compilation of updated assembler code on IA64 (#180091)
  - correct verification of CA certs in SSL (#201005)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-6
changelog:
  - fix a few rpmlint warnings
  - fix build if 'rand' or 'passwd' in buildroot path (#178782)
  - make libica build in brew


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-4
changelog:
  - fix CAN-2005-2969 - remove SSL_OP_MSIE_SSLV2_RSA_PADDING which
    disables the countermeasure against man in the middle attack in SSLv2
    (#169863)
  - more fixes for constant time/memory access for DSA signature algorithm
  - updated ICA engine patch


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-3
changelog:
  - fix CAN-2005-0109 - use constant time/memory access mod_exp
    so bits of private key aren't leaked by cache eviction (#157631)


author: Mike A. Harris <mharris@redhat.com> 12.3.1.0-1
changelog:
  - Initial spec file for vmmouse input driver, using xorg-x11-drv-mouse.spec
    version 1.0.3.1-1 as a template.


author: Trond Eivind Glomsrød <teg@redhat.com> 0.4-1
changelog:
  - s/Copyright/License/
  - Minor description change
  - fix use of %doc
  - Add full location of source tarball


author: Ned T. Crigler <crigler@hell-city.org> 0.4
changelog:
  - Portability updates thanks to sourceforge's compile farm. dtach should now
    work on: FreeBSD, Debian/alpha, Debian/PPC, Debian/sparc, Debian/PPC, and
    Solaris.


author: Ned T. Crigler <crigler@hell-city.org> 0.3
changelog:
  - Use getrlimit and dynamically allocate the data structures, if possible.
  - Added some more autoconf checks.
  - Initial sourceforge release.


author: Ned T. Crigler <crigler@hell-city.org>
changelog:
  - Changed the master to send a stream of text to attaching clients instead
    of sending a huge packet all the time.
  - Decreased the client <-> master packet size.
  - Changed the attach code so that it tells the master when a suspend occurs.


author: Ned T. Crigler <crigler@hell-city.org> 0.2
changelog:
  - Removed silly thinko regarding terminal settings in attach, we
    always set the terminal to raw mode now.
  - Moved redraw code into the master, which tries to be smarter when
    using ^L.
  - Moved the code that obtains the current terminal settings into main,
    preventing a race condition between the master and attach processes.
  - Rewrote argument parsing code.
  - Changed name to dtach.
  - Added a man page.


author: Isaiah Weiner <iweiner@redhat.com>
changelog:
  - Modified spec file to correct detach binary permissions
  - Modified spec file to correct detach documentation path
  - Modified spec file URL: to point to http://people.redhat.com/iweiner/detach
  - Modified spec file %clean to remove buildroot and builddir.


author: Nils Philippsen <nils@redhat.com> - 0.9.4-5
changelog:
  - correctly set current service when changing notebook pages, correct typos
    (#445185)
  - fix adding unknown and deleting services (#500424)


author: Nils Philippsen <nils@redhat.com>
changelog:
  - use correct tool name in documentation (#370461)
  - avoid tracebacks when restarting xinet services (#445185)


author: Harald Hoyer <harald@redhat.com> - 0.9.4
changelog:
  - fixed service start/stop (#218429)
  - translation update (#216558)
  - Resolves: rhbz#216558, rhbz#218429


author: Nils Philippsen <nphilipp@redhat.com> - 0.9.1
changelog:
  - don't disable Start/Stop/Restart upon reverting changes (#202722)
  - add dist tag
  - install po files (again)
  - require gettext for building
  - fix tagging for make archive
  - fix circular make dependency
  - remove duplicate message definitions


author: Florian Festi <ffesti@redhat.com>
changelog:
  - rewrote large parts of servicemethods (OO design, better handling of old/new
    settings, read headers of init scripts completely)
  - first implementation of widgets to control services (intended for tools
    configuring single services like nfs, samba, bind, ...), still missing: i18n,
    dependencies on other services (like portmap)


author: Nils Philippsen <nphilipp@redhat.com> - 0.8.26
changelog:
  - revamp getting output from external commands (#162884)
  - package /usr/bin/serviceconf symlink (#165099)


author: Nils Philippsen <nphilipp@redhat.com> 0.8.22-1
changelog:
  - fix deprecation warnings (#153052) with patch by Colin Charles
  - update the GTK+ theme icon cache on (un)install (Christopher Aillon)


author: Nils Philippsen <nphilipp@redhat.com> 0.8.21-1
changelog:
  - connect toggled signals of service/runlevel checkboxes to enable saving again
    (#151982)
  - consolidate on_optRL*_toggled
  - connect delete_event of mainWindow to ask whether things should be saved
    before quitting
  - tab -> space indentation to avoid ambiguity
  - change some typos


author: Nils Philippsen <nphilipp@redhat.com> 0.8.20-1
changelog:
  - don't read from /dev/null when restarting xinetd/services to prevent hangs
  - build toolbar in glade to avoid DeprecationWarnings (#134978)
  - dynamic, translated column titles for runlevel columns


author: Brent Fox <bfox@redhat.com> 0.8.7-1
changelog:
  - remove dependency on gnome-python2 and gnome-python2-canvas
  - try to load glade file in the cwd, if not, pull from /usr/share/
  - apply patch from bug #117277


author: Daniel J Walsh <dwalsh@redhat.com> 0.8.3-6
changelog:
  - Fix DISPLAY error handling
  - Stretch Screen size
  - Update status box after Start/Stop/Restart
  - Fix Icon error


author: Dan Walsh <dwalsh@redhat.com> 0.8.1-5
changelog:
  - Updated to use intltool and new build environment.
  - Added with pam changes for timestamp
  - New internationalization stuff


author: Bill Nottingham <notting@redhat.com>
changelog:
  - translation typos (#51774, #51776)
  - add system-config-services link
  - if we're using find_lang, don't specify the .mo files explicitly


author: Tim Powers <timp@redhat.com>
changelog:
  - gnomified
  - work around parsing languified chkconfig output so that we can get accurate information displayed


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added help doc
  - moved man page into man directory
  - added Makefile for man page
  - added man page to spec file


author: Richard W.M. Jones <rjones@redhat.com> - 1.11-2
changelog:
  - New upstream version 1.11 + patch to fix detection of IA64 Xen HVM guests.
    resolves: rhbz#707508


author: Richard W.M. Jones <rjones@redhat.com> - 1.9-1.3
changelog:
  - Import upstream version from Fedora Rawhide.
  - Fix dependencies for RHEL 5.
  - Ignore test errors caused by Python being broken.


author: Nils Philippsen <nphilipp@redhat.com> 0.26
changelog:
  - avoid traceback on startup (#177197), mark "None or built-in" string as
    translatable (patch by Frank Arnold)


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - put "Selected Device" and "Device Information" in vertical panes and increase
    the size of the "Selected Device" scrolled window a bit (#139900)


author: Mark Johnson <mjohnson@redhat.com> 3.3.1-1
changelog:
  - Initial public release
  - Moved files to /usr/share/xml
  - Added SGML catalog registration
  - Fixed catalog.xml, which gets broken by xmlcatalog
  - Composed README.fedora


author: Richard Hughes <rhughes@redhat.com> - 0.6.20-1.el5_7.1
changelog:
  - Update to 0.6.20
  - Repackage a newer version of libexif-docs
  - Convert doc files to utf-8
  - Update the license field
  - Resolves: #689614


author: Matthias Saou <matthias.saou@est.une.marmotte.net>
changelog:
  - Use %find_lang macro.
  - Add %doc files, including mandatory copy of the LGPL license.
  - Use -j2
  - Improve the descriptions


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.76-0.lvn.2
changelog:
  - Add patch to fix AMD64 build, thanks to Walter Müller (bug 175).
  - Use the "idea" optimization for x86_64 and ia64 (was sparc).
  - Run accuracy and accuracy2 in %check.


author: Warren Togami <wtogami@redhat.com> - 1:2.6.6-3
changelog:
  - enable optional spell checking if you install enchant
    because gtkspell is currently unusable (#201116)


author: Christopher Aillon <caillon@redhat.com> 1:2.4.0-1
changelog:
  - Update to 2.4.0
  - Fix simplify-to-use-gnome-open and simplify-to-use-htmlview patches
    to not conflict every time upstream modifies the urlhandler list.
  - Remove focus and tab completion patches (no longer needed)


author: Christopher Aillon <caillon@redhat.com> 1:2.0.10-3
changelog:
  - Update upstream patch to fix tab completion crash
  - Add upstream patch to fix focus crash on some window managers.


author: Mike A. Harris <mharris@redhat.com> 1:2.0.7-5
changelog:
  - Bump and rebuild for Fedora devel, to sync up with new perl
  - Remove require_autoconf conditional, and conditionalized autoconf BuildRequires


author: Mike A. Harris <mharris@redhat.com> 1:2.0.7-4
changelog:
  - Added xchat-2.0.7-simplify-to-use-gnome-open-for-default-webbrowser.patch
    and xchat-2.0.7-simplify-to-use-htmlview-for-default-webbrowser.patch to
    simplify the default URL handler menu to point only to the default system
    web browser by using gnome-open on Fedora Core 2 and later, or htmlview
    on earlier OS releases.  This is added to improve user friendliness (#82331)


author: Mike A. Harris <mharris@redhat.com> 1:2.0.7-1.FC1.0
changelog:
  - Rebuild xchat 2.0.7-3 as 2.0.7-1.FC1.0 for release as an enhancement erratum
    for Fedora Core 1.  Also fixes AMD64 64bit issues reported in bug (#114237)


author: Mike A. Harris <mharris@redhat.com> 1:2.0.7-1
changelog:
  - Updated to xchat 2.0.7
  - Removed already integrated patches, including:  xc204-fixperlui.diff,
    xchat-2.0.4-screen-position-fix.patch, xchat-2.0.4-exec-shield-GNU-stack.patch
  - Added a new rpm macro require_autoconf, which is disabled (0) by default, as
    it seems no longer necessary to run autoconf prior to ./configure, so we no
    longer need to BuildRequire autoconf 2.54 either.


author: Mike A. Harris <mharris@redhat.com> 2.0.4-4
changelog:
  - Added xchat-2.0.4-exec-shield-GNU-stack.patch from Arjan, to allow xchat to
    be be protected by exec shield if the system has exec-shield enabled.


author: Mike A. Harris <mharris@redhat.com> 2.0.4-3
changelog:
  - Added xchat-2.0.4-screen-position-fix.patch to fix problem where xchat
    doesn't remember it's screen location between invocations (#103896)


author: Mike A. Harris <mharris@redhat.com> 2.0.4-1
changelog:
  - Updated to xchat 2.0.4
  - Removed unneeded patches xc203-fixtint.diff, xc203-fix-cps.diff
  - Added upstream patch xc204-fixperlui.diff
  - Updated autoconf dependancy to version 2.54 and greater as xchat wont
    compile otherwise.  Meaning Red Hat Linux 9 or higher is needed.


author: Mike A. Harris <mharris@redhat.com> 2.0.3-2
changelog:
  - Added xc203-fix-cps.diff patch from upstream to fix cps calculation
  - TCL plugin was getting built even though we don't want it, so now we pass
    --enable-tcl or --disable-tcl explicitly, depending on with_tclplugin macro


author: Mike A. Harris <mharris@redhat.com> 2.0.3-1
changelog:
  - Updated to xchat 2.0.3
  - Dropped old patches: xc202-fixdetach.diff, xc202-fixurlg.diff,
    xchat-2.0.2-lib64-cleanup-for-python.patch
  - Added upstream patch: xc203-fixtint.diff


author: Mike A. Harris <mharris@redhat.com> 2.0.2-7
changelog:
  - Added back BuildRequires autoconf, and call autoconf prior to ./configure
    as it seems to make xchat build successfully.  Have not bothered to figure
    out why calling autoconf is needed.  Something for a rainy day.


author: Mike A. Harris <mharris@redhat.com> 2.0.2-6
changelog:
  - Removed gnome-libs BuildRequires as it is bogus now
  - Removed autoconf BuildRequires and usage, as it should be unneeded
  - Added new BuildRequires on gettext, bison >= 1.35, glib2-devel >= 2.0.3,
    gtk2-devel >= 2.0.3, /bin/sed  (#91676 - Warren Togami)
  - Removed dead patches: xchat-1.8.9-perlcrypt.patch, xchat-1.8.9-korean-fontset.patch


author: Mike A. Harris <mharris@redhat.com> 2.0.2-5
changelog:
  - Removed xchat.desktop file, as it was earlier replacedwith a patch
  - Converted xchat-2.0.2-redhat-desktop-file.patch to be UTF-8 clean now,
    instead of the various random legacy mix of encodings it was, updating
    the following: es, ko, uk, zh_TW


author: Mike A. Harris <mharris@redhat.com> 2.0.2-4
changelog:
  - Replace explicit perl package name-epoch-version Requires added in 2.0.2-3
    with a more robust and generic solution of querying perl for the archlibexp
    dir during building, and requiring it instead


author: Mike A. Harris <mharris@redhat.com> 2.0.2-1
changelog:
  - Updated to new xchat 2.0.2 based on GTK2
  - Dropped unneeded patches xchat-1.8.1-konqueror.patch,
    xchat-1.8.4-fix-USE_GNOME.patch
  - Updated xchat-2.0.2-freenode.patch to refer to Openprojects.net
  - Removed doc/xchat.sgml doc/*.html scripts-python scripts-perl from %doc
  - Added xchat-2.0.2-redhat-desktop-file.patch to patch the supplied xchat
    desktop file, instead of replacing it and trying to stay in sync
  - Added xchat-2.0.2-lib64-cleanup-for-python.patch which fixes build problems
    on lib64 archs, and replaces xchat-multilib.patch
  - Added with_tclplugin macro and default it to disabled


author: Mike A. Harris <mharris@redhat.com> 1.8.11-8
changelog:
  - Added xchat-1.8.11-nickall.patch which was written by Fabio Olive Leite,
    sent to me by Rik van Riel


author: Mike A. Harris <mharris@redhat.com> 1.8.11-6
changelog:
  - Added xchat-1.8.11-freenode.patch to rename all openprojects.net entries
    to freenode.net in the default server list.  Patch courtesy of Dan Burcaw
    from bug (#81704)


author: Mike A. Harris <mharris@redhat.com> 1.8.11-1
changelog:
  - Update to xchat 1.8.11 bugfix release, fixes various runtime crashes
  - Remove now included patches: xchat-1.8.10-urlhandler-open-in-new-tab.patch,
    xchat-1.8.10-beep-beep-beep.patch


author: Nalin Dahyabhai <nalin@redhat.com> 1.8.10-13
changelog:
  - Pick up OpenSSL configuration from pkgconfig, if available
  - Add openssl-devel and pkgconfig as buildreqs


author: Mike A. Harris <mharris@redhat.com> 1.8.10-11
changelog:
  - Added xchat-1.8.10-urlhandler-open-in-new-tab.patch to offer the option of
    opening a URL in a new tab of an existing browser window rather than a new
    window


author: Mike A. Harris <mharris@redhat.com> 1.8.10-10
changelog:
  - Added BuildRequires: python-devel to hopefully pick up a missing dep
    causing package build failure in timp's nightly builds.
  - Removed dead patches
  - Updated package summary and description to be more user friendly by
    rewording, and removing scary words like GNOME, GTK and other irrelevance


author: Mike A. Harris <mharris@redhat.com> 1.8.10-9
changelog:
  - Made sure {_sysconfdir}/X11/applnk/Internet/xchat.desktop gets packaged
  - Removed some conditional weirdness in %files list.  This may break xchat
    erratum releases on Red Hat Linux 7.x.  May need to be fixed in future.


author: Mike A. Harris <mharris@redhat.com> 1.8.10-7
changelog:
  - Added Requires line so that xchat requires the exact version of perl
    be installed, that was used to compile it, since the embedded perl
    interpreter will break, if you upgrade perl


author: Mike A. Harris <mharris@redhat.com> 1.8.10-3
changelog:
  - Added http://xchat.org/files/source/1.8/patches/xc1810fixme.diff to fix
    bug with using /ME in a /QUERY window.  (#71179)


author: Mike A. Harris <mharris@redhat.com> 1.8.10-2
changelog:
  - Updated to xchat 1.8.10 to fix a few bugs where a remote ircd could cause
    the xchat client to crash.  This is a bugfix only release.


author: Mike A. Harris <mharris@redhat.com> 1.8.9-9
changelog:
  - Enabled python scripting which was somehow disabled somewhere along the
    line by default in upstream sources, and we missed catching it. (#70816)


author: Mike A. Harris <mharris@redhat.com> 1.8.9-6
changelog:
  - updated the package description
  - Added CFLAGS and LDFLAGS export vars before configure to fix rpath problem


author: Mike A. Harris <mharris@redhat.com> 1.8.8-5
changelog:
  - Re-enabled GNOME support due to user complaints of pixmaps missing, key
    bindings, and other fairly important features no longer working.


author: Mike A. Harris <mharris@redhat.com> 1.8.8-4
changelog:
  - Disabled GNOME support since it doesn't seem too useful anyways, and forces
    all xchat users to install GNOME libs even if they use KDE. (#59626)
  - Updated URL and source lines in spec.


author: Mike A. Harris <mharris@redhat.com> 1.8.7-5
changelog:
  - Added xchat-1.8.7-use-sysconf-to-detect-cpus.patch to use glibc's sysconf()
    to detect the number of processors available.


author: Mike A. Harris <mharris@redhat.com> 1.8.7-2
changelog:
  - Updated to xchat 1.8.7
  - New release fixes security vulnerability in CTCP reply
  - Built erratum for all supported releases (1.8.7-1.62.0, 1.8.7-1.70.0,
    1.8.7-1.71.0, 1.8.7-1.72.0)
  - Removed konqueror patch as it is integrated now.


author: Mike A. Harris <mharris@redhat.com> 1.8.6-2
changelog:
  - Enabled ssl support with --enable-openssl
  - Also built releases 1.72.0, 1.71.0, 1.70.0, 1.62.0 for erratum release


author: Mike A. Harris <mharris@redhat.com> 1.8.4-1
changelog:
  - Updated to 1.8.4, now using tar.bz2
  - Removed kanjiconv-fix patch as it is integrated now
  - Added xchat-1.8.4-fix-USE_GNOME.patch to fix simple ifdef USE_GNOME typo


author: Akira TAGOH <tagoh@redhat.com> 1.8.1-2
changelog:
  - fixed check locale.
  - don't save kanji_conv.
    always check locale. however anyone can change the option from
    the settings menu.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - upgrade to 1.8.1
  - remove autoconnect patch since it's upstream
  - remove japanese patch, upstream seems to have applied
    parts of it and changelog says there's upstream support.
    (this patch was pretty huge to maintain in an SRPM anyway...)
  - put scripts-python scripts-perl in docs bug #28521
  - remove patch to include locale.h, gone upstream
  - upgrade konqueror patch


author: Havoc Pennington <hp@redhat.com>
changelog:
  - fix file list to not include absolute path "/usr/share/..."
    no idea how that ever worked at all. closes #48923


author: - Devrim GUNDUZ <devrim@commandprompt.com> 2.0.3-3
changelog:
  - Fixed zope package dependencies and macro definition, per bugzilla review (#199784)
  - Fixed zope package directory ownership, per bugzilla review (#199784)
  - Fixed cp usage for zope subpackage, per bugzilla review (#199784)


author: - Devrim GUNDUZ <devrim@commandprompt.com> 2.0.3-2
changelog:
  - Fixed 64 bit builds
  - Fixed license
  - Added Zope subpackage
  - Fixed typo in doc description
  - Added macro for zope subpackage dir


author: - Devrim GUNDUZ <devrim@commandprompt.com> 2.0.2-3
changelog:
  - Removed python dependency, per bugzilla review. (#199784)
  - Changed doc package group, per bugzilla review. (#199784)
  - Replaced dos2unix with sed, per guidelines and bugzilla review (#199784)
  - Fix changelog dates


author: Soren Sandmann <sandmann@redhat.ocm> - 0.0.13-0.32.20060818git.fc6
changelog:
  - Install the .desktop file with desktop-file-install. Add X-Red-Hat-Base to make it appear in "Preferences", rather than "More Preferences".


author: Soren Sandmann <sandmann@redhat.com>
changelog:
  - Change default plugin list to not include the plane plugin. (Bug 208448).
  - Change default keybinding for shrink to be Pause (Bug 206187).


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.29.20060817git.fc6
changelog:
  - Add restart.patch to make compiz ask the session manager to restart it
    if it crashes (bug 200280).


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.28.20060817git.fc6
changelog:
  - Change plane.patch to not do cyclical window movement in dimensions
    where the desktop has size 1 (bug 207263).


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.27.20060817git.fc6
changelog:
  - Change .plane patch to 
    (a) not set the background color to pink in the plane plugin. 
    (b) allow workspaces with horizontal sizes less then 4.


author: Soren Sandmann <sandmann@redhat.com>
changelog:
  - Run update-desktop-database and gtk-update-icon-cache in post. Add icons
    to list of packaged files. Also bump to 0.6.137 of dialog (which just makes
    directories before attempting to install to them).


author: Soren Sandmann <sandmann@redhat.com>
changelog:
  - Upgrade to 0.6.107 of the desktop-effects dialog box. Only change is
    that the new version has icons.


author: Kristian Høgsberg <krh@redhat.com> - 0.0.13-0.21.20060817git.fc6
changelog:
  - Drop gl-include-inferiors.patch now that compiz uses COW and the X
    server evicts offscreen pixmaps automatically on
    GLX_EXT_texture_from_pixmap usage.


author: Kristian Høgsberg <krh@redhat.com> - 0.0.13-0.17.20060817git.fc6
changelog:
  - Add patch from upstream to also use sync protocol for override
    redirect windows (sync-override-redirect-windows.patch).


author: Kristian Høgsberg <krh@redhat.com> - 0.0.13-0.16.20060817git.fc6
changelog:
  - Rebase to latest upstream changes which has the rest of the bindings
    rewrite.  Add resize-move-keybindings.patch to make move and resize
    bindings work like metacity.
  - Add back scale plugin.


author: Ray Strode <rstrode@redhat.com> 0.0.13-0.15.20060721git.fc5.aiglx
changelog:
  - Add Requires: gnome-session 2.15.90-2.fc6 (bug 201473)
  - unlink session file on changing wms (bug 201473)


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-fpit to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for fpit input driver generated automatically
    by my xorg-driverspecgen script.


author: Ville Skyttä <ville.skytta at iki.fi> - 1.58-1
changelog:
  - #121168
  - Update to 1.58.
  - Require perl(:MODULE_COMPAT_*).
  - Handle ParserDetails.ini parser registration.
  - BuildRequires libxml2-devel.
  - Own installed directories.


author: Petr Sabata <psabata@redhat.com> - 1:005-2
changelog:
  - RHEL-5.6 build
  - Including cpufreq-aperf from cpufrequtils-008 (Source1, Source2)
  - Makefile patch to handle cpufreq-aperf
  - Resolves: rhbz#568754


author: Matthias Saou <http://freshrpms.net/> 0.2-2
changelog:
  - Major spec file cleanup. (#155731)
  - Use %find_lang macro.
  - Add missing sysfsutils-devel build requirement.


author: Doug Ledford <dledford@redhat.com> - 1.5.3-1.el5
changelog:
  - Update to latest upstream version
  - Don't include the newly added devel stuff as it's likely only needed
    internally (and certainly not needed by anything we've supported before
    since we've never shipped it)
  - Related: bz518218


author: Hal Rosenstock <halr@voltaire.com> - 1.3.1
changelog:
  - Add link width and speed to topology file output in ibnetdiscover
  - Add support for -R(outer_list) in ibnetdiscover
  - Add script and man page for ibidsverify
  - Moved diags from bin to sbin
  - Add scripts and man pages for display on IB routers
  - Add GUID to output line for ports in ibqueryerrors.pl
  - Add ibdatacounts and ibdatacounters scripts and man pages
  - Add peer port link width and speed validation in iblinkinfo.pl
  - Display remote LID with peer port info in IBswcountlimits.pm
  - Handle peer ports at 1x that should be wider and 2.5 Gbps
    links that should be faster in ibportstate
  - Add LinkSpeed/Width components to output of ibportstate
  - Add support for IB routers 
  - Add grouping support for ISR2012 and ISR2004 in ibnetdiscover
  - Remove all uses of "/tmp" from perl scripts
  - Add switch map support for saquery -O and -U options
  - Add support for saquery -s (isSMdisabled)
  - Add name input checks to saquery (-O and -U)


author: Hal Rosenstock <halr@voltaire.com> - 1.3.0
changelog:
  - Add some extra debug information to IBswcountlimits.pm
  - Send normal output to stdout in ibtracert
  - Don't truncate NodeDescriptions containing ctl characters in ibdiag_common
  - Fix ibnetdiscover grouping for Cisco SFS7000
  - Add support to query the GUIDInfo table in smpquery
  - Allow user to specify a default switch map file


author: Hal Rosenstock <halr@voltaire.com> - 1.2.5
changelog:
  - Find perl modules in perl sitearch directory
  - Fix non standard prefix install for diag scripts
  - Clean gcc-4.1 warnings in saquery and ibdiag_common


author: Hal Rosenstock <halr@voltaire.com> - 1.2.4
changelog:
  - OpenFabrics 1.2.4 release
  - Fix diag rpmbuild from make dist
  - Include set_mthca_nodedesc.sh and dump_lfts.sh in the rpm


author: Hal Rosenstock <halr@voltaire.com> - 1.2.0
changelog:
  - OpenFabrics 1.2.0 release
  - Added brief option to ibcheckerrors and ibcheckerrs
  - Updated man pages
  - Added build version to saquery and updated build version tags of other tools
  - Added -N | nocolor to usage display of scripts
  - Fixed -nocolor and -G options on scripts 
  - Fixed error return status in ibchecknet
  - Added exit code to ibcheckerrors
  - Added nodename to output of ibcheckerrs
  - ibqueryerrors.pl fixes and improvements
  - Removed use of tmpfile for ibroute data in ibfindnodeusing.pl
  - Fixed undefined subroutine error in iblinkinfo.pl
  - Added switch-map option to ibtracert and ibnetdiscover
  - Cleaned up node descriptions before printing in saquery
  - Clarified --src-to-dst option in saquery
  - Added peer NodeDescription and LID to output of inbetdiscover
  - For grouping, ordered Spine and Line Nodes (for Voltaire chassis) in ibnetdiscover
  - Cleaned up node descriptions before printing in ibtracert and ibroute
  - Added additional sematics to -m option of saquery
  - Added dump_mfts.sh similar to dump_lfts.sh
  - ibnetdiscover improvements (memory leaks, ports moving, etc.)
  - Converted iblinkspeed.pl into iblinkinfo.pl and added additional capabilities
  - Added 0x in front of GUID printing of ibtracert
  - Fixed loopback handling in ibnetdiscover
  - Added support for querying Service Records to saquery
  - Added support for PerfMgt IsExtendedWidthSupported IBA 1.2 erratum in perfquery
  - For query operations, added peer port checking of linkwidth and speed
    active in ibportstate
  - Added support for DrSLID in smpquery
  - Added IB router support to ibnetdiscover and ibtracert
  - Added additional options to saquery
  - Added support to change LinkSpeedEnabled in ibportstate


author: Hal Rosenstock <halr@voltaire.com> - 1.1.0-rc1
changelog:
  - OpenFabrics 1.1-rc1 release
  - Added man pages
  - Made diag command/script options more consistent
  - saquery tool added
  - dump_lft.sh script added
  - Renamed discover.pl to ibdiscover.pl


author: Dan Walsh <dwalsh@redhat.com> - 1.9.1-1
changelog:
  - Upgrade to latest from NSA
  	* Merged patch to compile wit -fPIC instead of -fpic from
  	  Manoj Srivastava to prevent hitting the global offest table
  	  limit. Patch changed to include libselinux and libsemanage in
  	  addition to libsepol.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.17-1
changelog:
  - Upgrade to latest from NSA
  	* Merged patch to skip reload if no active store exists and
  	  the store path doesn't match the active store path from Dan Walsh.
  	* Merged patch to not destroy sepol handle on error path of
  	  connect from James Athey.
  	* Merged patch to add genhomedircon path to semanage.conf from
  	  James Athey.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.16-1
changelog:
  - Upgrade to latest from NSA
  	* Make most copy errors fatal, but allow exceptions for
  	  file_contexts.local, seusers, and netfilter_contexts if
  	  the source file does not exist in the store.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.15-1
changelog:
  - Upgrade to latest from NSA
  	* Merged separate local file contexts patch from Chris PeBenito.
  	* Merged patch to make most copy errors non-fatal from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.12-1
changelog:
  - Upgrade to latest from NSA
  	* Merged support for read operations on read-only fs from 
  	  Caleb Case (Tresys Technology).


author: Dan Walsh <dwalsh@redhat.com> - 1.6.9-1
changelog:
  - Upgrade to latest from NSA
  	* Merged several fixes from Serge Hallyn:
  	     dbase_file_cache:  deref of uninit data on error path.
  	     dbase_policydb_cache:  clear fp to avoid double fclose
  	     semanage_fc_sort:  destroy temp on error paths


author: Dan Walsh <dwalsh@redhat.com> - 1.6.8-1
changelog:
  - Upgrade to latest from NSA
  	* Updated default location for setfiles to /sbin to
  	  match policycoreutils.  This can also be adjusted via 
  	  semanage.conf using the syntax:
  	  [setfiles]
  	  path = /path/to/setfiles
  	  args = -q -c $@ $<
  	  [end]


author: Dan Walsh <dwalsh@redhat.com> - 1.6.6-1
changelog:
  - Upgrade to latest from NSA
  	* Merged updated file context sorting patch from Christopher
  	  Ashworth, with bug fix for escaped character flag.
  	* Merged file context sorting code from Christopher Ashworth 
  	  (Tresys Technology), based on fc_sort.c code in refpolicy.
  	* Merged python binding t_output_helper removal patch from Dan Walsh.
  	* Regenerated swig files.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.3-1
changelog:
  - Fix to work with new version of swig
  - Upgrade to latest from NSA
  	* Merged corrected fix for descriptor leak from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.2-1
changelog:
  - Upgrade to latest from NSA
  	* Merged Makefile PYLIBVER definition patch from Dan Walsh.
  	* Merged man page reorganization from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.6-1
changelog:
  - Make work on RHEL4
  - Upgrade to latest from NSA
  	* Merged abort early on merge errors patch from Ivan Gyurdiev.
  	* Cleaned up error handling in semanage_split_fc based on a patch
  	  by Serge Hallyn (IBM) and suggestions by Ivan Gyurdiev.
  	* Merged MLS handling fixes from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.28-1
changelog:
  - Upgrade to latest from NSA
  	* Merged bug fix for fcontext validate handler from Ivan Gyurdiev.
  	* Merged base_merge_components changes from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.26-1
changelog:
  - Upgrade to latest from NSA
  	* Merged paths array patch from Ivan Gyurdiev.
  	* Merged bug fix patch from Ivan Gyurdiev.
  	* Merged improve bindings patch from Ivan Gyurdiev.
  	* Merged use PyList patch from Ivan Gyurdiev.	
  	* Merged memory leak fix patch from Ivan Gyurdiev.
  	* Merged nodecon support patch from Ivan Gyurdiev.
  	* Merged cleanups patch from Ivan Gyurdiev.
  	* Merged split swig patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.23-1
changelog:
  - Upgrade to latest from NSA
  	* Merged optionals in base patch from Joshua Brindle.
  	* Merged treat seusers/users_extra as optional sections patch from
  	  Ivan Gyurdiev.
  	* Merged parse_optional fixes from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.21-1
changelog:
  - Upgrade to latest from NSA
  	* Merged seuser/user_extra support patch from Joshua Brindle.
  	* Merged remote system dbase patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.19-1
changelog:
  - Upgrade to latest from NSA
  	* Merged fname parameter patch from Ivan Gyurdiev.
  	* Merged more size_t -> unsigned int fixes from Ivan Gyurdiev.
  	* Merged seusers.system patch from Ivan Gyurdiev.
  	* Merged improve port/fcontext API patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.18-1
changelog:
  - Upgrade to latest from NSA
  	* Merged seuser -> seuser_local rename patch from Ivan Gyurdiev.
  	* Merged set_create_store, access_check, and is_connected interfaces
  	  from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.5.15-1
changelog:
  - Upgrade to latest from NSA
  	* Merged pywrap Makefile diff from Dan Walsh.
  	* Merged cache management patch from Ivan Gyurdiev.
  	* Merged bugfix for dbase_llist_clear from Ivan Gyurdiev.
  	* Merged remove apply_local function patch from Ivan Gyurdiev.
  	* Merged only do read locking in direct case patch from Ivan Gyurdiev.
  	* Merged cache error path memory leak fix from Ivan Gyurdiev.
  	* Merged auto-generated file header patch from Ivan Gyurdiev.
  	* Merged pywrap test update from Ivan Gyurdiev.
  	* Merged hidden defs update from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.14-1
changelog:
  - Upgrade to latest from NSA
  	* Merged disallow port overlap patch from Ivan Gyurdiev.
  	* Merged join prereq and implementation patches from Ivan Gyurdiev.
  	* Merged join user extra data part 2 patch from Ivan Gyurdiev.
  	* Merged bugfix patch from Ivan Gyurdiev.
  	* Merged remove add_local/set_local patch from Ivan Gyurdiev.
  	* Merged user extra data part 1 patch from Ivan Gyurdiev.
  	* Merged size_t -> unsigned int patch from Ivan Gyurdiev.
  	* Merged calloc check in semanage_store patch from Ivan Gyurdiev,
  	  bug noticed by Steve Grubb.
  	* Merged cleanups after add/set removal patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.9-1
changelog:
  - Upgrade to latest from NSA
  	* Merged const in APIs patch from Ivan Gyurdiev.
  	* Merged validation of local file contexts patch from Ivan Gyurdiev.
  	* Merged compare2 function patch from Ivan Gyurdiev.
  	* Merged hidden def/proto update patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.8-1
changelog:
  - Upgrade to latest from NSA
  	* Re-applied string and file optimization patch from Russell Coker,
  	  with bug fix.
  	* Reverted string and file optimization patch from Russell Coker.
  	* Clarified error messages from parse_module_headers and 
  	  parse_base_headers for base/module mismatches.


author: Dan Walsh <dwalsh@redhat.com> 1.5.6-1
changelog:
  - Upgrade to latest from NSA
  	* Clarified error messages from parse_module_headers and 
  	  parse_base_headers for base/module mismatches.
  	* Merged string and file optimization patch from Russell Coker.
  	* Merged swig header reordering patch from Ivan Gyurdiev.
  	* Merged toggle modify on add patch from Ivan Gyurdiev.
  	* Merged ports parser bugfix patch from Ivan Gyurdiev.
  	* Merged fcontext swig patch from Ivan Gyurdiev.
  	* Merged remove add/modify/delete for active booleans patch from Ivan Gyurdiev.
  	* Merged man pages for dbase functions patch from Ivan Gyurdiev.
  	* Merged pywrap tests patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.4-1
changelog:
  - Upgrade to latest from NSA
  	* Merged patch series from Ivan Gyurdiev.
  	  This includes patches to:
  	  - separate file rw code from linked list
  	  - annotate objects
  	  - fold together internal headers
  	  - support ordering of records in compare function
  	  - add active dbase backend, active booleans
  	  - return commit numbers for ro database calls
  	  - use modified flags to skip rebuild whenever possible
  	  - enable port interfaces
  	  - update swig interfaces and typemaps
  	  - add an API for file_contexts.local and file_contexts
  	  - flip the traversal order in iterate/list
  	  - reorganize sandbox_expand
  	  - add seusers MLS validation
  	  - improve dbase spec/documentation
  	  - clone record on set/add/modify


author: Dan Walsh <dwalsh@redhat.com> 1.5.3-1
changelog:
  - Upgrade to latest from NSA
  	* Merged further header cleanups from Ivan Gyurdiev.
  	* Merged toggle modified flag in policydb_modify, fix memory leak
  	  in clear_obsolete, polymorphism vs headers fix, and include guards
  	  for internal headers patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.1-2
changelog:
  - Upgrade to latest from NSA
  	* Merged toggle modified flag in policydb_modify, fix memory leak
  	  in clear_obsolete, polymorphism vs headers fix, and include guards
  	  for internal headers patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.1-1
changelog:
  - Upgrade to latest from NSA
  	* Added file-mode= setting to semanage.conf, default to 0644.
  	  Changed semanage_copy_file and callers to use this mode when
  	  installing policy files to runtime locations.


author: Dan Walsh <dwalsh@redhat.com> 1.3.64-1
changelog:
  - Upgrade to latest from NSA
  	* Changed semanage_handle_create() to set do_reload based on
  	  is_selinux_enabled().  This prevents improper attempts to
  	  load policy on a non-SELinux system.


author: Dan Walsh <dwalsh@redhat.com> 1.3.63-1
changelog:
  - Upgrade to latest from NSA
  	* Dropped handle from user_del_role interface.
  	* Removed defrole interfaces.


author: Dan Walsh <dwalsh@redhat.com> 1.3.61-1
changelog:
  - Upgrade to latest from NSA
  	* Merged Makefile python definitions patch from Dan Walsh.
  	* Removed is_selinux_mls_enabled() conditionals in seusers and users
  	  file parsers.


author: Dan Walsh <dwalsh@redhat.com> 1.3.59-1
changelog:
  - Add additional swig objects
  	* Merged wrap char*** for user_get_roles patch from Joshua Brindle.
  	* Merged remove defrole from sepol patch from Ivan Gyurdiev.
  	* Merged swig wrappers for modifying users and seusers from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.56-1
changelog:
  - Upgrade to latest from NSA
  	* Fixed free->key_free bug.
  	* Merged clear obsolete patch from Ivan Gyurdiev.
  	* Merged modified swigify patch from Dan Walsh 
  	  (original patch from Joshua Brindle).
  	* Merged move genhomedircon call patch from Chad Sellers.


author: Dan Walsh <dwalsh@redhat.com> 1.3.53-1
changelog:
  - Upgrade to latest from NSA
  	* Merged move seuser validation patch from Ivan Gyurdiev.
  	* Merged hidden declaration fixes from Ivan Gyurdiev,
  	  with minor corrections.


author: Dan Walsh <dwalsh@redhat.com> 1.3.52-1
changelog:
  - Upgrade to latest from NSA
  	* Merged cleanup patch from Ivan Gyurdiev.
  	  This renames semanage_module_conn to semanage_direct_handle,
  	  and moves sepol handle create/destroy into semanage handle
  	  create/destroy to allow use even when disconnected (for the
  	  record interfaces).


author: Dan Walsh <dwalsh@redhat.com> 1.3.51-1
changelog:
  - Upgrade to latest from NSA
  	* Clear modules modified flag upon disconnect and commit.
          * Added tracking of module modifications and use it to
  	  determine whether expand-time checks should be applied
  	  on commit.
  	* Reverted semanage_set_reload_bools() interface.


author: Dan Walsh <dwalsh@redhat.com> 1.3.48-1
changelog:
  - Upgrade to latest from NSA
  	* Disabled calls to port dbase for merge and commit and stubbed
  	  out calls to sepol_port interfaces since they are not exported.
  	* Merged rename instead of copy patch from Joshua Brindle (Tresys).
  	* Added hidden_def/hidden_proto for exported symbols used within 
  	  libsemanage to eliminate relocations.  Wrapped type definitions
  	  in exported headers as needed to avoid conflicts.  Added
  	  src/context_internal.h and src/iface_internal.h.
  	* Added semanage_is_managed() interface to allow detection of whether
  	  the policy is managed via libsemanage.  This enables proper handling
  	  in setsebool for non-managed systems.
  	* Merged semanage_set_reload_bools() interface from Ivan Gyurdiev,
  	  to enable runtime control over preserving active boolean values
  	  versus reloading their saved settings upon commit.


author: Dan Walsh <dwalsh@redhat.com> 1.3.43-1
changelog:
  - Upgrade to latest from NSA
  	* Merged seuser parser resync, dbase tracking and cleanup, strtol
  	  bug, copyright, and assert space patches from Ivan Gyurdiev.
  	* Added src/*_internal.h in preparation for other changes.
   	* Added hidden/hidden_proto/hidden_def to src/debug.[hc] and
            src/seusers.[hc].


author: Dan Walsh <dwalsh@redhat.com> 1.3.41-1
changelog:
  - Upgrade to latest from NSA
  	* Merged interface parse/print, context_to_string interface change,
  	  move assert_noeof, and order preserving patches from Ivan Gyurdiev.
          * Added src/dso.h in preparation for other changes.
  	* Merged install seusers, handle/error messages, MLS parsing,
  	  and seusers validation patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.39-1
changelog:
  - Upgrade to latest from NSA
  	* Merged record interface, dbase flush, common database code,
  	  and record bugfix patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.38-1
changelog:
  - Upgrade to latest from NSA
  	* Merged dbase policydb list and count change from Ivan Gyurdiev.
  	* Merged enable dbase and set relay patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.35-1
changelog:
  - Update from NSA
  	* Merged sepol handle passing, seusers support, and policydb cache
  	  patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.34-1
changelog:
  - Update from NSA
  	* Merged resync to sepol changes and booleans fixes/improvements 
  	  patches from Ivan Gyurdiev.
  	* Merged support for genhomedircon/homedir template, store selection,
  	  explicit policy reload, and semanage.conf relocation from Joshua
  	  Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.32-1
changelog:
  - Update from NSA
  	* Merged resync to sepol changes and transaction fix patches from
  	  Ivan Gyurdiev.
  	* Merged reorganize users patch from Ivan Gyurdiev.
  	* Merged remove unused relay functions patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.30-1
changelog:
  - Update from NSA
  	* Fixed policy file leaks in semanage_load_module and
  	  semanage_write_module.
  	* Merged further database work from Ivan Gyurdiev.
  	* Fixed bug in semanage_direct_disconnect.


author: Dan Walsh <dwalsh@redhat.com> 1.3.28-1
changelog:
  - Update from NSA
  	* Merged interface renaming patch from Ivan Gyurdiev.
  	* Merged policy component patch from Ivan Gyurdiev.
  	* Renamed 'check=' configuration value to 'expand-check=' for 
  	  clarity.
  	* Changed semanage_commit_sandbox to check for and report errors 
  	  on rename(2) calls performed during rollback.
  	* Added optional check= configuration value to semanage.conf 
  	  and updated call to sepol_expand_module to pass its value
  	  to control assertion and hierarchy checking on module expansion.
  	* Merged fixes for make DESTDIR= builds from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.24-1
changelog:
  - Update from NSA
  	* Merged default database from Ivan Gyurdiev.
  	* Merged removal of connect requirement in policydb backend from
  	  Ivan Gyurdiev.
  	* Merged commit locking fix and lock rename from Joshua Brindle.
  	* Merged transaction rollback in lock patch from Joshua Brindle.
  	* Changed default args for load_policy to be null, as it no longer
  	  takes a pathname argument and we want to preserve booleans.
  	* Merged move local dbase initialization patch from Ivan Gyurdiev.
  	* Merged acquire/release read lock in databases patch from Ivan Gyurdiev.
  	* Merged rename direct -> policydb as appropriate patch from Ivan Gyurdiev.
  	* Added calls to sepol_policy_file_set_handle interface prior
  	  to invoking sepol operations on policy files.
  	* Updated call to sepol_policydb_from_image to pass the handle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.20-1
changelog:
  - Update from NSA
  	* Changed default args for load_policy to be null, as it no longer
  	  takes a pathname argument and we want to preserve booleans.
  	* Merged move local dbase initialization patch from Ivan Gyurdiev.
  	* Merged acquire/release read lock in databases patch from Ivan Gyurdiev.
  	* Merged rename direct -> policydb as appropriate patch from Ivan Gyurdiev.
  	* Added calls to sepol_policy_file_set_handle interface prior
  	  to invoking sepol operations on policy files.
  	* Updated call to sepol_policydb_from_image to pass the handle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.20-1
changelog:
  - Update from NSA
  	* Merged user and port APIs - policy database patch from Ivan
  	Gyurdiev.
  	* Converted calls to sepol link_packages and expand_module interfaces
  	from using buffers to using sepol handles for error reporting, and 
  	changed direct_connect/disconnect to create/destroy sepol handles.


author: Dan Walsh <dwalsh@redhat.com> 1.3.18-1
changelog:
  - Update from NSA
  	* Merged bugfix patch from Ivan Gyurdiev.
  	* Merged seuser database patch from Ivan Gyurdiev.
  	Merged direct user/port databases to the handle from Ivan Gyurdiev.
  	* Removed obsolete include/semanage/commit_api.h (leftover).
  	Merged seuser record patch from Ivan Gyurdiev.
  	* Merged boolean and interface databases from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.14-1
changelog:
  - Update from NSA
  	* Updated to use get interfaces for hidden sepol_module_package type.
  	* Changed semanage_expand_sandbox and semanage_install_active
  	to generate/install the latest policy version supported	by libsepol
  	by default (unless overridden by semanage.conf), since libselinux
  	will now downgrade automatically for load_policy.
  	* Merged new callback-based error reporting system and ongoing
  	database work from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.11-1
changelog:
  - Update from NSA
  	* Fixed semanage_install_active() to use the same logic for
  	selecting a policy version as semanage_expand_sandbox().  Dropped
  	dead code from semanage_install_sandbox().


author: Dan Walsh <dwalsh@redhat.com> 1.3.10-1
changelog:
  - Update from NSA
  	* Updated for changes to libsepol, and to only use types and interfaces
  	provided by the shared libsepol.


author: Dan Walsh <dwalsh@redhat.com> 1.3.7-1
changelog:
  - Update from NSA
  	* Merged patch series from Ivan Gyurdiev.
  	  (pointer typedef elimination, file renames, dbase work, backend
  	   separation)
  	* Split interfaces from semanage.[hc] into handle.[hc], modules.[hc].
  	* Separated handle create from connect interface.
  	* Added a constructor for initialization.
  	* Moved up src/include/*.h to src.
  	* Created a symbol map file; dropped dso.h and hidden markings.


author: Dan Walsh <dwalsh@redhat.com> 1.3.5-1
changelog:
  - Update from NSA
  	* Split interfaces from semanage.[hc] into handle.[hc], modules.[hc].
  	* Separated handle create from connect interface.
  	* Added a constructor for initialization.
  	* Moved up src/include/*.h to src.
  	* Created a symbol map file; dropped dso.h and hidden markings.


author: Dan Walsh <dwalsh@redhat.com> 1.3.3-1
changelog:
  - Update from NSA
  	* Merged boolean record, stub record handler, and status codes 
  	  patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.2-1
changelog:
  - Update from NSA
  	* Merged stub iterator functionality from Ivan Gyurdiev.
  	* Merged interface record patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.1-1
changelog:
  - Update from NSA
  	* Merged stub functionality for managing user and port records,
  	and record table code from Ivan Gyurdiev.
  	* Updated version for release.


author: Dan Walsh <dwalsh@redhat.com> 1.1.6-1
changelog:
  - Update from NSA
  	* Merged semod.conf template patch from Dan Walsh (Red Hat),
  	but restored location to /usr/share/semod/semod.conf.
  	* Fixed several bugs found by valgrind.
  	* Fixed bug in prior patch for the semod_build_module_list leak.
  	* Merged errno fix from Joshua Brindle (Tresys).
  	* Merged fix for semod_build_modules_list leak on error path
  	  from Serge Hallyn (IBM).  Bug found by Coverity.


author: Dan Walsh <dwalsh@redhat.com> 1.1.3-1
changelog:
  - Update from NSA
  	* Merged errno fix from Joshua Brindle (Tresys).
  	* Merged fix for semod_build_modules_list leak on error path
  	  from Serge Hallyn (IBM).  Bug found by Coverity.
  	* Merged several fixes from Serge Hallyn (IBM).  Bugs found by
  	  Coverity.
  	* Fixed several other bugs and warnings.
  	* Merged patch to move module read/write code from libsemanage
  	  to libsepol from Jason Tang (Tresys).	
  	* Merged relay records patch from Ivan Gyurdiev.
  	* Merged key extract patch from Ivan Gyurdiev.

  - Initial version
  - Created by Stephen Smalley <sds@epoch.ncsc.mil>


author: Petr Machata <pmachata@redhat.com> - 2.6.4-5.el5.4
changelog:
  - Add requires: shared-mime-info when building with gui
  - Install Copyright.txt
  - Mark documentation with %doc
  - Fix source file permissions
  - Resolves: #676668
  - Resolves: #673914


author: Rex Dieter <rdieter@fedoraproject.org> - 2.6.2-3
changelog:
  - Add -DCMAKE_VERBOSE_MAKEFILE=ON to %cmake (#474053)
  - preserve timestamp of macros.cmake
  - cosmetics


author: Orion Poplawski <orion@cora.nwra.com> - 2.4.6-4
changelog:
  - Update macros.cmake to add CMAKE_INSTALL_LIBDIR, INCLUDE_INSTALL_DIR,
    LIB_INSTALL_DIR, SYSCONF_INSTALL_DIR, and SHARE_INSTALL_PREFIX


author: Orion Poplawski <orion@cora.nwra.com> - 2.4.3-2
changelog:
  - vim 7.0 now ships cmake files, so don't ship ours (bug #201018)
  - Add patch to Linux.cmake for Fortran soname support for plplot


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.6-1
changelog:
  - correctly initialize NSS after the KDC detaches from the terminal, so that
    we can still read the on-disk database with NSS 3.12
  - fix new wire-incompatibilities with some implementations by making the
    version number of signed-data items configurable (fallout from #242109)


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.5-1
changelog:
  - add configurable client-side certificate matching
  - add more configurable KDC acceptance criteria
  - fix wire-incompatibilities with some newer implementations (#242109)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix encoding/interpreting of e_data, encoding of DH parameters, error
    reporting for revoked certificates


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.5-1
changelog:
  - fix inclusion of the signer certifying chain now that we're careful to
    destroy certificates when we're finished with them (#223552)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.4-1
changelog:
  - fix validation of signer certificates when the entire certifying chain isn't
    already known to us, but intermediate links are provided in signed-data
    (#223552)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.3-1
changelog:
  - update preauth plugin support patch to base off of 1.5.1-1.6 diff
  - unref/free certificates, keys, contexts, and slots once we're finished
    using them (#221936)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.1-1_pal18998
changelog:
  - implement a "mappings_file" option a la Heimdal's, so that we don't have
    to have the principal name encoded in the certificate's subjectAltName
    extension in order to accept it for a particular Kerberos identity (#212867)


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.0-1_pal18998
changelog:
  - fix protocol implementation errors which caused interop problems with Heimdal
  - update preauth plugin support backport to 1.6 branch, revision 18998


author: Nalin Dahyabhai <nalin@redhat.com> 0.2.0-1_pal18750
changelog:
  - implement DH-based key agreement
  - disable OCSP by default on the client-side (#209244)
  - update to changes for newer support backport


author: Mike A. Harris <mharris@redhat.com> 1.0.4-1
changelog:
  - Updated to new upstream version 1.0.4 (basically new documentation)
  - Updated to a more end-user friendly package description and summary


author: Tomas Hoger <thoger@redhat.com> - 15.5-15.el5_3.4
changelog:
  - Merge incdir-overflow and snprintf patches for better readability,
    snprintf is used now with PATHLEN limit without other adjustments,
    related strlen / %.*s / *_len are no longer needed and were dropped
  - Update tempsec patch, drop extraneous s(n)printf argument
    to suppress compiler warnings
  - Update fscanf-overflows patch to perform reffile argument length
    check earlier, now also includes strlen-adjust-fix patch


author: Neil Horman <nhorman@redhat.com>
changelog:
  - Added cscope-indexer helper and xcscope lisp addon
  - Added man page for xcscope
  - Added triggers to add xcscope.el pkg to (x)emacs
  - Thanks to Ville, Michael and Jens for thier help :)


author: Neil Horman <nhorman@redhat.com>
changelog:
  - Added upstream ocs fix
  - Added feature to find symbol assignments
  - Changed default SYSDIR directory to /var/lib/cs
  - Incoproated M. Schwendt's fix for ocs -s


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.9-5
changelog:
  - fix #290661 - use relative symlink in /etc/smrsh
  - fix #461707 - break CC field correctly
  - fix #453377 - don't parse problematic mails many times, but isolate them
  - fix #521888 - fix instances of #!/usr/bin/env python in mailman
  - fix #515157 - fixed traceback when changing email address globally


author: Tomas Smetana <tsmetana@redhat.com> - 3:2.1.9-4
changelog:
  - fix #252185 init script prevents proper SELinux domain transitions
  - fix #242672 wrong init script return value


author: John Dennis <jdennis@redhat.com> - 3:2.1.6-1.fc4
changelog:
  - initial port of 2.1.6
    remove mailman-2.1.5-moderator-request.patch, present in new release
    remove mailman-2.1-CAN-2005-0202.patch,       present in new release
    remove mailman-2.1-CAN-2004-1177.patch,       present in new release


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-31.fc4
changelog:
  - fix bug #132750, add daemon to mail-gid so courier mail server will work.
  - fix bug #143008, wrong location of mailmanctl in logrotate
  - fix bug #142605, init script doesn't use /var/lock/subsys


author: John Dennis <jdennis@redhat.com> 3:2.1.5-26
changelog:
  - fix typo in install documentation
  - fix error in templates/Makefile.in, bad install args, fixes bug #136001,
    thank you to Kaj J. Niemi for spotting this.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-21
changelog:
  - move list data dir to /var/lib/mailman to conform to FHS
    move lock dir to /var/lock/mailman to conform to FHS
    move config dir (VAR_PREFIX/data) to /etc/mailman to conform to FHS
    Thanks to Matt Domsch for pointing this out.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-20
changelog:
  - fix bug #132732, security policy violations,
  - bump release verison
    move non-data installation files from /var/mailman to /usr/lib/mailman,
    update documentation


author: John Dennis <jdennis@redhat.com> 3:2.1.5-15
changelog:
  - fix bug #117615, don't overwrite user modified templates on install
    made template directory "config noreplace"


author: John Dennis <jdennis@redhat.com> 3:2.1.5-14
changelog:
  - add comments into the crontab files so users know the /etc/cron.d
    file is volitile and will edit the right file.
    Also make the master crontab file "config noreplace" so edits are preserved.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-10
changelog:
  - fix bug #129492 and bug #120912
    stop using crontab to setup mailman's cron jobs,
    instead install cron script in /etc/cron.d


author: John Dennis <jdennis@redhat.com> 3:2.1.5-9
changelog:
  - apply patch to elminate "-1 LISTNAME moderator request(s) waiting" messages
    problem desciption here:
    http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.038.htp


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-6
changelog:
  - fix bug in pre scriplet, last command had been "service mailman stop"
    which should have been harmless if mailman was not installed except
    that it left the exit status from the script as non-zero and rpm
    aborted the install.


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-5
changelog:
  - add status reporting to init.d control script
    stop mailman during an installation
    restart mailman if it had been running prior to installation


author: John Dennis <jdennis@redhat.com> 3:2.1.5-1
changelog:
  - bring up to latest 2.1.5 upstream release
    From Barry Warsaw: Mailman 2.1.5, a bug fix release that also
    contains new support for the Turkish language, and a few minor new
    features. Mailman 2.1.5 is a significant upgrade which should
    improve disk i/o performance, administrative overhead for discarding
    held spams, and the behavior of bouncing member disables.  This
    version also contains a fix for an exploit that could allow 3rd
    parties to retrieve member passwords.  It is thus highly recommended
    that all existing sitesupgrade to the latest version


author: Warren Togami <wtogami@redhat.com> 3:2.1.4-4
changelog:
  - #105638 fix bytecompile and rpm -V
  - postun /etc/postfix/aliases fix
  - clean uninstall (no more empty dirs)
  - #115378 RedirectMatch syntax fix


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - fix bug 72004, 74483, 74484, 87856 - improper log rotation
  - fix bug 88083 - mailman user/group needed to exist during build
  - fix bug 88144 - wrong %file attributes on mm_cfg.py
  - fix bug 89221 - mailman user not created on install
  - fix bug 89250 - wrong pid file name in initscript


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - various small tweaks to the spec file to make installation cleaner
  - use /usr/bin/python when compiling, redirect compile output to /dev/null,
  - don't run update in %post, let the user do it, remove the .pyc files in %postun,
  - add setting of MAILHOST and URLHOST to localhost.localdomain, don't let
  - configure set them to the build machine.


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - 1) remove config patch, mailmanctl was not the right file to install in init.d,
  - it needed to be scripts/mailman
  - 2) rename httpd-mailman.conf to mailman.conf, since the file now lives
  - in httpd/conf.d directory the http prefix is redundant and inconsistent
  - with the other file names in that directory.


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - Bring package up to date with current upstream source, 2.1
  - Fix several install/packaging problems that were in upstream source
  - Add multiple mail group functionality
  - Fix syntax error in fblast.py
  - Remove the forced setting of mail host and url host in mm_cfg.py


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.9-1
changelog:
  - include README.QMAIL in with the docs (#58887)
  - include README.SENDMAIL and README.EXIM in with the docs
  - use an included httpd.conf file instead of listing the configuration
    directives in the %description, which due to specspo magic might look
    wrong sometimes (part of #51324)
  - interpolate the DEFAULT_HOST_NAME value in mm.cfg into both the DEFAULT_URL
    and MAILMAN_OWNER (#57987)
  - move logs to /var/log/mailman, qfiles to /var/spool/mailman, rotate
    logs in the log directory (#48724)
  - raise exceptions when someone tries to set the admin address for a list
    to that of the admin alias (#61468)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix a default permissions problem in /var/mailman/archives/private,
    reported by Johannes Erdfelt
  - update to 2.0.9


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.8-1
changelog:
  - set FQDN and URL at build-time so that they won't be set to the host the
    RPM package is built on (#59177)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.0.5
  - change the default hostname from localhost to localhost.localdomain in the
    default configuration
  - chuck configuration file settings other than those dependent on the host name
    (the build system's host name is not a good default)  (#32337)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make the default owner root again so that root owns the docs
  - update to 2.0beta5, which fixes a possible security vulnerability
  - add smrsh symlink


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to beta4
  - change uid/gid to apache.apache to match apache (#13593)
  - properly recompile byte-compiled versions of the scripts (#13619)
  - change mailman alias from root to postmaster


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move web files to reside under /var/www
  - move files from /usr/share to /usr/share
  - integrate spot-fixes from mailman lists via gnome.org


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-22
changelog:
  - refuse to supply non-password information via prompter callback when
    obtaining password-changing credentials (#715073)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-21
changelog:
  - backport: during password change, only set PAM_AUTHTOK when we have
    answered both a new password prompt and a new password confirmation
    prompt with the same value (#713967)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-19
changelog:
  - link pam_krb5 with -z nodelete so that memory allocated by library
    dependencies which is lost at unload doesn't leak, for the sake of
    applications which call PAM for authentication many times over (#643962)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-18
changelog:
  - backport infrastructure for handling translations (part of #526067)
  - patch in current translations (the rest of #526067)
  - add build-time dependency on gettext-devel (more of #526067)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-17
changelog:
  - recognize "novalidate" as an option which takes a list of services for
    which TGT validation shouldn't be attempted (more of #541177)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-16
changelog:
  - backport fixes to make the libdefaults verify_ap_req_nofail setting
    control what happens when we can't read keytabs, and enable TGT validation
    by default (#541177)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-15
changelog:
  - update backport for selecting which key to use for validation so that it
    prefers services with the local host name as the instance, from HEAD (more
    of #450776)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-14
changelog:
  - backport the "multiple_ccaches" option from HEAD, requiring that it
    be enabled to not immediately remove an old ccache when asked to create
    a new one (#463417)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-13
changelog:
  - add patch to add the "chpw_prompt" option, to allow the older behavior
    of attempting a password-change during authentication if libkrb5 detects
    an expired password, based on patch from Olivier Fourdan (#509092)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-12
changelog:
  - don't vary the password prompt depending on whether or not the user exists
    or is known to the KDC (CVE-2009-1384, #505265)
  - prefer using the "host" service when verifying that a TGT isn't forged,
    from HEAD (#450776)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-11
changelog:
  - don't enforce minimum_uid when no_user_check is also used, from
    HEAD (#490404)
  - don't try to get password-changing creds with all of the flags set
    that we'd request for a TGT (#489015)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-10
changelog:
  - add workaround for libpam returning success from pam_get_user() when it
    returns a NULL user name (#467208)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-9
changelog:
  - add backported fix for ccache permissions bypass when the "existing_ticket"
    option is used (CVE-2008-3825, #462113)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-8
changelog:
  - fix a packaging error: we were including the unpatched version of README
    after it had been patched


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport change to link directly with libpam.so to keep applications which
    dlopen libpam from failing to load pam_krb5.so (#460998)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-7
changelog:
  - backport the "null_afs"/"nullafs" option from 2.3.0, based on Jan Iven's
    patch, which instructs pam_krb5 to guess "afs@REALM" before "afs/cell@REALM"
    when forced to guess the principal name of a given cell (#249558)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport change to use LOG_AUTHPRIV instead of the default facility when
    logging messages (#354291)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-6
changelog:
  - when erroneously called with "use_first_pass" and no previously-supplied
    password, ensure that we make at least one attempt to authenticate to the
    KDC so that we can at least tell the difference between an unknown user
    and other types of errors (more of #400611)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-5
changelog:
  - backport fixes from 2.2.15 to return user-unknown instead of auth-error
    when the client in a password change doesn't match a known client principal,
    and to avoid prompting for a new password unless we've previously gotten
    password-changing creds (#402721)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-4
changelog:
  - skip second and third auth attempts whenever we already know that the
    client is unknown to the KDC (#400611)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-3
changelog:
  - disable libkrb5's prompt-for-password-change-when-getting-initial-creds
    behavior, if it provides a function to let us do that (#402721)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.10-0.1
changelog:
  - revert previous changes to how prompting works, and add a
    no_subsequent_prompt option to suppress libkrb5-based prompts during
    authentication, providing the PAM_AUTHTOK for all questions which
    libkrb5 asks


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.10-0
changelog:
  - rework prompting so that we stop getting stray prompts every now and then,
    and so that use_first_pass will *never* prompt for any information


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.9-1
changelog:
  - return PAM_IGNORE instead of PAM_SERVICE_ERR when we're called in
    an unsafe situation and told to refresh credentials (#197428)
  - drop from setuid to "normal" before calling our storetmp helper, so that
    it doesn't freak out except when *it* is setuid (#190159)
  - fix handling of "external" cases where the forwarded creds don't belong to
    the principal name we guessed for the user (#182239,#197660)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.8-1
changelog:
  - don't try to validate creds in a password-changing situation, because the
    attempt will always fail unless the matching key is in the keytab, which
    should never be the case for the password-changing service (#187303, rbasch)
  - if v4 has been disabled completely, go ahead and try to set 2b tokens
    because we're going to end up having to do that anyway (#182378)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.7-1
changelog:
  - add v4 credential conversion for "use_shmem" and "external" cases (though
    it should be redundant with "use_shmem") (#182239)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.6-1
changelog:
  - add a "krb4_use_as_req" option so that obtaining v4 creds kinit-style can
    be disabled completely (Hugo Meiland)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.5-1
changelog:
  - don't log debug messages that we're skipping session setup/teardown unless
    debugging is enabled (#179037)
  - try to build the module with -Bsymbolic if we can figure out how to do that


author: Nalin Dahyabhai <nalin@redhat.com> 1.57-1
changelog:
  - force -fPIC
  - add --with-moduledir, --with-krb5-libs, --with-krbafs-libs to configure
  - add per-user stashes and return values


author: Nalin Dahyabhai <nalin@redhat.com> 1.49-1
changelog:
  - set PAM_USER using the user's parsed name, converted back to a local name
  - add account management service (checks for key expiration and krb5_kuserok())
  - handle account expiration errors


author: Nalin Dahyabhai <nalin@redhat.com> 1.46-1
changelog:
  - link with libresolv to get res_search, tip from Justin McNutt, who
    built it statically
  - explicitly link with libdes425
  - handle cases where getpwnam_r fails but still sets the result pointer
  - if use_authtok is given and there is no authtok, error out


author: Nalin Dahyabhai <nalin@redhat.com> 1.43-1
changelog:
  - add minimum UID support (#52358)
  - don't link pam_krb5 with libkrbafs
  - make all options in krb5.conf available as PAM config arguments


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - note that we had to prepend the current directory to a given path in
    dlopen.c when we had to (noted by Onime Clement)


author: Nalin Dahyabhai <nalin@redhat.com> 1.42-1
changelog:
  - return PAM_NEW_AUTHTOK_REQD when attempts to get initial credentials
    fail with KRB5KDC_ERR_KEY_EXP (noted by Onime Clement)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add info about accessing the CVS repository to the README
  - parser cleanups (thanks to Dane Skow for a more complicated sample)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't set forwardable and assorted other flags when getting password-
    changing service ticket (noted, and fix supplied, by Onime Clement)
  - try __posix_getpwnam_r on Solaris before we try getpwnam_r, which may
    or may not be expecting the same number/type of arguments (noted by
    Onime Clement)
  - use krb5_aname_to_localname to convert the principal to a login name
    and set PAM_USER to the result when authenticating
  - some autoconf fixes for failure cases


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't call initialize_krb5_error_table() or initialize_ovk_error_table()
    if they're not found at compile-time (reported for RHL 6.x by Chris Riley)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - note that [pam] is still checked in addition to [appdefaults]
  - note that AFS and Kerberos IV support requires working Kerberos IV
    configuration files (i.e., kinit -4 needs to work) (doc changes
    suggested by Martin Schulz)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add max_timeout, timeout_shift, initial_timeout, and addressless options
    (patches from Simon Wilkinson)
  - fix the README to document the [appdefaults] section instead of [pam]
  - change example host and cell names in the README to use example domains


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't delete tokens unless we're also removing ticket files (report and
    patch from Sean Dilda)
  - report initialization errors better


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - treat semicolons as a comment character, like hash marks (bug reported by
    Greg Francis at Gonzaga University)
  - use the [:blank:] equivalence class to simplify the configuration file parser
  - don't mess with the real environment
  - implement mostly-complete aging support


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't fail to fixup the krb5 ccache if something goes wrong obtaining
    v4 credentials or creating a krb4 ticket file (#33262)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fixup the man page
  - log return code from k_setpag() when debugging
  - create credentials and get tokens when setcred is called for REINITIALIZE


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't twiddle ownerships until after we get AFS tokens
  - use the current time instead of the issue time when storing v4 creds, since
    we don't know the issuing host's byte order
  - depend on a PAM development header again instead of pam-devel


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a separate config file parser for compatibility with settings that
    predate the appdefault API
  - use a version script under Linux to avoid polluting the global namespace
  - don't have a default for afs_cells
  - need to close the file when we succeed in fixing permissions (noted by
    jlkatz@eos.ncsu.edu)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use the appdefault API to read krb5.conf if available
  - create v4 tickets in such a way as to allow 1.2.2 to not think there's
    something fishy going on


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - only try to delete ccache files once
  - ignore extra data in v4 TGTs, but log that we got some
  - require "validate" to be true to try validating, and fail if validation fails


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix prompting when the module's first in the stack and the user does not have
    a corresponding principal in the local realm
  - properly implement TGT validation
  - change a few non-error status messages into debugging messages
  - sync the README and the various man pages up


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add Seth Vidal's no_user_check flag
  - document no_user_check and skip_first_pass options in the man pages
  - rebuild against Kerberos 5 1.2 (release 15)


author: Lon Hohberger <lhh@redhat.com> 2.3-24
changelog:
  - Extend max file/archive size to 2^32-8193 (4294959103) bytes
  - Include better debugging output for configure script


author: Pixel <pixel@mandriva.com> 1.16-1mdv2008.1
changelog:
  + Revision: 183268
  - update URL
  - 1.16:
  - do not install monitor-get-edid-using-vbe on archs where VBE is not
    available (Remi Collet)


author: Pixel <pixel@mandriva.com> 1.15-1mdv2008.1
changelog:
  + Revision: 157016
  - 1.15:
  - monitor-probe:
    o probe "using DMI" before "using X"
  - monitor-probe-using-X:
    o in last resort, get Intel BIOS mode when "BIOS panel mode is bigger than
      probed programmed mode"


author: Pixel <pixel@mandriva.com> 1.14-1mdv2008.1
changelog:
  + Revision: 147502
  - 1.14:
  - monitor-edid, monitor-get-edid:
    o call monitor-get-edid-using-vbe with a range of ports, it stops on first
      success (by default it tries port 0 then port 1)


author: Pixel <pixel@mandriva.com> 1.13-1mdv2008.1
changelog:
  + Revision: 146846
  - 1.13:
  - monitor-get-edid:
    o skip /proc/acpi/video/**/EDID files which can't be valid (#34417)
    o minimal support for getting EDID from different DDC port
      (experimental, need testing before using it in monitor-edid)

    + Olivier Blin <oblin@mandriva.com>
      - restore BuildRoot

    + Thierry Vignaud <tvignaud@mandriva.com>
      - kill re-definition of %buildroot on Pixel's request


author: Pixel <pixel@mandriva.com> 1.12-1mdv2008.0
changelog:
  + Revision: 93044
  - use make install
  - 1.12:
  - monitor-probe-using-X:
    o when an EDID is found in Xorg.log, pass it to monitor-parse-edid
    o handle --perl option (passed to monitor-parse-edid)


author: Gwenole Beauchesne <gbeauchesne@mandriva.com> 1.11-1mdv2007.0
changelog:
  - fix ballback to old get_edid() function
  - ignore VBIOS checksum failures, use CPU emulator in that case


author: Pixel <pixel@mandriva.com> 1.9-1mdk
changelog:
  - monitor-get-edid is now a perl script able to probe /proc/acpi/video
    (or /proc/device-tree on PPC)
  - binary monitor-get-edid is now monitor-get-edid-using-vbe
  - monitor-edid is able to get more than one head


author: Pixel <pixel@mandriva.com> 1.5-1mdk
changelog:
  - add option --try-in-console when probing edid
    since probing edid sometimes only work in console
  - use this option by default in monitor-probe


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-21..el5_7.2
changelog:
  - Fix multilib upgrade problems on ia64 (#649682)
  - Fix test problems with multilib workaround for ia64 (#649725)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-21..el5_7.1
changelog:
  - Fix some cases where the file chooser is not responding
    well to initial selection (Resolves: #648555, #648557)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-20
changelog:
  - Update Telugu translations (Resolves: #225373)
  - Fix a problem with tray icons in KDE (Resolves: #216847, #236650, #240049)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-17
changelog:
  - Make printing to raw print queues work  (#224202)
  - Fix a crash in gdk_region_polygon()  (#237153)
  - Fix a warning from GtkCalendar   (#218676)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-13
changelog:
  - Further fixes for bug 218755:
    - Make gdk_pixbuf_loader_close() idempotent
    - Always emit the closed signal when the loader is closed


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-10
changelog:
  - Fix error handling in pixbuf loaders (#218755)
  - Properly pass multi-value options to cups (#219115)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-8
changelog:
  - Fix a crash in the handling of invalid icon themes (#218247)
  - Give accessible names to message dialogs (#215472)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-1
changelog:
  - Update to 2.10.4
  - Drop upstreamed patches
  - Update the search patch
  - Require pkgconfig in the -devel package


author: Ray Strode <rstrode@redhat.com> - 2.10.1-2
changelog:
  - patch from Jonathan Matthew <jontahn@kaolin.wh9.net> to fix
    crash in GtkTreeModelFilter (upstream bug 346800)


author: Matthias Clasen <mclasen@redhat.com> - 2.9.0-4
changelog:
  - Bump required versions of GLib, Pango and cairo
  - Add conflicts to force updating theme engine packages


author: Christopher Aillon <caillon@redhat.com> 2.8.11-6
changelog:
  - Fix up jkeating's recent %changelog entry to match this spec's style
  - Make the devel package Require %{version}-%{release}


author: Matthias Clasen <mclasen@redhat.com> - 2.4.14-1
changelog:
  - Upgrade to 2.4.14
  - Remove the no longer needed pa.po patch
  - Adjust gtk+-2.4.7-update-counter.patch


author: Matthias Clasen <mclasen@redhat.com> - 2.4.13-5
changelog:
  - Include an upstream bugfix in the 
    gtk+-2.4.9-treeview-activate.patch. This fixes
    a crasher bug (#137461)


author: Owen Taylor <otaylor@redhat.com> - 2.4.7-2.2
changelog:
  - Fix problem with infinite loop on bad BMP data (#130450, 
    test BMP from Chris Evans, fix from Manish Singh)


author: Matthias Clasen <mclasen@redhat.com> - 2.4.1-3
changelog:
  - Don't install testgtk and testtext
  - Rename binaries to -32/-64 (#124478)
  - Move arch-dependent config files to /etc/gtk-2.0/$host (#124482)
  - Add wrappers for updating the arch-dependent config files


author: Mark McLoughlin <markmc@redhat.com> 2.3.4-1
changelog:
  - Update to 2.3.4
  - Remove the xft-prefs patch, its upstream now
  - Don't kill libtool's hardcode_libdir_flag_spec anymore


author: Owen Taylor <otaylor@redhat.com> 2.2.4-2.1
changelog:
  - Fix up tutorial in packaging (#90197), add FAQ 
  - Back out change to make KP_Decimal interpretation dependent on locale
    (#101046)


author: Owen Taylor <otaylor@redhat.com> 2.2.2-2.1
changelog:
  - XFlush() rather than XSync() at the end of process_all_updates()
    (big remote X anaconda speedup)
  - Add patch to fix frequent Red Hat 9 crash 
    http://bugzilla.gnome.org/show_bug.cgi?id=105745


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Fix postun to not try to run a script through ldconfig
  - Only remove the gtk.immodules and gdk-pixbuf.loaders files if uninstalling
    while not upgrading


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.1.3
  - remove TODO from doc, no longer exists
  - remove 64bit patch, now upstream
  - comment out scroll_to patch, jrb has to deal with this
  - remove keycode patch now upstream
  - remove usintl patch now upstream
  - remove imenvar patch, now upstream
  - remove xftprefs patch now upstream
  - remove xftdraw patch now upstream
  - remove installdir patch (no longer applies) and do "makeinstall RUN_QUERY_IMMODULES_TEST=false"
  - remove extranotify patch, now upstream
  - add gdk-pixbuf-query-loaders to file list
  - remove gdk-pixbuf.loaders and gtk.immodules in postun as they are
    not owned by the package (these should probably live in /var since they 
    aren't config files and we overwrite them all the time)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fix a memory leak in xftprefs.patch
  - Fix extra settings notifies on startup that were causing significant
    performance problems as fonts were reloaded.


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fixes to GtkIMContextSimple compose table for us-intl keyboards
    (#70995, Alexandre Oliva)
  - Fix problem with keycodes passed to GtkIMContextXIM


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Remove fixed-ltmain.sh, no longer needed
  - Fix bug with GTK_IM_MODULE environment variable
  - Remove profile.d entries setting GDK_USE_XFT, since we now default to it on
  - Backport patch from CVS HEAD to get Xft to work on non-RENDER XServers
  - Version 2.0.6


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add reference docs to -devel package (#61184)
  - Use GTK2_RC_FILES, not GTK_RC_FILES, since KDE points GTK_RC_FILES 
    to gtk-1.2 ~/.gtkrc


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Version 1.3.11
  - check atk/pango versions explicitly prior to build,
    so that --nodeps tricks don't result in bad binary RPMs


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - PreReq specific pango and atk versions (#49434)
  - Don't package gtk.immodules (#49584)
  - Added BuildPrereq for libtiff-devel, libjpeg-devel, libpng-devel (#49495)
  - Configure with --disable-gtk-doc (#48987)
  - Package libgdk_pixbuf_xlib (#47753)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Version 1.3.1
  - move back to /usr
  - Remove gtk-config.1 manpage from build since
    it conflicts with gtk+-devel. When we go to 
    gtk+ gtk+1.2 setup, we should add it back


author: Marcela Mašláňová <mmaslano@redhat.com> - 0.14-8
changelog:
  - XML-LibXML use triggers for XML::SAX update. Deleting of settings in
   ParserDetails.ini is solved by post and preun part, which create backup.
  - Resolves: rhbz#536819


author: Marcela Mašláňová <mmaslano@redhat.com> - 0.14-7
changelog:
  - post scriptlet needs to check whether the file is installed. When it isn't,
   then it's needed a call for adding PurePerl parser
   http://perl-xml.sourceforge.net/faq/#parserdetails.ini
  - Resolves: rhbz#536819


author: Marcela Mašláňová <mmaslano@redhat.com> - 0.14-6
changelog:
  - 289061 add post and preun part which should fix ghost problem
  - 475250 upstream patch http://rt.cpan.org/Public/Bug/Display.html?id=26588
  - Resolves: rhbz#475250, rhbz#289061


author: Ville Skyttä <ville.skytta at iki.fi> - 0.12-7
changelog:
  - #121167
  - Handle ParserDetails.ini parser registration.
  - Require perl(:MODULE_COMPAT_*).
  - Own installed directories.


author: Tom Lane <tgl@redhat.com> 08.01.0200-2
changelog:
  - Change library name back to psqlodbc.so, because it appears that upstream
    will revert to that name in next release; no point in thrashing the name.
  - Include documentation files unaccountably omitted before (bug #184158)


author: Tom Lane <tgl@redhat.com> 08.01.0200-1
changelog:
  - Update to version 08.01.0200.
  - Upstream now calls the library psqlodbcw.so ... add a symlink to avoid
    breaking existing odbc configuration files.


author: Milan Broz <mbroz@redhat.com> - 2.02.88-6
changelog:
  - Fix lvm1 format snapshot handling.
  - Make memory lock error message clearer.
    Resolves: #758833 #769053


author: Milan Broz <mbroz@redhat.com> - 2.02.88-5
changelog:
  - Fix mirror log conversion and vgsplit for mirrored logs.
  - Fix dmeventd automatic snapshot extension.
    Resolves: #754598 #755762 #754198


author: Milan Broz <mbroz@redhat.com> - 2.02.88-3
changelog:
  - Add ability to extend mirrors with '--nosync' option.
  - Fix extent-count divisibility requirements for striped mirrors.
    Resolves: #537369 #749650


author: Milan Broz <mbroz@redhat.com> - 2.02.88-2
changelog:
  - Fix redundant dmevent snapshot monitoring messages.
  - Fix lvextend and fsadm ext4 resize.
    Related: #746302
    Resolves: #707056 #708444 #720971


author: Milan Broz <mbroz@redhat.com> - 2.02.88-1
changelog:
  - Update to latest upstream release, all fixes and enhancements
    detailed in WHATS_NEW file.
    Resolves: #746302  #707779 #719760 #636991 #706036 #745522
    Resolves: #711185  #654447 #523324 #575967


author: Milan Broz <mbroz@redhat.com> - 2.02.84-1
changelog:
  - Update to latest upstream release, all fixes and enhancements
    detailed in WHATS_NEW file.
    Resolves: #680961 #672816 #673083 #671459 #433768 #656394
    Resolves: #427298 #653643 #667174 #659264 #643500 #640101
    Resolves: #644079 #640051 #501437


author: Milan Broz <mbroz@redhat.com> - 2.02.74-6
changelog:
  - Always use O_DIRECT when opening block devices in filters.
  - Do not scan devices unnecessarily in dev_reset_error_count().
  - Do not print lock warnings with --ignorelockingfailure.
    Resolves: #672816 #673083 #671459


author: Milan Broz <mbroz@redhat.com> - 2.02.74-2
changelog:
  - Fix error message if unable to activate lv due to tags.
  - Fix online resize in fsadm to not try to run filesystem check.
    Resolves #486994 #643365
    Related: #649710 #651349


author: Milan Broz <mbroz@redhat.com> - 2.02.74-1
changelog:
  - Convey need for snapshot-merge target in lvconvert error message.
  - Give correct error message when creating a too-small snapshot.
  - Implement vgextend --restoremissing.
  - Fix --force and --yes flags in lvconvert.
  - Fix possible data corruption when using fsadm and resizing device.
  - Allow to set limit for repeated access to broken devices.
  - Fix hang when repairing a mirrored-log that had both devs fail.
    Resolves: #638283 #587063 #537913 #252420 #642055 #643365
    Resolves: #637936


author: Milan Broz <mbroz@redhat.com> - 2.02.73-1
changelog:
  - Update to latest upstream release, all fixes and enhancements
    detailed in WHATS_NEW file.
  - CVE-2010-2526: Fix insecurity when communicating between lvm2 and clvmd.
    Resolves: #627541 #589805 #474914 #585328 #588441 #568138
    Resolves: #232499 #235095 #547895 #616150 #486994 #560105
    Resolves: #560111 #590017 #549174 #559351 #582330 #627701
    Resolves: #564516 #617972 #552721 #592428


author: Milan Broz <mbroz@redhat.com> - 2.02.56-12
changelog:
  - Fix initialisation of logging to file to not cause boot failure.
  - Fix lvchange --refresh to require partial flag if PVs are missing.
    Resolves: #592967 #598886


author: Milan Broz <mbroz@redhat.com> - 2.02.56-10
changelog:
  - Fix incorrect removal of symlinks after LV deactivation fails.
  - Only do one full device scan during each read of text format metadata.
  - Disallow primary mirror image removal when mirror is not in-sync.
    Resolves: #580486 #575173 #571963 #581611


author: Milan Broz <mbroz@redhat.com> - 2.02.56-9
changelog:
  - Mask LCK_HOLD flag in cluster VG locks for compatibility reasons.
  - Always use blocking lock for VGs and orphan locks.
    Resolves: #574219 #578413


author: Milan Broz <mbroz@redhat.com> - 2.02.56-7
changelog:
  - Make mirror repair exit with success when no action is needed.
  - Fix inappropriate second resync when adding mimage to core-logged mirror.
    Resolves: #562004 #510526


author: Milan Broz <mbroz@redhat.com> - 2.02.56-6
changelog:
  - Fix dmeventd crash if both snapshot and mirror monitoring DSO are used.
  - Fix pvmove abort to be cluster-aware when temporary mirror activation fails.
    Resolves: #538571 #557104


author: Milan Broz <mbroz@redhat.com> - 2.02.56-3
changelog:
  - Fix missing flag device handling.
  - Revert the dmeventd mirror repair logic to use vgreduce (548223).
    Resolves: #537954 #543225


author: Milan Broz <mbroz@redhat.com> - 2.02.56-2
changelog:
  - Fix problems with mirror repair handling.
  - Fix cluster locking flags.
    Related: #536817
    Resolves: #543146 #500899


author: Milan Broz <mbroz@redhat.com> - 2.02.55-1
changelog:
  - Update to latest upstream release, all fixes and enhancements
    detailed in WHATS_NEW file.
    Related: #536817
    Resolves: #537942 #537954 #537947


author: Milan Broz <mbroz@redhat.com> - 2.02.54-1
changelog:
  - Update to latest upstream release, all fixes and enhancements
    detailed in WHATS_NEW file.
    Resolves: #536817 #186437 #463272 #481793 #500177 #529668


author: Milan Broz <mbroz@redhat.com> - 2.02.46-8
changelog:
  - Reintruduce old mirror repair behaviour.
  - Fix various memory leaks in command context manipulation 
  - Enhance and fix various problems in vgimportclone.
    Resolves: #504699 #504877


author: Milan Broz <mbroz@redhat.com> - 2.02.46-7
changelog:
  - Ignore suspended devices during repair.
  - Call vgreduce --removemissing automatically.
    Resolves: #505604


author: Milan Broz <mbroz@redhat.com> - 2.02.46-4
changelog:
  - Fix virtual origin snapshot manipulation.
  - Implement mirror repair policies.
    Resolves: #249478 #503708


author: Milan Broz <mbroz@redhat.com> - 2.02.46-3
changelog:
  - Fix crash when calculating readahead on missing device in vgreduce.
  - Fix mirror log allocation when smallest PV has only 1 extent.
    Resolves: #502899 #502671


author: Milan Broz <mbroz@redhat.com> - 2.02.46-1
changelog:
  - Update to latest upstream release, all fixes and enhancements
    detailed in WHATS_NEW file.
    Resolves: #470560 #488059 #490298 #493311 #494414 #220567
    Resolves: #477040 #431760 #454645 #476117 #501473 #501756


author: Milan Broz <mbroz@redhat.com> - 2.02.40-2
changelog:
  - Fix vgreduce --force --removemissing hangling.
  - Do not print warning for old stripe_filler default setting.


author: Milan Broz <mbroz@redhat.com> - 2.02.39-1
changelog:
  - Update to latest upstream release.
    Resolves: #453753 #452813 #447905 #446228 #444795 #443419
    Resolves: #443060 #428005


author: Milan Broz <mbroz@redhat.com> - 2.02.32-4
changelog:
  - Fix vgsplit locking of new VG.
  - Fix another allocation bug with clvmd and large node IDs.
    Resolves: #438434 #438249


author: Milan Broz <mbroz@redhat.com> - 2.02.30-1
changelog:
  - Update to latest upstream release.
    Resolves: #252150 #210724 #245563 #363931 #291411 #246115
    Resolves: #427360 #421191 #180436 #220568 #429122 #429124
    Resolves: #429118 #427294 #251992


author: Milan Broz <mbroz@redhat.com> - 2.02.26-2
changelog:
  - Fix spec to create /etc/lvm/cache correctly.
  - Fix warning for unsupported mirror configuration.
  - Fix lvm2-monitor initscript to not display some invalid errors.
    Resolves: #246272 #219189 #245174


author: Milan Broz <mbroz@redhat.com> - 2.02.26-1
changelog:
  - Update to latest upstream release.
  - Add conflict with lvm2-cluster package from different update.
    Resolves: #210365 #224468 #232238 #203745 
    Resolves: #244791 #244792 #244793 #244794 #244795 #244796


author: Alasdair Kergon <agk@redhat.com> - 2.02.12-3
changelog:
  - Remove no-longer-used ldconfig from lvm2-cluster and fix lvmconf
    to cope without the shared library.
    Resolves: #211632


author: Alasdair Kergon <agk@redhat.com> - 2.02.12-1.0
changelog:
  - Change package suffix to use dist variable.
  - Fix clustered flag propagation in vgsplit and require resizeable flag.
  - Fix lvchange to keep activation state when changing LV minor with --force.
  - Fall back to internal locking if external locking lib is missing or fails.
  - Fix pvdisplay to use vg_read() for non-orphans.


author: Alasdair Kergon <agk@redhat.com> - 2.02.11-1.0
changelog:
  - Improve allocation policy for mirrors.
  - Fix two rare vg_read segmentation faults.
  - Accept size as percentages in lvcreate and lvresize.
  - Fix PE size calculations for small PEs.


author: Alasdair Kergon <agk@redhat.com> - 2.02.06-5.0
changelog:
  - Fix monitoring shutdown when devire removed. (194125)
  - Prevent renaming of clustered mirrors for now. (195610)


author: Alasdair Kergon <agk@redhat.com> - 2.02.06-4.0
changelog:
  - Fix PV tools to include orphaned PVs in default output again. (195276)
  - Avoid clvm 'unaligned access' error on some archs. (194626, lost)
  - Fixes and workarounds for mirroring. (195476, 197268)


author: Alasdair Kergon <agk@redhat.com> - 2.02.01-1.0
changelog:
  - Fix lvdisplay command line for snapshots; fix open file promotion
    to read/write; fix an lvcreate error path.
  - Update package dependencies.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-1.0
changelog:
  - Improve detection of external changes affecting internal cache.
  - Add clustered VG attribute.
  - Suppress rmdir opendir error message.


author: Alasdair Kergon <agk@redhat.com> - 2.00.24-1
changelog:
  - More upstream fixes.  (Always check WHATS_NEW file for details.)
  - Add requested BuildRequires. [bz 124916, 132408]


author: Jeremy Katz <katzj@redhat.com> - 2.00.20-2
changelog:
  - add patch for iSeries viodasd support
  - add patch to check file type using stat(2) if d_type == DT_UNKNOWN (#129674)


author: Alasdair Kergon <agk@redhat.com> 2.00.12-1
changelog:
  - Install default /etc/lvm/lvm.conf.
  - Move non-static binaries to /usr/sbin.
  - Add temporary links in /sbin to lvm.static until rc.sysinit gets updated.


author: Alasdair Kergon <agk@redhat.com> 2.00.10-1
changelog:
  - Update to version 2.00.10, which incorporates the RH-specific patches
    and includes various fixes and enhancements detailed in WHATS_NEW.


author: Jeremy Katz <katzj@redhat.com> 2.00.08-5
changelog:
  - Fix sysfs patch to find sysfs
  - Take patch from dwalsh and tweak a little for setting SELinux contexts on
    device node creation and also do it on the symlink creation.  
    Part of this should probably be pushed down to device-mapper instead


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - add hardlink man page
  - add -h option
  - use _sbindir instead of /usr/sbin directly
  - don't warn because of uninitialized variable
  - spec cleanup


author: Adam Jackson <ajax@redhat.com> 1.4.13-5
changelog:
  - mga-1.4.13-g200se-12x7-bug.patch: Fix (wrong) selection of 1280x768 on
    G200SE when no monitor connected (#735713)


author: Adam Jackson <ajax@redhat.com> 1.4.10-5
changelog:
  - what-the-revert-meant-to-do.patch: Fix up pitch misestimation when better
    modes are filtered away due to hardware limitations. (#508039)


author: Adam Jackson <ajax@redhat.com> 1.4.10-4
changelog:
  - mga-1.4.10-g200se-24-not-32.patch: Prefer 24bpp on G200SE-A due to
    scarce memory bandwidth. (#508039)


author: Adam Jackson <ajax@redhat.com> 1.4.10-1
changelog:
  - Update to 1.4.10 (#479919)
  - mga-1.4.10-shadowfb.patch: Force shadowfb on lowmem G200SE to avoid
    XAA offscreen memory accounting bugs. (#479919)


author: Adam Jackson <ajax@redhat.com> 1.4.2-10
changelog:
  - mga-1.4.2-g200-ev-wb.patch: Even more PLL tweaking for G200SE, only seems to
    be stable when P is a power of two. (#474168)


author: Adam Jackson <ajax@redhat.com> 1.4.2-8
changelog:
  - mga-1.4.2-g200-ev-wb.patch: Add support for G200EV and G200WB, and fix
    DDC on all G200[A-Z][A-Z] parts. (#445497)


author: Adam Jackson <ajax@redhat.com> 1.4.2-6
changelog:
  - mga-1.4.2-g200se-default-mode.patch: Tweak for G200SE to use the settings
    from the default Display subsection in xorg.conf, so that changes from
    s-c-d will make their way into the driver. (#228705)


author: Adam Jackson <ajax@redhat.com> 1.4.2-5.el5
changelog:
  - mga-1.4.2-unbreak-dri.patch: Fix a boolean logic error from the G200SE
    merge that broke DRI on, well, everything else. (#217579)


author: Adam Jackson <ajax@redhat.com> 1.4.2-4.el5
changelog:
  - mga-1.4.2-g200se-default-mode.patch: Fix defaults for G200SE to fit
    1024x768x16 @ 60Hz. (#215949)


author: Adam Jackson <ajax@redhat.com> 1.4.2-3.el5
changelog:
  - mga-1.4.2-g200se-crash.patch: Fix hangs when saving and restoring video.
  - mga-1.4.2-g200se-disable-mtrr.patch: Disable MTRR for PCIE G200SEs.


author: Adam Jackson <ajackson@redhat.com> 1.4.1-4
changelog:
  - mga.xinf updates.  Add G200SE cards, remove Impression and Mistral IDs
    (since they do not and never have worked), and comment each line with
    the appropriate card name.


author: Mike A. Harris <mharris@redhat.com> 1.4.1-3
changelog:
  - Added with_dri conditionalization (not yet working for non-dri case).
  - Added "BuildRequires: libdrm-devel >= 2.0-1" for (#192358).
  - Added "BuildRequires: mesa-libGL-devel >= 6.4-4".
  - Bumped sdk dep to pick up proto-devel indirectly.


author: Mike A. Harris <mharris@redhat.com> 1.2.1.2-1
changelog:
  - Updated xorg-x11-drv-mga to version 1.2.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.2.0.1-1
changelog:
  - Updated xorg-x11-drv-mga to version 1.2.0.1 from X11R7 RC1
  - Fix *.la file removal.
  - Remove hardware specific {_bindir}/stormdwg utility.


author: Dan Williams <dcbw@redhat.com> - 1.5.1-2
changelog:
  - Fix off-by-one when searching for language specification files
      which breaks syntax hilighting.  Already fixed upstream.


author: Warren Togami <wtogami@redhat.com> 1.0.0-2
changelog:
  - BR gnome-vfs2-devel libxml2-devel intltool gtk-doc gtk2-devel libgnomeprint22-devel 
    libgnomeprintui22-devel gettext


author: Jakub Jelinek <jakub@redhat.com> 3.2.3-57
changelog:
  - in 64-bit builds remove 32-bit /usr/lib/lib* libraries from the
    buildroots (and similarly on 32-bit builds remove 64-bit /usr/lib64/lib*)
    before AutoReq generation


author: Jakub Jelinek <jakub@redhat.com> 3.2.3-54.fc5
changelog:
  - rebuilt with new gcc, massage $RPM_OPT_FLAGS, as GCC 3.2.3-RH doesn't
    grok -fstack-protector etc.
  - make sure glibc and glibc-devel for all multilib arches is installed
    for building (#170601)
  - fix compat-libstdc++-33 %description (#171684)
  - disable os_defines.h changes introduced in 3.2.3-45 also for
    IBM xlC compiler (#146196, IT#75174)
  - fix pushdecl_class_level for OVERLOADs (Mark Mitchell,
    Alexandre Oliva, #156185)
  - reword diagnostics about unresolved overloaded type
    (Alexandre Oliva, #156291, IT#70101)
  - fix x86_64 compiler hang when passing object with 3+ base classes by value
    (Zak Kipling, PR target/18300, #164421, #171940, IT#76454)
  - predefine __GNUC_RH_RELEASE__ macro to rpm's %{release} (Alexandre Oliva)
  - weakref attribute support, use it in <bits/gthr.h> various C++ headers
    are using (Alexandre Oliva, #165728, IT#73356)
  - don't warn in templates about missing return if return type is dependent
    on template parameters (Alexandre Oliva, PR c++/13106, #169044, IT#77857)
  - ensure ppc64 keeps stack 16 byte aligned even with dynamic allocation
    (alloca, VLAs), but don't rely on it in the generated code
    (Alexandre Oliva, #169111, IT#76136)
  - fix invalid CC clobberation on i?86/x86_64 (Eric Botcazou,
    PR optimization/12799, #169654)
  - don't assume hard frame pointer register is STACK_BOUNDARY aligned
    if frame pointer isn't used and the register has been reused
    for something else (Eric Botcazou, PR optimization/13041, #169845)
  - fix libstdc++ seekoff bug (Scott Snyder, #151692, IT#66065,
    PR libstdc++/9659)
  - don't use .symver directives in libstdc++.a, instead
    provide hidden aliases for the obsolete symbols (#151732, IT#64710)
  - fix a strength reduction bug (Jan Hubicka, #149250, IT#66328)
  - fix xchgb constraints on i386 (#156104, IT#69633, PR target/19005)
  - change __cxa_demangle to match cxx-abi change
    http://www.codesourcery.com/archives/cxx-abi-dev/msg01877.html
    (Jason Merrill, #133406)
  - fix ICE on invalid use of template without arguments as primary
    expression (Mark Mitchell, #149492, PR c++/10558)
  - fix c++filt/__cxa_demangle segfault on invalidly mangled names
    generated by G++ 3.4 (Ian Lance Taylor, #145781, PR c++/16240)
  - disable os_defines.h changes introduced in 3.2.3-45 for non-GCC
    compilers (#144725, #146196)
  - fix debugging information in in-charge constructors and
    destructors (Mark Mitchell, #146416, PR debug/11098)
  - fix delete_null_pointer_checks on non-cc0 targets (Alan Modra, #141694,
    IT#54408, PR rtl-optimization/14279)
  - fix some reload related issues on ppc64 (David Edelsohn, #139099,
    IT#45622, PRs target/16239, target/8480, optimization/8328)
  - fix ICE in regenerate_decl_from_template (Mark Mitchell, #142418,
    PR c++/7053)
  - fix ICE when printing jump to case label... crosses initialization
    warning (Gabriel Dos Reis, #140830, PR c++/7566)
  - fix corner case in passing by invisible reference (Alexandre Oliva,
    IT#54891, #141270)
  - fix ICE on code that uses value of reference in reference's initializer
    (Alexandre Oliva, #141274, IT#36304)
  - avoid moving jumptable away from corresponding jump even if there is an
    intervening barrier (Josef Zlomek, #131378)
  - with -D_GLIBCXX_FULLY_DYNAMIC_STRING, STL should now avoid
    _S_empty_rep_storage (Paolo Carlini, #131030, IT#45103, PR libstdc++/16612)
  - document -Winline only works for languages that use RTL inliner (Java,
    Ada, #141272, IT#28331)


author: Peter Schiffer <pschiffe@redhat.com> - 2.39-18
changelog:
  - resolves: #640299
    db(3) refers to nonexistent dbopen(3) manpage
  - resolves: #698691
    'man rt_sigprocmask' documentation error
  - resolves: #699701
    Remove documentation for "order" keyword in /etc/host.conf manpage
  - resolves: #741713
    bootparam man page not up-to-date under RHEL 5
  - resolves: #650985
    Interaction of close() and recv() in different threads never documented


author: Ivana Hutarova Varekova <varekova@redhat.com> - 2.39-17
changelog:
  - Related: #530570
    change the variable name
  - Related: #544142
    add the missing word
  - Related: #566303
    fix auto-propagate description


author: Ivana Hutarova Varekova <varekova@redhat.com> - 2.39-16
changelog:
  - Resolves: #519186
    fix proc man page (priority tag)
  - Resolves: #530570
    fix rt_sigprocmask page
  - Resolves: #532634
    change obsolete /usr/src/linux to /usr/share/doc/kernel-doc-2.6.18/Documentation
  - Resolves: #544142
    add to iconv(1) man page missing options (thanks Moritoshi Oshiro)
  - Resolves: #566303
    add max-db-size and auto-propagate description to nscd.conf(5)
  - Resolves: #572194
    add the description of RUSAGE_THREAD to getrusage(2)
  - Resolves: #582119
    removed unimplemented functions from 1p


author: Ivana Varekova <varekova@redhat.com> - 2.39-15
changelog:
  - Related: #522761
    fix some typos
  - Related: #517309
    add the description of --version and -c
  - Related: #497197
    change the description


author: Ivana Varekova <varekova@redhat.com> - 2.39-13
changelog:
  - Resolves: #443059
    add short note about /usr/bin/time x bash time confusion
  - Resolves: #452290
    add the description of the 42th parameter of /proc/[pid]/stat
  - Resolves: #456219
    fix the links to documentation
  - Resolves: #468897
    add posix manual notice to posix man-pages
  - Resolves: #471176
    add additional note to LOG_KERN in syslog(3) man-page
  - Resolves: #474238
    add pthread_setaffinity_np(3) man page
  - Resolves: #497197
    fix the description of /proc/sys/fs/file-nr file
  - Resolves: #515346
    fix typo in gai.conf(5) man-page
  - Resolves: #517309
    add --version option to zdump(8) man page
  - Resolves: #518984
    fix statfs(2) man page
  - Resolves: #522761
    fix nsswitch.conf(5) man page
  - Resolves: #524246
    fix ip(7) man page
  - Resolves: #527196
    proc(5) fix info about the restricton in /proc/sys/fs/file-max file


author: Ivana Varekova <varekova@redhat.com> - 2.39-11
changelog:
  - Resolves: #444540
    fix rint.3 man page
  - Resolves: #248405
    fix open.2 man page
  - Resolves: #450186
    add notification to malloc_hook.3
  - Resolves: #439199
    add scopev4 description to gai.conf.5
  - Resolves: #436398
    man pages imply STREAMS is implemented
  - Resolves: #402181
    improve gethostid.2 man-page
  - Resolves: #392401
    fix connect.2 man-page
  - Resolves: #357921
    update intro.2 man page, add _syscall.2 man page
  - Resolves: #449156
    update ptrace.2 man page - thanks Anoop
  - Resolves: #361611
    update proc.5 man page


author: Stepan Kasal <skasal@redhat.com> - 2.39-10
changelog:
  - fix inconsistent arg names in splice.2
  - Resolves: #232172
  - add man-pages-2.43-swapon.patch
  - Resolves: 222493
  - Remove the deprecated pciconfig_*.2 man pages.
  - Resolves: #219827
  - Add man-pages-2.39-_syscallX.patch, macros _syscall0 et al. are no longer
    available.
  - Resolves: #230554 and 235206
  - Add man-pages-2.39-rt_sigprocmask.patch
  - Resolves: #219074


author: Ivana Varekova <varekova@redhat.com> 2.39-6
changelog:
  - add getunwind.2, kexec_load.2, move_pages.2, perfmonctl.2, 
    spu_create.2, spufs.2, spu_run.2 and  vserver.2 man pages


author: Ivana Varekova <varekova@redhat.com> 2.39-4
changelog:
  - add (get/set)_robust_list.2 man pages
  - add add_key.2, keyctl.2, request_key.2 man pages 
      (removed from keyutils-libs-devel package)
  - add tux.2 man page
      (removed from tux package)


author: Ivana Varekova <varekova@redhat.com> 2.36-1
changelog:
  - add nscd_conf options (nscd_conf.patch)
  - added {create,query}_module.2, get_kernel_syms.2 man-pages 
  - added nscd, getrlimit, libaio and write patch
  - remove sigprocmask patch
  - update to 2.36


author: Ivana Varekova <varekova@redhat.com> 2.07-6
changelog:
  - man pages updated for new audit system (added missing man-pages 
  of some syscalls) (see bug 159225)


author: Jiri Ryska <jryska@redhat.com> 2.05-1
changelog:
  - update to 2.05
  - atanh(3) fix
  - issue(5) fix
  - ldd(1) fix
  - removed man1p/{compress,uncompress,renice}.1p


author: Jiri Ryska <jryska@redhat.com> 1.67-7
changelog:
  - io_setup() and io_destroy() pages now refers to header file
  - fixed types for struct shmid_ds in shmget(2) and shmctl(2)
  - fixed pages for readv(2) and writev(2)


author: Jindrich Novy <jnovy@redhat.com> 1.67-6
changelog:
  - unify fs.5 patches together to get rid of the bogus
    fs.5.orig.gz shipped among man5 pages
  - bump release to 6 to avoid conflicts with RHEL4/FC3 man-pages


author: Adrian Havill <havill@redhat.com> 1.67-2
changelog:
  - updated to latest
  - getrpcent/setrpcent typo (#73836)
  - add new resolver.5 page (#126557)
  - add SHM_HUGETLB option to shmget (#128837)


author: Adrian Havill <havill@redhat.com> 1.60-4
changelog:
  - transliterated ALL pages with latin-1 characters that would be
    displayed as either a fallback from a ascii-superset locale or
    from the POSIX locale into ascii (according to glibc transliteration
    data for locale "en"). pages with non-ascii are moved into the "en"
    locale. (#103214)


author: Adrian Havill <havill@redhat.com> 1.60-1
changelog:
  - bumped version, removed no longer needed patches
  - added #define for re_comp() and re_exec() (#79703)
  - fixed typo in Era format specifier (#80025)
  - fixed ftell info for fopen with mode "a+" (#81359)
  - fixed prototype for shmget() (#86258)
  - fixed spelling in wait.2 (#86450)
  - obsoleted _init and _fini in dlopen() (#88408)
  - fixed and merged double ext3 descriptions (#103198)
  - issue to refer to mingetty (#86248)
  - synced man page with actual ld params (#97176)


author: Ernie Petrides <petrides@redhat.com>
changelog:
  - Modify mlock.2, mlockall.2, and shmctl.2 for change to locking
    permission semantics made in kernel's linux-2.4.21-mlock.patch.


author: Trond Eivind Glomsrød <teg@redhat.com> 1.48-2
changelog:
  - Remove getipnodebyname, getipnodebyname, freehostent - they were
    only briefly part of a glibc devel version (#62646)


author: Trond Eivind Glomsrød <teg@redhat.com> 1.41-1
changelog:
  - 1.41
  - Remove bug section in llseek.2, which claimed ext2 don't support
    files bigger than 2 GB (#54569)


author: Trond Eivind Glomsrød <teg@redhat.com> 1.39-2
changelog:
  - New strptime.3, from the ftp site. Matches glibc better.
  - Fix missing .br in netdevices.7 (#53091)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Remove diff.1 - let diffutils include it instead
  - Remove capget.2 - it's included in libcap
  - Keep resolv.conf.5 - it's useful on systems without bind packages
  - Fix bootparam.7 (patch from Tim Waugh (twaugh@redhat.com)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - correct the URL for unicode in the charset manpage (#34291)
  - roff fixes
  - redo iconv patch, so we don't get a .orig from patch because of
    a two line offset


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 1.33
  - obsolete some old, now included patches
  - remove netman-cvs, it's now older than the mainstream


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't delete the man pages for dlopen() and friends, 
    they are no longer part of another package
  - include man pages for ld*


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fixed bad header specification (#15364)
  - removed obsolete patches from package
  - updated the rest


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %{_mandir) instead of /usr/man
  - verify and fix bug in mmap man page (#7382)
  - verify and fix missing data in recvfrom man page (#1736)
  - verify and fix missing data in putw man page (#10104)
  - fixed sendfile(2) man page (#5599)
  - fixed tzset man page (#11623)


author: Ville Skyttä <ville.skytta at iki.fi> - 1.22-2
changelog:
  - 1.22, include test case for rt.cpan.org #7528 patch.
  - Patch to mute stdout noise from ip_reverse().


author: Jan Iven <jan.iven@cern.ch> - 1.3.4-6test.cern
changelog:
  - whitelist "fipscheck" hmac files
  - turn off network port checks that give FPs
  - minor tweaks for unhide output and patterns


author: Jan Iven <jan.iven@cern.ch> - 1.3.4-5test.cern
changelog:
  - handle osinfo changes automatically, instead of carping
  - unhide: multithreaded zombies don't show up in "ps axH" (but do in "ps ax", so are not hidden)
  - network: only warn for connections *to* evil ports, not *from* them.


author: Jan Iven <jan.iven@cern.ch> - 1.3.4-3test.cern
changelog:
  - fix xinetd whitelisting bug; still needs "properties" test to be run before
  - add "uname" and rkhunter version to warning mail


author: Jan Iven <jan.iven@cern.ch> - 1.3.4-2test.cern
changelog:
  - updated/patched "unhide"
  - xinetd: trust RPM-added services
  - missing "default" hashes - fall back to RPM
  - accept stricter SSH-for-root configs without warning.
  - rename cron job to "zz_" to give prelink a chance to run
  - keep default config and use CERN-specific only for cronjob. and only at CERN.


author: Jan Iven <jan.iven@cern.ch> - 1.3.2-2.cern
changelog:
  - new patches for hash whitelisting, bi-arch
  - enable syslog reporting, fix "mail" reporting
  - disable suspscan (too many FP)


author: Greg Houlette - 1.1.5
changelog:
  - Changed the install procedure eliminating the specification of
    destination filenames (only needed if you are renaming during install)
  - Changed the permissions for documentation files (root only overkill)
  - Added the installation of the rkhunter Man Page
  - Added the installation of the programs_{bad, good}.dat database files
  - Added the installation of the LICENSE documentation file
  - Added the chmod for root only to the /var/rkhunter/db directory


author: Craig Orsinger (cjo) <cjorsinger@earthlink.net>
changelog:
  - version 1.1.0-1.cjo
  - changed installation in accordance with new rootkit installation
    procedure
  - changed installation root to conform to LSB. Use standard macros.
  - added recursive remove of old build root as prep for install phase


author: Doncho N. Gunchev - 1.0.9-0.mr700
changelog:
  - dropped Requires: perl - rkhunter works without it 
  - dropped the bash alignpatch (check the source or contact me)
  - various file mode fixes (.../tmp/, *.db)
  - optimized the %files section - any new files in the
    current dirs will be fine - just %{__install} them.


author: Doncho N. Gunchev - 1.0.6-1.mr700
changelog:
  - added missing /usr/local/rkhunter/db/md5blacklist.dat
  - patched to align results in --cronjob, I think rpm based
    distros have symlink /bin/sh -> /bin/bash
  - added --with/--without alignpatch for conditional builds
    (in case previous patch breaks something)


author: Mike A. Harris <mharris@redhat.com> 0.5.0.4-1
changelog:
  - Updated xorg-x11-drv-ark to version 0.5.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.5.0-1
changelog:
  - Set "ExclusiveArch: i386 i486 i586 i686 pentium3 pentium4 athlon" to limit drivers to what is sensible on each
    architecture.
  - Update BuildRoot to use Fedora Packaging Guidelines


author: Karel Zak <kzak@redhat.com> 2.13-0.57
changelog:
  - fix #646300 - login doesn't update /var/run/utmp properly
  - fix #726572 - import missing fsfreeze into util-linux 
  - fix #678430 - fdisk should not report error on 1gB LUNs
  - fix #699639 - mount man page is missing support for ext4/xfs
  - fix #650937 - blockdev man page missing information
  - fix #678407 - ipcs and ipcrm in wrong man section


author: Karel Zak <kzak@redhat.com> 2.13-0.55
changelog:
  - fix #245578 - "remote" PAM configuration inits the keyring at an inconvenient time
  - fix #612423 - /etc/udev/rules.d/60-raw.rules gets trashed by util-linux on update
  - fix #559302 - spurious mount warning when /bin/mount not setuid root


author: Karel Zak <kzak@redhat.com> 2.13-0.54
changelog:
  - fix #448919 - fdisk -l shows wrong partition name on device-mapper-multipath devices
  - fix #465911 - ipcs returns 0 when some errors occured. 
  - fix #470497 - blockdev man page missing information
  - fix #475509 - when executing 'mount -a', a filesystem is mounted duplicative
  - fix #488192 - login: access("/nfs-home/.hushlogin", R_OK) = -1 EACCES
  - fix #490693 - Add utempter support to "script"
  - fix #495192 - login command does not allow for switching users
  - fix #502639 - SR#1919756-remove sleep() from fdisk
  - fix #565946 - sfdisk does not ensure writes make it to disk
  - fix #513369 - flock segfaults when file name is not given
  - fix #515149 - man mount(8) doesn't describe all vfat options for non-UTF8 locale
  - fix #568194 - remount of bind mounts is not properly documented
  - fix #458055 - "cal -3" generates improperly formatted output


author: Karel Zak <kzak@redhat.com> 2.13-0.50
changelog:
  - re-fix #240131 - mkfs:bug in mkfs man page (fix typo)
  - re-fix #427183 - in repair mode, mount gives false information
  - re-fix #446648 - obsolete info in fdisk(8) man page (fix typo)


author: Karel Zak <kzak@redhat.com> 2.13-0.48
changelog:
  - fix #203869 - RHEL5: login segfaults on EOF
  - fix #456378 - RHEL5: audit log injection attack via login
  - fix #449777 - /usr/bin/logger cannot be used when /usr non-root partition
  - fix #249438 - man fstab refers to fstab-sync
  - fix #240131 - mkfs:bug in mkfs man page
  - fix #446648 - obsolete info in fdisk(8) man page
  - fix #447265 - VMware fdisk partitions
  - fix #354791 - blockdev command calls the blkpg ioctl with a wrong data structure
  - fix #444650 - mkswap defaults to v0 format on ppc64
  - fix #458437 - "swapon -a" does not complain about missing devices
  - fix #449143 - fdisk fails to warn on large disks
  - fix #446971 - sfdisk issue on large hard drives
  - fix #239721 - script: result of 'COMMAND' cannot be logged in the file typescript
  - fix #427183 - in repair mode, mount gives false information


author: Karel Zak <kzak@redhat.com> 2.13-0.46
changelog:
  - fix #324471 - CVE-2007-5191 util-linux (u)mount doesn't drop privileges
                 properly when calling helpers


author: Karel Zak <kzak@redhat.com> 2.13-0.45
changelog:
  - fix #237659 - add -r option to losetup to create a read-only loop
  - fix #235495 - mount -f does not work with NFS-mounted file system
  - fix #234303 - src.rpm does't build
  - fix #228731 - sfdisk doesn't support DM-MP device (add default heads and sectors)
  - fix #231192 - ipcs is not printing correct values on pLinux
  - fix #245533 - translation files exist, but are not being used


author: Karel Zak <kzak@redhat.com> 2.13-0.43.3
changelog:
  - fix #219569 - smbfs -> cifs (upgrade from -pre6 to -pre7 upstream version)
  - fix #218915 - fdisk -b 4K
  - remove unused patches


author: Karel Zak <kzak@redhat.com> 2.13-0.43.1
changelog:
  - fix #211827 - Can't mount with additional contexts
  - fix #213127 - mount --make-unbindable does not work
  - fix #216489 - SCHED_BATCH option missing in chrt
  - fix #216712 - issues with raw device support
    (disable raw0 usage, move the raw command to /bin, update man page)
  - fix #216664 - we need to the raw script and configuration file


author: Karel Zak <kzak@redhat.com> 2.13-0.43
changelog:
  - fix #209911 - losetup.8 updated (use dm-crypt rather than deprecated cryptoloop)
  - fix #210338 - spurious error from '/bin/login -h $PHONENUMBER' (bug in IPv6 patch)
  - fix #208634 - mkswap "works" without warning on a mounted device


author: Karel Zak <kzak@redhat.com> 2.13-0.42
changelog:
  - remove obsolete NFS code and patches (we use /sbin/mount.nfs
    and /sbin/umount.nfs from nfs-utils now)
  - move nfs.5 to nfs-utils


author: Karel Zak <kzak@redhat.com> 2.13-0.41
changelog:
  - fix #205038 - mount not allowing sloppy option (exports "-s"
    to external /sbin/mount.nfs(4) calls) 
  - fix minor bug in util-linux-2.13-mount-twiceloop.patch
  - fix #188193- util-linux should provide plugin infrastructure for HAL


author: Karel Zak <kzak@redhat.com> 2.13-0.40
changelog:
  - fix Makefile.am in util-linux-2.13-mount-context.patch
  - fix #201343 - pam_securetty requires known user to work
                  (split PAM login configuration to two files)
  - fix #203358 - change location of taskset binary to allow for early affinity work


author: Karel Zak <kzak@redhat.com> 2.13-0.32
changelog:
  - add IPv6 support to the login command (patch by Milan Zazrivec)
  - fix #198626 - add keyinit instructions to the login PAM script 
    (patch by David Howells)


author: Karel Zak <kzak@redhat.com> 2.13-0.25
changelog:
  - fix #187014 - umount segfaults for normal user
  - fix #183446 - cal not UTF-8-aware
  - fix #186915 - mount does not translate SELIinux context options though libselinux
  - fix #185500 - Need man page entry for -o context= mount option
  - fix #152579 - missing info about /etc/mtab and /proc/mounts mismatch
  - fix #183890 - missing info about possible ioctl() and fcntl() problems on NFS filesystem
  - fix #191230 - using mount --move results in wrong data in /etc/mtab
  - added mount subtrees support
  - fdisk: wrong number of sectors for large disks (suse#160822)
  - merge fdisk-xvd (#182553) with new fdisk-isfull (#188981) patch 
  - fix #181549 - raw(8) manpage has old information about dd
  - remove asm/page.h usage


author: Dan Walsh <dwalsh@RedHat.com> 2.13-0.24
changelog:
  - Remove requirement on restorecon, since we can do the same thing
  - with chcon/matchpathcon, and not add requirement on policycoreutils


author: Steve Dickson <steved@redhat.com> 2.13-0.21
changelog:
  - fix #183713 - foreground mounts are not retrying as advertised
  - fix #151549 - Added 'noacl' mount flag
  - fix #169042 - Changed nfsmount to try udp before using tcp when rpc-ing
                  the remote rpc.mountd (iff -o tcp is not specified).
                  This drastically increases the total number of tcp mounts
                  that can happen at once (ala autofs).


author: Jesse Keating <jkeating@redhat.com> 2.13-0.20
changelog:
  - Better calling of restorecon as suggested by Bill Nottingham
  - prereq restorecon to avoid ordering issues


author: Karel Zak <kzak@redhat.com> 2.13-0.16
changelog:
  - fix #181782 - mkswap should automatically add selinux label to swapfile
  - fix #180730 - col is exiting with 1 (fix util-linux-2.12p-col-EILSEQ.patch)
  - fix #181896 - broken example in schedutils man pages
  - fix #177331 - login omits pam_acct_mgmt & pam_chauthtok when authentication is skipped.
  - fix #177523 - umount -a should not unmount sysfs
  - fix #182553 - fdisk -l inside xen guest shows no disks


author: Steve Dickson <steved@redhat.com> 2.13-0.14
changelog:
  - Updated the gssd_check() and idmapd_check(), used with
    nfsv4 mounts, to looked for the correct file in /var/lock/subsys
    which stops bogus warnings.


author: Karel Zak <kzak@redhat.com> 2.13-0.13
changelog:
  - fix #174676 - hwclock audit return code mismatch
  - fix #176441: col truncates data
  - fix #174111 - mount allows loopback devices to be mounted more than once to the same mount point
  - better wide chars usage in the cal command (based on the old 'moremisc' patch)


author: Karel Zak <kzak@redhat.com> 2.13-0.11.pre6
changelog:
  - update to upstream version 2.13-pre6
  - fix #172203 - mount man page in RHEL4 lacks any info on cifs mount options


author: Karel Zak <kzak@redhat.com> 2.13-0.6.pre5
changelog:
  - update to upstream 2.13pre5
  - remove separated cramfs1.1 (already in upstream package)
  - remove odd symlink /usr/bin/mkcramfs -> ../../sbin/mkfs.cramfs
  - fix #170171 - ipcs -lm always report "max total shared memory (kbytes) = 0"


author: Karel Zak <kzak@redhat.com> 2.13-0.4.pre4
changelog:
  - fix #169628 - /usr/bin/floppy doesn't work with /dev/fd0
  - fix #168436 - login will attempt to run if it has no read/write access to its terminal
  - fix #168434 - login's timeout can fail - needs to call siginterrupt(SIGALRM,1)
  - fix #165253 - losetup missing option -a [new feature]
  - update PAM files (replace pam_stack with new "include" PAM directive)
  - remove kbdrate from src.rpm
  - update to 2.13pre4


author: Steve Dickson <steved@redhat.com> 2.13-0.3.pre3
changelog:
  - fix #170110 - Documentation for 'rsize' and 'wsize' NFS mount options
                  is misleading


author: Karel Zak <kzak@redhat.com> 2.13-0.3.pre2
changelog:
  - fix #166923 - hwclock will not run on a non audit-enabled kernel
  - fix #159410 - mkswap(8) claims max swap area size is 2 GB
  - fix #165863 - swsusp swaps should be reinitialized
  - change /var/log/lastlog perms to 0644


author: Karel Zak <kzak@redhat.com> 2.13-0.2.pre2
changelog:
  - /usr/share/misc/getopt/* -move-> /usr/share/doc/util-linux-2.13/getopt-*
  - the arch command marked as deprecated
  - removed: elvtune, rescuept and setfdprm
  - removed: man8/sln.8 (moved to man-pages, see #10601)
  - removed REDAME.pg and README.reset
  - .spec file cleanup
  - added schedutils (commands: chrt, ionice and taskset)


author: Karel Zak <kzak@redhat.com> 2.12p-9.7
changelog:
  - fix #159339 - util-linux updates for new audit system
  - fix #158737 - sfdisk warning for large partitions, gpt
  - fix #150912 - Add ocfs2 support
  - NULL is better than zero at end of execl()


author: Karel Zak <kzak@redhat.com> 2.12p-9.5
changelog:
  - fix #157656 - CRM 546998: Possible bug in vipw, changes permissions of /etc/shadow and /etc/gshadow
  - fix #159339 - util-linux updates for new audit system (pam_loginuid.so added to util-linux-selinux.pamd)
  - fix #159418 - sfdisk unusable - crashes immediately on invocation
  - fix #157674 - sync option on VFAT mount destroys flash drives
  - fix .spec file /usr/sbin/{hwclock,clock} symlinks


author: Karel Zak <kzak@redhat.com> 2.12p-8
changelog:
  - fix #154498 - util-linux login & pam session
  - fix #155293 - man 5 nfs should include vers as a mount option
  - fix #76467 - At boot time, fsck chokes on LVs listed by label in fstab
  - new Source URL
  - added note about ATAPI IDE floppy to fdformat.8
  - fix #145355 - Man pages for fstab and fstab-sync in conflict


author: Karel Zak <kzak@redhat.com> 2.12p-4
changelog:
  - added /var/log/lastlog to util-linux (#151635)
  - disabled 'newgrp' in util-linux (enabled in shadow-utils) (#149997, #151613)
  - improved mtab lock (#143118)
  - fixed ipcs typo (#151156)
  - implemented mount workaround for duplicated labels (#116300)


author: Elliot Lee <sopwith@redhat.com> 2.12p-1
changelog:
  - Update to util-linux-2.12p. This changes swap header format
    from - you may need to rerun mkswap if you did a clean install of
    FC3.


author: Steve Dickson <SteveD@RedHat.com> 2.12a-18
changelog:
  - Made NFS mounts adhere to the IP protocol if specified on
    command line as well as made NFS umounts adhere to the
    current IP protocol. Fix #140016


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Updated the NFS and NFS4 code to the latest CITI patch set
    (in which they incorporate a number of our local patches).


author: Elliot Lee <sopwith@redhat.com> 2.12a-6
changelog:
  - Fix #16415, #70616 with rdevman.patch
  - Fix #102566 with loginman.patch
  - Fix #104321 with rescuept.patch (just use plain lseek - we're in _FILE_OFFSET_BITS=64 land now)
  - Fix #130016 - remove raw.
  - Re-add agetty (replacing it with mgetty is too much pain, and mgetty is much larger)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Made the NFS security checks more explicit to avoid confusion
    (an upstream fix)
  - Also removed a compilation warning


author: Alasdair Kergon <agk@redhat.com>
changelog:
  - Add device-mapper mount-by-label support
  - Fix segfault in mount-by-label when a device without a label is present.


author: <SteveD@RedHat.com>
changelog:
  - Updated the nfs-mount.patch to correctly 
    handle the mounthost option and to ignore 
    servers that do not set auth flavors


author: <SteveD@RedHat.com>
changelog:
  - Make RPC error messages displayed with -v argument
  - Added two checks to the nfs4 path what will print warnings
    when rpc.idmapd and rpc.gssd are not running
  - Ping NFS v4 servers before diving into kernel
  - Make v4 mount interruptible which also make the intr option on by default


author: <SteveD@RedHat.com>
changelog:
  - Reworked how the rpc.idmapd and rpc.gssd checks were
    done due to review comments from upstream.
  - Added rpc_strerror() so the '-v' flag will show RPC errors.


author: <SteveD@RedHat.com>
changelog:
  - Added two checks to the nfs4 path what will print warnings
    when rpc.idmapd and rpc.gssd are not running.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added pesudo flavors for nfsv4 mounts.
  - Added BuildRequires: libselinux-devel and Requires: libselinux
    when WITH_SELINUX is set.


author: Elliot Lee <sopwith@redhat.com> 2.11y-31
changelog:
  - Add patch140 (alldevs) to fix #101772. Printing the total size of
    all devices was deemed a lower priority than having all devices
    (e.g. /dev/ida/c0d9) displayed.


author: Elliot Lee <sopwith@redhat.com> 2.11y-1
changelog:
  - Update to 2.11y
  - Fix #80953
  - Update patch0, patch107, patch117, patch120 for 2.11y
  - Remove patch60, patch61, patch207, patch211, patch212, patch119, patch121
  - Remove patch122, patch200


author: Elliot Lee <sopwith@redhat.com> 2.11w-2
changelog:
  - Remove some crack/unnecessary patches while submitting stuff upstream.
  - Build with -D_FILE_OFFSET_BITS=64


author: Elliot Lee <sopwith@redhat.com> 2.11n-19
changelog:
  - Make a note here that this package was the source of the single change 
  contained in util-linux-2.11f-18 (in 7.2/Alpha), and also contains the 
  rawman patch from util-linux-2.11f-17.1 (in 2.1AS).
  - Package has no runtime deps on slang, so remove the BuildRequires: 
  slang-devel.


author: Elliot Lee <sopwith@redhat.com> 2.11n-17
changelog:
  - Fix teg's swapondetect patch to not print out the usage message when 
  'swapon -a -e' is run. (#66690) (edit existing patch)
  - Apply hjl's utmp handling patch (#66950) (patch116)
  - Fix fdisk man page notes on IDE disk partition limit (#64013) (patch117)
  - Fix mount.8 man page notes on vfat shortname option (#65628) (patch117)
  - Fix possible cal overflow with widechars (#67090) (patch117)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - adjust mainframe patches to apply to current rpm
  - do not include fdisk until it is fixed to work on mainframe


author: Elliot Lee <sopwith@redhat.com> 2.11n-10
changelog:
  - Finish fixing #60675 (ipcrm man page), updated the patch.
  - Fix #61203 (patch114 - dumboctal.patch).


author: Elliot Lee <sopwith@redhat.com> 2.11n-7
changelog:
  Fix various bugs:
  - Add patch110 (skipraid) to properly skip devices that are part of a RAID array.
  - Add patch111 (mkfsman) to update the mkfs man page's "SEE ALSO" section.
  - remove README.cfdisk
  - Include partx
  - Fix 54741 and related bugs for good(hah!) with patch113 (ctty3)


author: Elliot Lee <sopwith@redhat.com> 2.11n-3
changelog:
  - Add util-linux-2.11n-ownerumount.patch (#56593)
  - Add patch102 (util-linux-2.11n-colrm.patch) to fix #51887
  - Fix #53452 nits.
  - Fix #56953 (remove tunelp on s390)
  - Fix #56459, and in addition switch to using sed instead of perl.
  - Fix #58471
  - Fix #57300
  - Fix #37436
  - Fix #32132


author: Elliot Lee <sopwith@redhat.com> 2.11f-17
changelog:
  - Add patch38 (util-linux-2.11f-ctty2.patch) to ignore SIGINT/SIGTERM/SIGQUIT in the parent, so that ^\ won't break things.


author: Elliot Lee <sopwith@redhat.com> 2.11f-16
changelog:
  - Merge patches 36, 75, 76, and 77 into patch #37, to attempt resolve all the remaining issues with #54741.


author: Elliot Lee <sopwith@redhat.com> 2.11f-13
changelog:
  - Patch/idea #76 from HJL, fixes bug #54741 (race condition in login 
  acquisition of controlling terminal).


author: Bill Nottingham <notting@redhat.com>
changelog:
  - revert the patch that calls setsid() in login that we had reverted
    locally but got integrated upstream (#46223)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.11b-1
changelog:
  - Fix up login for real (a console session should be the controlling tty)
    by reverting to 2.10s code (#36839, #36840, #39237)
  - Add man page for agetty (#39287)
  - 2.11b, while at it


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.11a-3
changelog:
  - Fix up login - exiting immediately even if the password is correct
    is not exactly a nice feature.
  - Make definite plans to kill people who update login without checking
    if the new version works ;)


author: Erik Troan <ewt@redhat.com>
changelog:
  - upgraded to 2.11a (kbdrate moved to kbd, among other things)
  - turned off ALLOW_VCS_USE
  - modified mkcramfs to not use a large number of file descriptors
  - include mkfs.bfs


author: Matt Wilson <msw@redhat.com>
changelog:
  - changed Requires: kernel >= 2.2.12-7 to Conflicts: kernel < 2.2.12-7
    (fixes a initscripts -> util-linux -> kernel -> initscripts prereq loop)


author: Matt Wilson <msw@redhat.com>
changelog:
  - patched mkcramfs to use the PAGE_SIZE from asm/page.h instead of hard
    coding 4096 (fixes mkcramfs on alpha...)


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed bug #29131, where ipc.info didn't have an info dir entry,
    added the dir entry to ipc.texi (Patch58)


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated kill man page
  - added patch to fix vipw race
  - updated vipw to edit /etc/shadow and /etc/gshadow, if appropriate
  - added patch to disassociate login from tty, session, and pgrp


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed problem w/ empty extended partitions
  - added patch to fix the date in the more man page
  - set OPT to pass optimization flags to make rather then RPM_OPT_FLAG
  - fixed fdisk -l /Proc/partitions parsing
  - updated to 2.10s


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.10o
  -  fdformat: fixed to work with kernel 2.4.0test6 (Marek Wojtowicz)
  -  login: not installed suid
  -  getopt: by default install aux files in /usr/share/misc
  - update to 2.10n:
  -  added blockdev.8
  -  change to elvtune (andrea)
  -  fixed overrun in agetty (vii@penguinpowered.com)
  -  shutdown: prefer umounting by mount point (rgooch)
  -  fdisk: added plan9
  -  fdisk: remove empty links in chain of extended partitions
  -  hwclock: handle both /dev/rtc and /dev/efirtc (Bill Nottingham)
  -  script: added -f (flush) option (Ivan Schreter)
  -  script: added -q (quiet) option (Per Andreas Buer)
  -  getopt: updated to version 1.1.0 (Frodo Looijaard)
  -  Czech messages (Jiri Pavlovsky)
  - login.1 man page had not /var/spool/mail path (#16998).
  - sln.8 man page (but not executable) included (#10601).
  - teach fdisk 0xde(Dell), 0xee(EFI GPT), 0xef(EFI FAT) partitions (#17610).


author: Matt Wilson <msw@redhat.com>
changelog:
  - use snprintf - not sprintf - when doing
    sprintf ("%s\n", _("Some string")) to avoid overflows and
    segfaults.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - raw control file was /dev/raw, now /dev/rawctl.
  - raw access files were /dev/raw*, now /dev/raw/raw*.


author: Matt Wilson <msw@redhat.com>
changelog:
  - updated to util-linux 2.10c
  - deprecated IMAP login mail notification patch17
  - deprecated raw patch22
  - depricated readprofile patch24


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - hostid is now in sh-utils. On sparc, install hostid as sunhostid (#4581).
  - update to 2.9w:
  -  Updated mount.8 (Yann Droneaud)
  -  Improved makefiles
  -  Fixed flaw in fdisk


author: Christian 'Dr. Disk' Hechelmann <drdisk@tc-gruppe.de>
changelog:
  - added locale message catalogs to %file
  - added patch for non-root build
  - vigr.8 and /usr/lib/getopt  man-page was missing from file list
  - /etc/fdprm really is a config file


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9v:
  -   cfdisk no longer believes the kernel's HDGETGEO
      (and may be able to partition a 2 TB disk)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9u:
  -   Czech more.help and messages (Jiri Pavlovsky)
  -   Japanese messages (Daisuke Yamashita)
  -   fdisk fix (Klaus G. Wagner)
  -   mount fix (Hirokazu Takahashi)
  -   agetty: enable hardware flow control (Thorsten Kranzkowski)
  -   minor cfdisk improvements
  -   fdisk no longer accepts a default device
  -   Makefile fix


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9t:
  -   national language support for hwclock
  -   Japanese messages (both by Daisuke Yamashita)
  -   German messages and some misc i18n fixes (Elrond)
  -   Czech messages (Jiri Pavlovsky)
  -   wall fixed for /dev/pts/xx ttys
  -   make last and wall use getutent() (Sascha Schumann)
      [Maybe this is bad: last reading all of wtmp may be too slow.
       Revert in case people complain.]
  -   documented UUID= and LABEL= in fstab.5
  -   added some partition types
  -   swapon: warn only if verbose


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - include sfdisk (#1164)
  - fix write (#1784)
  - use positive logic in spec file (%ifarch rather than %ifnarch).
  - (re)-use 1st matching utmp slot if search by mypid not found.
  - update to 2.9o
  - lastb wants bad logins in wtmp clone /var/run/btmp (#884)


author: Jakub Jelinek <jj@ultra.linux.cz>
changelog:
  - if hwclock is to be compiled on sparc,
    it must actually work. Also, it should obsolete
    clock, otherwise it clashes.
  - limit the swap size in mkswap for 2.2.1+ kernels
    by the actual maximum size kernel can handle.
  - fix kbdrate on sparc, patch by J. S. Connell
    <ankh@canuck.gen.nz>


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - .perms patch to login to make it retain root in parent process
    for pam_close_session to work correctly


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - patch top build on the arm without PAM and related utilities, for now.
  - build hwclock only on intel


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated MCONFIG to automatically determine the architecture
  - added glibc header hacks to fdisk code
  - rdev is only available on the intel


author: Erik Troan <ewt@redhat.com>
changelog:
  - Merged Red Hat changes into main util-linux source, updated package to
    development util-linux (nearly 2.7).


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - pam.patch differentiated between different kinds of bad logins.
    In particular, "user does not exist" and "bad password" were treated
    differently.  This was a minor security hole.


author: Jan Kaluza <jkaluza@redhat.com> 4.17-19
changelog:
  - fix #751030 - detect s390 kernel, do not detect kernels as ELF binaries
  - fix #751032 - detect all RPM architectures
  - fix #751022 - do not try to get coredump informations from normal binary


author: Jan Kaluza <jkaluza@redhat.com> 4.17-17
changelog:
  - fix #494831 - do not display "for GNU/Linux 2.6.9" twice
  - fix #498671,#692435 - added mime types for XML
  - fix #504417 - recognize PPC swap properly
  - fix #505656 - do not print .doc mime type twice
  - fix #508688 - print complete PPD version
  - fix #618910 - do not read whole file from stdin if it's not ELF
  - fix #641838 - fixed bug when gzip was recognized as FLC
  - fix #668125 - differentiate between GFS1 and GFS2
  - fix #489493 - identify dump format on ppc/s390x


author: Tomas Smetana <tsmetana@redhat.com> - 4.17-14
changelog:
  - fix #235420 - recognize UTF-16, little-endian encoded XML file
  - fix #249473 - wrongly identifies text file as MPEG-4 LO-EP
  - fix #428437 - GFS2 recognition
  - fix #444524 - ext4/ext4dev recognition


author: Martin Bacovsky <mbacovsk@redhat.com> - 4.17-10
changelog:
  - resolves: #241027: CVE-2007-2799 file integer overflow
  - Resolves: #233337: CVE-2007-1536: file 4.20 fixes a heap overflow 
    in that can result in arbitrary code


author: Radek Vokal <rvokal@redhat.com> - 4.12-3
changelog:
  - core64 patch fixing output on core files (#145354) <kzak@redhat.com>
  - minor change in magic patch


author: Radek Vokal <rvokal@redhat.com>
changelog:
  - zlib patch deleted, note patch deleted, rh patch updated, debian patch updated
  - upgrade to file-4.10


author: Jeff Johnson <jbj@jbj.org> 4.07-1
changelog:
  - upgrade to 4.07.
  - deal gracefully with unreadable files (#113207).
  - detect PO files (from Debian).


author: Jeff Johnson <jbj@jbj.org> 4.02-3
changelog:
  - use zlib rather than exec'ing gzip.

  -* Thu Aug 28 2003 Dan Walsh <dwalsh@redhat.com>
  -- Add Selinux support.


author: Trond Eivind Glomsrød <teg@redhat.com> 3.37-1
changelog:
  - 3.37
  - s/Copyright/License/
  - build with --enable-fsect-man5, drop patch
  - disable two old patches


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - fix off-by-1 error when creating filename for use with -i.
  - include a copy of GNOME /etc/mime-types in /usr/share/magic.mime (#14741).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - identify ELF stripped files correctly (#4665).
  - use SPARC (not sparc) consistently throughout (#4665).
  - add entries for MS Office files (#4665).


author: Dave Airlie <airlied@redhat.com> 6.6.3-3.28.el5
changelog:
  - rebase to upstream 6.13.1 release for evergreen support (#573063)
  - radeon-6.6.3-hdp-reset-remove.patch - remove HDP reset (#608894)


author: Adam Jackson <ajax@redhat.com> 6.6.3-3.26.el5
changelog:
  - Rebuild for new RANDR source (#481067)
  - r500-disable-rotation.patch: Disable reflection and rotation, not expected
    to work and not enabled in the other RANDR drivers.


author: Dave Airlie <airlied@redhat.com> 6.6.3-3.24.el5
changelog:
  - radeon-6.6.3-option-dri.patch: add DRI option support (#465142)
  - rebase r500 to 6.12.2 + backport fixes (#495098)
  - r500.xinf: update with latest PCI IDs (#483165, #475532)


author: Dave Airlie <airlied@redhat.com> 6.6.3-3.21.el5
changelog:
  - r500-hdmi-dac.patch: fix HDMI reporting a DAC (#466987)
  - radeon-6.6.3-disable-firemv-dac-load-detect.patch (#448139)


author: Dave Airlie <airlied@redhat.com> 6.6.3-3.20.el5
changelog:
  - r500-lvds-dpms.patch: fix lvds dpms (#469089)
  - r500-hdmi-vga-fix.patch: fix shared DDC lines (#466987)
  - radeon-6.6.3-altix-xaa-no-offscreen-pixmaps.patch (#448139, #468015)


author: Dave Airlie <airlied@redhat.com> 6.6.3-3.12.el5
changelog:
  - Revert radeon-6.6.3-indirect-cursor-regs.patch (#251159)
    it didn't help the customer and we are paranoid.
  - make radeon_tp compile against latest X server header files.


author: Kristian Høgsberg <krh@redhat.com> - 6.6.3-3.11.el5
changelog:
  - Add radeon-6.6.3-disable-altix-dri.patch to disable DRI on SGI Altix
    systems and disable blank-on-init patch entirely (#211530).


author: Dave Airlie <airlied@redhat.com> 6.6.3-3.5.el5
changelog:
  - radeon-6.6.3-disable-rmx-using-ddc-mode.patch (#235156)
  - radeon-6.6.3-disable-dell-rn50-rmx.patch (#302871)


author: Adam Jackson <ajax@redhat.com> 6.6.3-3.2.el5
changelog:
  - blank-on-init.patch: Disable the blanking hack for mach64, it's breaking
    startup.  (#219677)
  - blank-on-init.patch: Also remove redundant DRI disabling redundancy for
    the DRI-disabled RV100 (redundantly).


author: Adam Jackson <ajax@redhat.com> 6.6.3-3.1.el5
changelog:
  - rn50-pixel-clock-limit.patch: As with RHEL3 and RHEL4, de-conflate maximum
    PLL frequency and maximum pixel clock, so the PLL paramaters calculation
    produces valid results.  Fixes black screens and lost sync. (#211504)


author: Adam Jackson <ajax@redhat.com> 6.6.3-3.el5
changelog:
  - rn50-pixel-clock-limit.patch: Back down from overly optimistic maximum
    dotclock in upstream RN50 code. (#217666)


author: Adam Jackson <ajackson@redhat.com> 6.6.2-4.1.el5
changelog:
  - radeon-disable-dri-for-rv100.patch: Disable DRI on rv100-generation cards,
    since it's known to be unstable.  (#197992)


author: Adam Jackson <ajackson@redhat.com> 6.6.2-4
changelog:
  - ati-prefer-radeon-then-r128.patch: When loading through the 'ati' wrapper,
    prefer radeon to rage128 to mach{64,32,16,8,4,2,1}. 
  - r128-fp-dpms.patch: Hook up DPMS for Rage128 DFPs. (#197436)
  - radeon-6.6.2-dac-fix.patch: Even though we turn DACs on for probing, don't
    turn them off.  Fixes black screen of death post-rhgb.  (#208610)
  - radeon-6.6.2-pmac-bios.patch: Be more suspicious of ROMs before interpreting
    their content.  (#208694)
  - radeon-6.6.2-usefbdev-patch.patch: Use the framebuffer stride from fbdev,
    instead of making up numbers.  (#208694)


author: Adam Jackson <ajackson@redhat.com> 6.6.2-2.fc6
changelog:
  - radeon-6.6.2-dac-fix.patch: Backport 25fa71... from git.  Turn on the DAC
    before doing CRT connection probe, otherwise we might incorrectly detect
    a CRT where there isn't one. (#202240 and others)


author: Adam Jackson <ajackson@redhat.com> 6.6.2-1.fc6
changelog:
  - Update to 6.6.2 from upstream:
    - Mach64 stability and correctness fixes
    - Mach64 EXA support.
    - Misc bugfixes for radeon.


author: Adam Jackson <ajackson@redhat.com> 6.6.1-10.fc6
changelog:
  - radeon-6.6.1-use-mtdriver.patch: Use new M_T_DRIVER mode type for mode
    synthesis.
  - Bump Requires to match.


author: Mike A. Harris <mharris@redhat.com> 6.6.1-5.fc6
changelog:
  - Added r128-missing-xf86ForceHWCursor-symbol-bug168753.patch to fix (#168753)
  - Add {?dist} tag to Release field


author: Mike A. Harris <mharris@@redhat.com> 6.6.1-4
changelog:
  - Added "BuildRequires: xorg-x11-server-sdk >= 1.1.0-12" to fix the same
    problem at build time as were added in 6.6.1-2 to fix it at runtime.


author: Adam Jackson <ajackson@redhat.com> 6.6.1-2
changelog:
  - Filter the EDID mode list by the monitor's reported pixel clock.  Bump
    the BuildReq to a server that provides the necessary ABI field.


author: Mike A. Harris <mharris@redhat.com> 6.6.1-1
changelog:
  - Updated xorg-x11-drv-ati to version 6.6.1 update release for X11R7.1
  - Drop db-root-visual.patch, as it is included in 6.6.1
  - Enable DRI support for sparc/sparc64 builds.


author: Kristian Høgsberg <krh@redhat.com> 6.5.7.3-4.cvs20060322
changelog:
  - Update to CVS snapshot of 20060322.
  - Drop xorg-x11-drv-ati-6.5.7.3-radeon-metamodes-SEGV-fix.patch.


author: Mike A. Harris <mharris@redhat.com> 6.5.7.3-3
changelog:
  - Updated radeon.xinf to be up to date with the xf86PciInfo.h from the Xorg
    X server 1.0.1-1 source.  This should account for all supported Radeon
    models now modulo errors/omissions.


author: Mike A. Harris <mharris@redhat.com> 6.5.7.3-2
changelog:
  - Added r128.xinf and radeon.xinf videoalias files to fix bug (#174101).
  - Added "BuildRequires: libdrm-devel >= 2.0-1" to fix bug (#178613)


author: Mike A. Harris <mharris@redhat.com> 6.5.7.3-1
changelog:
  - Updated xorg-x11-drv-ati to version 6.5.7.3 from X11R7.0
  - Added ati.xinf videoalias file for hardware autodetection.


author: Mike A. Harris <mharris@redhat.com> 6.5.7.2-1
changelog:
  - Updated xorg-x11-drv-ati to version 6.5.7.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 6.5.6.1-1
changelog:
  - Updated xorg-x11-drv-ati to version 6.5.6.1 from X11R7 RC1
  - Fix *.la file removal.
  - Add "BuildRequires: mesa-libGL-devel >= 6.4-4 for DRI builds"


author: Mike A. Harris <mharris@redhat.com> 6.5.6-1
changelog:
  - Update BuildRoot to use Fedora Packaging Guidelines.
  - Deglob file manifest.
  - Use _smp_mflags with make, to speed up SMP builds.
  - Add "alpha sparc sparc64" to ExclusiveArch


author: Than Ngo <than@redhat.com> 6:3.5.4-5
changelog:
  - apply upstream patches
      fix #132929, Apply default settings in Power Control->Laptop Battery crash
      fix #113622, kde logout on low battery
      fix #129161, kwalletmanager does not show up in systray


author: Than Ngo <than@redhat.com> 6:3.5.4-4
changelog:
  - fix #207920, klaptop_acpi_help to use pm-utils and pam
  - fix crash in klaptopdaemon
  - apply upstream patches
     fix #134192, computes negative real raised 0 power equals nan


author: Than Ngo <than@redhat.com> 6:3.5.4-3
changelog:
  - fix #205553, Printing text with kedit always Bold
  - apply upstream patch
     fix #128925, menu displays question marks instead of unicode characters


author: Than Ngo <than@redhat.com> 6:3.5.4-2
changelog:
  - apply upstream patch to fix ark crashes, kde#127341
  - apply upstream patch to fix kgpg crashes, kde#132420


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - Skip LABEL entries in /etc/FSTAB until kdf can handle them
    The mounts show up with their device name instead (#71063)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - we don't support lp or lprng in 6.x, use lpr as spooler in klpq.
  - specific requires for zip and unzip for ark.


author: James Antill <jantill@redhat.com> - 3.2.22-34
changelog:
  - Share default opts. setup to get mirrorlist download timeout.
  - Resolves: rhbz#647134
  - Fixes/improvements to repolist, no fail on network etc.
  - Resolves: rhbz#697087


author: James Antill <jantill@redhat.com> - 3.2.22-27
changelog:
  - Make sslverify control name cert mismatch (requires newer m2crypto)
  - Resolves: rhbz#500721
  - Fix install of obsoleted pkg is wrong arch
  - Resolves: rhbz#593349


author: James Antill <jantill@redhat.com> - 3.2.22-24
changelog:
  - Fix reinstall error handling, due to yumdb usage, bad backport of
  - patch for 528746.
  - Resolves: rhbz#559164


author: James Antill <jantill@redhat.com> - 3.2.22-23
changelog:
  - Fix bugtracker URL
  - Resolves: rhbz#528738
  - Fix reinstall for rpm and general output fixup.
  - Resolves: rhbz#528746
  - Remove slow edge case from compare_providers
  - Resolves: rhbz#529233
  - Add base package name check to compare_providers()
  - Resolves: rhbz#529719


author: James Antill <jantill@redhat.com> - 3.2.22-21
changelog:
  - Fix instant downloads crash.
  - Resolves: rhbz#517286
  - Fix exit regression when updating packages which don't exist.
  - Resolves: rhbz#521008
  - Show obsoletes in check-update, if obsoletes flag is on.
  - Resolves: rhbz#526064


author: James Antill <jantill@redhat.com> - 3.2.22-20
changelog:
  - Resolve weird python unicode() vs. str() perf. problem
  - Resolves: rhbz#509932
  - Fixup documentation spelling errors.
  - Resolves: 510012


author: James Antill <jantill@redhat.com> - 3.2.22-18
changelog:
  - Allow API users to set repo directory attributes again.
  - Resolves: rhbz#508055
  - Re-Fix pkgSack init loop on empty pkgSacks to make anaconda happy.
  - Resolves: rhbz#507885
  - Resolves: rhbz#489256


author: James Antill <jantill@redhat.com> - 3.2.22-16
changelog:
  - Fix pkgSack init loop on empty pkgSacks.
  - Resolves: rhbz#507885
  - Fix turning off color.
  - Resolves: rhbz#507883
  - Fix language testing to use LC_MESSAGES instead of LC_CTYPE.
  - Resolves: rhbz#507357
  - Fix to_str not being in misc
  - Resolves: rhbz#508051
  - Resolves: rhbz#489256


author: James Antill <jantill@redhat.com> - 3.2.22-14
changelog:
  - Fix a couple of regressions.
  - Conflict with older rhn-plugin
  - Resolves: rhbz#489256
  - Resolves: rhbz#462915
  - Resolves: 500697


author: James Antill <jantill@redhat.com> - 3.2.22-10
changelog:
  - Rebase for lots of bug fixes, and some features/speedups.
  - Resolves: rhbz#489256
  - Resolves: rhbz#462915
  - Only look at new obsoletes


author: James Antill <jantill@redhat.com> - 3.2.19-13
changelog:
  - Add the timestamp_check option, so we can have repoids to random stuff
  - Resolves: rhbz#466176
  - Fix yum shell man page for repo command.
  - Resolves: rhbz#467415
  - Resolves: rhbz#454882


author: James Antill <jantill@redhat.com> - 3.2.19-10
changelog:
  - Fix/hide exceptions on rpm callbacks, to make rpm happier.
  - Resolves: rhbz#463447
  - Resolves: rhbz#454882


author: James Antill <jantill@redhat.com> - 3.2.19-9
changelog:
  - Fix typo in checkSignals, we rpm has got a signal.
  - Resolves: rhbz#462784
  - Resolves: rhbz#454882


author: James Antill <jantill@redhat.com> - 3.2.19-8
changelog:
  - Allow yum remove to work without downloading pkgSack MD.
  - Only install a single package from a provider.
  - Fix total download cb to use the logger.
  - Add incomplete transactions warning.
  - Speed fix for large patterns (notably large package name excludes).
  - Speed fix for includepkgs.
  - UI tweak for loaded plugins line.
  - Dynamic columns support and list/groupinfo-v changes to use it.
  - Add conflicts as well as obsoletes, so you can't reinstall skip-broken.
  - Resolves: rhbz#462086
  - Resolves: rhbz#454882


author: James Antill <jantill@redhat.com> - 3.2.19-5
changelog:
  - Fix minor API gitch in 3.2.19
  - Obsolete yum-skip-broken, so it auto goes away on update
  - Resolves: rhbz#454882


author: James Antill <jantill@redhat.com> - 3.2.17-0_beta_18_2
changelog:
  - Import next upstream 3.2.18 beta.
  - What will be in Fedora 9 soon.
  - Lots of bug fixes, changes for gpgcheck/repo_gpgcheck/update-minimal/etc.
  - Resolves: rhbz#454882


author: James Antill <jantill@redhat.com> - 3.2.8-8
changelog:
  - Re-add the ssl-ca-cert patch
  - Resolves: rhbz#436804
  - Add unused patterns argument
  - Resolves: rhbz#319491


author: James Antill <jantill@redhat.com> - 3.2.8-6
changelog:
  - Tweak config. file for 3.2.8
  - Resolves: rhbz#237773
  - Set HTTP user-agent to specify this is yum, and which verison
  - Resolves: rhbz#319461
  - Create logdir if it doesn't exist.
  - Resolves: rhbz#253960
  - Add committer/comittime
  - Relates: rhbz#319491


author: James Antill <jantill@redhat.com> - 3.2.8-5
changelog:
  - Import some of the returnPackages() changes, to fix len() == -1 bug with
  - some repos. And missing import sqlutils.
  - Resolves: rhbz#429751


author: James Antill <jantill@redhat.com> - 3.2.8-4
changelog:
  - Workaround the worst behaviour of yum install kernel.
  - Import Fedora 8 yum base.
  - Add lots of small bug fix patches from 3.2.9
  - Resolves: rhbz#384691


author: Jeremy Katz <katzj@redhat.com> - 3.0.1-4
changelog:
  - revert to older version of rpmsack to not repeatedly open the rpmdb to 
    avoid problems (Related: #217285, #213963)


author: Jeremy Katz <katzj@redhat.com> - 3.0-5
changelog:
  - fix traceback when syslog not available (#208773)
  - fix package comparison not properly handling different arches (#210316)


author: Jeremy Katz <katzj@redhat.com> - 2.9.8-1
changelog:
  - update to 2.9.8 with the past two fixes as well as fixes for 
    exclude/include lines in config files


author: Jeremy Katz <katzj@redhat.com> - 2.9.5-5
changelog:
  - update to current CVS snap (20060906) in advance of the final 2.9.6 tarball
  - bring back the installonlyn fixes


author: Jeremy Katz <katzj@redhat.com> - 2.9.4-1
changelog:
  - update to 2.9.4 (including logging fixes, gpg checking fix, 
    and fixes for #200901, #200346, #189483)


author: Jeremy Katz <katzj@redhat.com> - 2.9.1-2
changelog:
  - move yum-updatesd into a subpackage
  - no longer ship the yum update cronjob, yum-updatesd can do this instead


author: Jeremy Katz <katzj@redhat.com> - 2.9.0-3
changelog:
  - add patch to fix filelist crash installing/querying the filesystem package
  - add patch to fix excludes


author: Jeremy Katz <katzj@redhat.com> - 2.6.0-2
changelog:
  - add fix for xen0/xenU kernels in installonlyn (#187894)
  - add fix for proxies with the mirror list (#161190)


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-1
changelog:
  - Update to 2.5.3 with fixes for lots of stuff (and all of our patches applied)
    (#177528, #177737, #179512, others)


author: Jeremy Katz <katzj@redhat.com> - 2.5.0-2
changelog:
  - revert installyonlyn change that wasn't supposed to get committed
  - better fix for #175647 that doesn't cause tracebacks when deps 
    need updating too
  - fix mirrorlist corruption (#175436)


author: Jeremy Katz <katzj@redhat.com> - 2.4.1-2
changelog:
  - add Panu's patch for cachecookie cleaning (#174715)
  - change default cache time to 30 minutes to match new upstream


author: Jeremy Katz <katzj@redhat.com> - 2.4.0-12
changelog:
  - fix problem with custom kernel names in installonlyn (#172855)
  - make it more obvious how to add more tokeep with installonlyn


author: Jeremy Katz <katzj@redhat.com> - 2.4.0-10
changelog:
  - fix problem in installonlyn that caillon hit where removing kernels 
    would trigger instead of only happening on update/install of kernels
  - make plugin config files noreplace


author: Jeremy Katz <katzj@redhat.com> - 2.4.0-9
changelog:
  - enable plugins by default
  - add installyonlyn plugin so that we only keep two kernels around by default


author: Jeremy Katz <katzj@redhat.com> - 2.4.0-8
changelog:
  - drop macro patch
  - more fixes for returnByName* stuff -- need to leave best arch selection
    to the caller


author: Jeremy Katz <katzj@redhat.com> - 2.4.0-3
changelog:
  - add two patches for anaconda that have been committed upstream
    * allow removal of packages from transaction
    * support search by name with sqlite


author: Jeremy Katz <katzj@redhat.com> - 2.3.2-5
changelog:
  - allow multiple packages _providing_ kernel-devel (or any installonlypkgs) 
    to be installed (#155988)


author: Jeremy Katz <katzj@redhat.com> - 2.1.11-1
changelog:
  - update to 2.1.11
    - fix config file error handling
    - better handling of empty lines/comments in mirror lists
    - improve some error messages


author: Jeremy Katz <katzj@redhat.com> - 2.1.10-2
changelog:
  - remove repositories from being explicitly listed in yum.conf, 
    .repo files will be included in the fedora-release package


author: Jeremy Katz <katzj@redhat.com> - 2.1.10-1
changelog:
  - update to 2.1.10
    * updated man pages
    * make more resilient to broken groups file
    * fix urlgrabber failure callback (#136178)


author: Jeff Johnson <jbj@redhat.com> 2.0.3-1
changelog:
  - update to 2.0.3
  - drop yum-init patch, merged into 2.0.3.
  - change rpm version requirement to 4.1.1.


author: Petr Rockai <prockai@redhat.com> 1.20.1-73
changelog:
  - do not ooops in gpm when console device cannot be found, print
    an error message instead and exit(1), as per BR 140025, 176178
  - do not print messages in libgpm, unless envvar GPM_VERBOSE
    is set -- avoids unwanted clutter from libgpm in apps like dialog
    or mc when gpm is not available


author: Adrian Havill <havill@redhat.com> 1.20.1-64
changelog:
  - fixing multilib conflict (#135305):
    o remove buildsys check/conditional for gziping info pages (let rpm
      do it)
    o don't pre-byte-compile emacs code


author: Adrian Havill <havill@redhat.com> 1.20.1-61
changelog:
  - remove unnecessary diagnostic and check of the consolename (#129962)
  - remove /etc/sysconfig/gpm; set unset defaults in the init script instead
    after mousecfg is (or is not) read


author: Florian La Roche <laroche@redhat.com>
changelog:
  - sysconfig/gpm should probably go away, that is more confusing than
    helping anyone
  - read at least sysconfig/gpm first as it seems to have the default values
    and sysconfig/mouse is getting probed values and probably has better
    settings in it.


author: Adrian Havill <havill@redhat.com> 1.20.1-57
changelog:
  - read both the sysconfig/mouse and sysconfig/gpm (preferrence to gpm
    settings), not just one of them, if both exist (#134389)


author: Adrian Havill <havill@redhat.com> 1.20.1-54
changelog:
  - change init so that MOUSECFG fallsback to /etc/sysconfig/gpm if
    /etc/sysconfig/mouse doesn't exist (#133141)
  - fixed compile vs new kernheaders (#131783)


author: Adrian Havill <havill@redhat.com> 1.20.1-46
changelog:
  - revise nodebug patch as liblow reporting the VC to the console through
    stderr has re-appeared (#117676)


author: Adrian Havill <havill@redhat.com> 1.20.1-43
changelog:
  - add event device (for 2.6 kernel) superpatch-- includes all
    patches up to release 38; thanks to Dmitry Torokhov
  - change default mouse device over to /dev/input/mice
  - set mouse type to Intellimouse Explorer (exps2), which is what
    the 2.6 kernel exports by default


author: Adrian Havill <havill@redhat.com> 1.20.1-35
changelog:
  - remove debug output from gpm_report() to prevent spurious
    debugging msgs even when not in debug mode (#98210)


author: Adrian Havill <havill@redhat.com> 1.20.1-33
changelog:
  - reversed -t and -m params in init script, removed $OPTION
  - add doc blurb regarding no auto-repeat with multiple mice


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - don't link against -lncurses, instead make wgetch and stdscr weak
    undefined symbols to break library dependency cycle


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Revert to the version from 7.2 because later versions have some grave
    issues I can't {reproduce,debug} with my hardware, such as


author: Preston Brown <pbrown@redhat.com>
changelog:
  - security patch on socket descriptor from Chris Evans.  Thanks Chris.
  - include limits.h for OPEN_MAX


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - 1.19.1
  - call initgroups in gpm-root before spawning command as user
  - make gpm-root work on big endian


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 1.19.0
  - fix build on systems that don't have emacs
    (configure built t-mouse* only if emacs was installed)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - make sure all binaries are stripped, make init stuff more chkconfig style
  - removed sparc-specific mouse stuff
  - bumped libver to 1.17.5
  - fixed texinfo source


author: Donald Barnes <djb@redhat.com>
changelog:
  - upgraded from 1.10 to 1.12
  - added status/restart functionality to init script
  - added define LIBVER 1.11


author: Mike A. Harris <mharris@redhat.com> 7.1-1
changelog:
  - Bump package version to 7.1 to match the X11 release the packages were
    last synced with.
  - Bump build dep to libXaw-devel >= 1.0.2-6, to pick up indirect dependency
    on libXpm-devel which was fixed in that release.


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Fix all SourceN lines in spec file to not have to update them every time.
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Update all resource utils to version 1.0.0 from X11R7 RC4.
  - Move app-defaults files to _datadir
  - Change manpage dir from man1x to man1 to match RC4 default.
  - Added "BuildRequires: libX11-devel, libXt-devel"


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - Add "Obsoletes: XFree86, XFree86-tools, xorg-x11, xorg-x11-tools", as 
    appres, editres used to be in the XFree86/xorg-x11 package, whereas
    oddly enough, the listres, viewres utilities were in the *-tools subpackage.
  - Rebuild against new libXaw 0.99.2-2, which has fixed DT_SONAME. (#173027)


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-aiptek to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for aiptek input driver generated automatically
    by my xorg-driverspecgen script.


author: Miroslav Lichvar <mlichvar@redhat.com> 3.0.0-1
changelog:
  - update to release 3.0.0
  - spec cleanup
  - drop cfgpath patch
  - fix bad display of frames on linux console (#140698)


author: Karsten Hopp <karsten@redhat.de> 2.7.0-1
changelog:
  - update to fix stale locks when IPTraf did not start due to an
    improper terminal size.
  - this update adds support for wireless LAN interfaces (wlan*, wvlan*).


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - update to 2.3.1 which fixes these bugs:
  - segfault in IP Traffic Monitor
  - segfault in promiscuous mode management
  - failure of filters when source or dest is 255.255.255.255
  - statistics logging bug
  - small buffer overrun in TCP timeout log
  - unrecognized IP display and filter code
  - segfault bug when sorting an empty TCP window


author: Tim Powers <timp@redhat.com>
changelog:
  - updated to version 2.0.2
  - new patch added to that the spec file isn't out of control
    in the install section
  - general spec cleanups
  - built for 6.1


author: Donnie Barnes <djb@redhat.com>
changelog:
  - removed "Distribution:" line (was RHCN)
  - changed description and summary to the ones from bin86 with s/bin/dev/
    done throughout
  - added patch to keep from installing in /usr/bcc and simply in /usr
  - moved include files to /usr/lib/bcc/include


author: Simon Weijgers <simon@mbit.doa.org>
changelog:
  - First release of this package to be shipped to rhcn.

  - To be fixed: Bug in Makefile which installs headerfiles
    double. E.g. /usr/bcc/include/arch is also installed under
    /usr/bcc/include/arch/arch. This doesn't hinder operation,
    just eats a tiny bit of diskspace.


author: Ray Strode <rstrode@redhat.com> - 2.10.0-5
changelog:
  - Let's try this gettext patch one more time--maybe, just
    maybe, I'll get it right this time (bug 155659).


author: Mark McLoughlin <markmc@redhat.com> 2.5.90-1
changelog:
  - Update to 2.5.90
  - Remove hack to get rid of GNOME_COMPILE_WARNINGS and
    use --disable-compile-warnings instead.
  - Package the (L)GPL/FDL and gnome-feedback docs


author: Havoc Pennington <hp@redhat.com>
changelog:
  - also obsolete gnome-core-devel
  - require redhat-artwork and redhat-menus
  - build require Xft/fontconfig


author: Peter Vrabec <pvrabec@redhat.com> - 2.0.8-3
changelog:
  - fix Requires(postun), postun -> preun
  - compile with $RPM_OPT_FLAGS
  - remove Requires(hint) dirmngr, not available in RHEL
  - remove kde-filesystem requires, not available in RHEL


author: Rex Dieter <rdieter[AT]fedoraproject.org> 2.0.5-2
changelog:
  - gnupg-2.0.5
  - gpg-agent not restarted after kde session crash/killed (#196327)
  - BR: libassuan-devel > 1.0.2, libksba-devel > 1.0.2


author: Rex Dieter <rexdieter[AT]users.sf.net> 1.9.19-8
changelog:
  - include gpg-agent-(startup|shutdown) scripts (#136533)
  - BR: libksba-devel >= 1.9.12 
  - %check: be permissive about failures (for now)


author: Ville Skyttä <ville.skytta at iki.fi> - 1.9.17-1
changelog:
  - 1.9.17, signal info patch applied upstream (#162264).
  - Patch to fix lvalue build error with gcc4 (upstream #485).
  - Patch scdaemon and pcsc-wrapper to load the versioned (non-devel)
    pcsc-lite lib by default.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 1.9.16-1
changelog:
  - Merge changes from Rex's 1.9.16-1 (Thu Apr 21):
  -   opensc support unconditional
  -   remove hard-coded .gz from %post/%postun
  -   add %check section
  -   add pth patch
  - Put back patch modified from 1.9.15-4 to make tests verbose
    and change signal.c to describe received signals better.


author: - Bastien Nocera <bnocera@redhat.com> - 0.11.6-4
changelog:
  - Remove chcon calls, problem worked around in the SELinux policy, thanks Dan
  Related: rhbz #460630
  - Forcibly enable tag writing support
  Related: rhbz #460643


author: - Bastien Nocera <bnocera@redhat.com> - 0.11.6-3
changelog:
  - Enable missing plugins hooks in gstreamer
  - Remove gstreamer-python dependency
  Related: rhbz #459790
  - Fix icons
  Related: rhbz #458837
  - Remove Mozilla plugin from the build, if it so happens to have been
    built
  - Fix totem-pl-parser backport, update rhythmbox backport
  Related: rhbz #458832
  - Fix SELinux errors
  Related: rhbz #458834 #458836


author: Alexander Larsson <alexl@redhat.com> - 0.9.5-8.el5
changelog:
  - Disable any handling of mimetypes since we don't do command line args (#217450)
  - Require libgpod 0.4.0 update (#216654)


author: Alexander Larsson <alexl@redhat.com> - 0.9.5-7.el5
changelog:
  - Fix file monitoring
  - Remove fix-keybinding patch in favour of control-center patch
  - Resolves: #216068


author: Ray Strode <rstrode@redhat.com> - 0.9.3.1-3
changelog:
  - fix icon on notification bubbles (bug 183720)
  - patch from CVS to escape bubble markup, found by 
    Bill Nottingham


author: Colin Walters <walters@redhat.com>
changelog:
  - Add configure flags --with-bonobo --with-dbus
  - BR nautilus-cd-burner-devel
  - New upstream CVS snapshot for testing
  - Drop IDL file and ui .xml
  - Add dbus service file
  - Drop upstreamed rhythmbox-bluecurve.tar.gz
  - Drop upstreamed rhythmbox-0.8.8-cell-renderer.patch


author: Colin Walters <walters@redhat.com> - 0.8.8-3
changelog:
  - Add Bluecurve-ized icons from Jeff Schroeder (157716)
  - Add rhythmbox-0.8.8-cell-renderer.patch to remove use of custom
    cell renderer for playback icon (no longer necessary) and
    changes the rating renderer to work with non-b&w icons


author: Colin Walters <walters@redhat.com> - 0.8.4-1
changelog:
  - New upstream version
  - Remove backported patches
  - Gratuitiously bump various BuildRequires versions


author: Colin Walters <walters@redhat.com> - 0.7.1-1
changelog:
  - New major version - I know we are past major version slush, but
    this should have been done two weeks ago along with the GNOME 2.6
    upload.  As upstream author as well, I believe this version is
    good enough for FC2.
  - Remove --disable-mp3
  - Remove id3, flac variables
  - Remove GStreamer major version patch
  - Fix typo in description


author: Matthias Saou <matthias@rpmforge.net> 0.5.3-3
changelog:
  - Fix category from Development/Libraries to Applications/Multimedia.
  - Use bz2 instead of gz as ftp.gnome.org has both, 300k saved in the src.rpm.
  - Fix SCHEMES vs. SCHEMAS in the post scriplet.
  - Added gstreamer-plugins-devel, libvorbis-devel, scrollkeeper and gettext deps.
  - Removed unnecessary date expansion define.
  - Updated description, including mp3 reference removal.
  - Added libid3tag and flac optional support for convenient rebuild.
  - Removed obsolete omf.make and xmldocs.make (included ones are the same now).


author: Adrian Havill <havill@redhat.com> 2.00.0-17
changelog:
  - fix error handling for the case when you attempt to "goto" a dir
    that doesn't exist. (#103902)
  - updated URL in spec file


author: Adrian Havill <havill@redhat.com> 2.00.0-14
changelog:
  - removed static buffers that limit multi-file zmodem functionality (#98654)
  - removed assertions from above patch, massage out conflicts with rh patch


author: Mike A. Harris <mharris@redhat.com> 2.00.0-9
changelog:
  - Added find_lang macro andlang files to package, also avoiding 
    _unpackaged_files_terminate_build
  - Added with_desktop_menu_entry macro to disable minicom.desktop by default


author: Mike A. Harris <mharris@redhat.com> 2.00.0-1
changelog:
  - Updated to version 2.00.0-0, which now uses GNU autoconf for everything,
    to ease portability and internationalization issues.  Hold on for the
    ride, as there's bound to be some bumps on the way.  ;o)  On the up side,
    the packaging is likely to be MUCH more maintainable in the future, which
    is very nice to see.
  - Disabled most patches as they are either included now, not needed, or
    it has yet to be determined.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - rebuild against unzigged lockdev-1.0.0-11 (#51577).
  - add BuildPrereq: on lockdev-devel, not /usr/include/baudboy.h.


author: Mike A. Harris <mharris@redhat.com> 1.83.1-12
changelog:
  - Added minicom-1.83.1-disable-message.patch to disable warning message and
    delay when running minicom as root since root-only is the only supported
    method of running minicom now due to security issues.


author: Mike A. Harris <mharris@redhat.com> 1.83.1-8
changelog:
  - Changed minicom to disable SGID/SUID operation completely as it was
    never designed to be secure, and likely never will be. (#35613)
  - Updated the format string patch I made to fix more format string abuses.
  - Added Czeck cs_CZ locale translations.


author: Mike A. Harris <mharris@redhat.com>
changelog:
  - Fixed format string vuln in usage of do_log()  (bug #35613)
  - Fixed misc other format string abuse with werror().
  - Changed main tarball to bzip2 compression
  - Corrected Buildroot to use _tmppath


author: Rob Crittenden <rcritten@redhat.com> - 2.1.3-1
changelog:
  - Rebase to upstream 2.1.3 (#753936)
  - Updated patch for CVE-2011-3636 to include CR in the HTTP headers.
    xmlrpc-c in RHEL-6 doesn't support the dont_advertise option so that is
    not set any more. Another fake header, X-Original-User_Agent, is added
    so there is no more trailing junk after the Referer header.  (#752226)
  - Add ia64 to list for 64-bit cyrus-sasl-gssapi (#750338)
  - Set minimum n-v-r of sssd to 1.5.1-40


author: Rob Crittenden <rcritten@redhat.com> - 2.0-16
changelog:
  - _isa is not defined in RHEL 5, use alternate mechanism to require
    arch-specific cyrus-sasl-gssapi (#723620)


author: Rob Crittenden <rcritten@redhat.com> - 2.0-15
changelog:
  - KDC autodiscovery may fail when domain != realm (#710143)
  - Use updated xmlrpc-c API to do GSSAPI ticket delegation (#723667)
  - Set minimum curl and xmlrpc-c versions (#723667)
  - Require arch-specific cyrus-sasl-gssapi (#723620)


author: Rob Crittenden <rcritten@redhat.com> - 2.0-12
changelog:
  - Update to upstream 2.0.0rc3 (#631907)
  - Add patch to work on Python 2.4
  - Set minimum Requires for authconfig to 5.3.21-7 (sssd support)
  - Set minimum Requires for openssl to 0.9.8e-18 (sha2 support)
  - Add Requires for sssd, set minimum to sssd-1.5.1-18
  - Add Requires for bind-utils
  - Remove Requires on nss_ldap
  - Update license to GPLv3+


author: Rob Crittenden <rcritten@redhat.com> - 2.0-10
changelog:
  - Port to RHEL-5 (#607772)
  - Drop nslcd patch
  - Drop move binaries patch
  - authconfig 6.0 isn't available so we can't automatically configure sssd
    so configure nss_ldap instead


author: Rob Crittenden <rcritten@redhat.com> - 2.0-8
changelog:
  - Re-add patch to attempt to configure a number of nss_ldap related files
    if installed and configure nslcd.conf if installed. This got inadvertantly
    dropped when the source tarball was re-based (#559004)
  - Update nokrbv patch to remove another usage of python-krbV that
    isn't directly used by ipa-client but fails at runtime. (#598626)


author: Rob Crittenden <rcritten@redhat.com> - 2.0-7
changelog:
  - Update nokrbv patch to remove another usage of python-krbV that
    isn't directly used by ipa-client but fails the build. (#598626)


author: Rob Crittenden <rcritten@redhat.com> - 2.0-4
changelog:
  - Update source tarball to freeIPA v2.0 alpha 3 (tag 1.9.0_alpha3) (#556620)
  - More spec file clean ups
  - Don't install the po files so it doesn't conflict with the server
    ipa-python package


author: Rob Crittenden <rcritten@redhat.com> - 2.0-2
changelog:
  - Remove some commented-out Requires
  - Replace Requires on nss_ldap with nss-pam-ldapd (#559004)
  - Add patch to attempt to configure a number of nss_ldap related files
    if installed and configure nslcd.conf if installed (#559004)


author: Rob Crittenden <rcritten@redhat.com> - 2.0-1
changelog:
  - Initial spec
  - policycoreutils version set to 2.0.78-3 to fix problem with
    restorecon returning 1 in non-failure cases.


author: Jeremy Katz <katzj@redhat.com> - 0.181-1
changelog:
  - Clean up spacing and use current widgets for exception dialog
  - add serbian keyboard models (#175611)


author: Jeremy Katz <katzj@redhat.com> - 0.171-1
changelog:
  - tweaks for new kudzu X driver model
  - Move some of the anaconda X startup handling to rhpl for use in 
    firstboot (clumens)


author: Chris Lumens <clumens@redhat.com> 0.163-1
changelog:
  - Change resolution sorting to match X's behavior (Jef Spaleta, #157596).
  - Don't pad IP address information with unnecessary zeros (#157657).


author: Jeremy Katz <katzj@redhat.com> - 0.161-1
changelog:
  - Only default to fbdev X server on ppc64pseries, not all ppc (#149188)
  - Set UseFBDev on ppc boxes using ati video cards (#149188)


author: Peter Jones <pjones@redhat.com> - 0.157-1
changelog:
  - get rid of "constructors" in favor of a Unit class and "units",
    which works like the old constructors.
  - rework storage.Size.__str__ to be much cleaner
  - make clamp/unclamp/shrink return self.


author: Peter Jones <pjones@redhat.com> - 0.154-1
changelog:
  - add descriptors.py, implementing SimpleBoolDescriptor, BoolDescriptor,
    and TristateDescriptor classes.
  - added storage.py, implementing a Size class useful for representing
    the size of disks or ram, and several utility functions such as Bytes(),
    KiloBytes, MegaBytes(), etc., which act as constructors.
  - added genModule.py, which generates python modules on the fly, so
    you don't need to make a directory, __init__.py, etc just to
    do "from foo.bar import baz"


author: Jeremy Katz <katzj@redhat.com> - 0.151-1
changelog:
  - add patch from Jim Parsons to add executil.execWithCaptureErrorStatus as 
    needed by system-config-lvm


author: Harald Hoyer <harald@redhat.com> - 0.147-1
changelog:
  - let Conf.ConfModules use modprobe.conf name and format (bug 131952)
  - use network script resolv.conf merger/changer (bug 132485)


author: Jeremy Katz <katzj@redhat.com> - 0.139-1
changelog:
  - videocard.py: fixups for VESA handling on x86_64
  - videocard.py, xserver.py: XFree86 -> Xorg changes


author: Brent Fox <bfox@redhat.com> 0.129-1
changelog:
  - enable DRI extentions for all i386, x86_64, and ia64 systems (bug #115672)
  - vmware doesn't do 24bpp (#117375)
  - fix for savage + lcds (#117079)


author: Jeremy Katz <katzj@redhat.com> 0.108-1
changelog:
  - comps.py: preserve xml doc/nodes
  - translate.py: make it so we can use translations from update disks in 
    anaconda


author: Harald Hoyer <harald@redhat.de> 0.101.1-1
changelog:
  - strip quotes from PAP/CHAP server also
  - Conf.py, cope with lines at the end of the file, that have no newline
  - speedup some things


author: Jeremy Katz <katzj@redhat.com> 0.93-1
changelog:
  - mouse.py (mouseWindow): try to ensure we have a locale that 
    we can do linedrawing chars for (#84908)


author: Brent Fox <bfox@redhat.com> 0.87-1
changelog:
  - load additional us keymap for all ru keyboards in keyboard_models.py
  - make sure the kbd option gets set in keyboard.py


author: Brent Fox <bfox@redhat.com> 0.84-1
changelog:
  - if there are no display Modes in the XF86Config file, create one and default to 800x600 (bug #83314)


author: Brent Fox <bfox@redhat.com> 0.79-1
changelog:
  - add us keymap and XkbOptions to non-latin keymaps in keyboard_models.py
  - change keyboard.py to handle the XkbOptions field


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - translate.py: if we fail, at least gracefully fall back instead of 
    causing a traceback (#76104)


author: Jeremy Katz <katzj@redhat.com> 0.69-1
changelog:
  - only probe for the mouse once to fix mouse probing problems
  - make keyboard names more consistent (#79354)


author: Jeremy Katz <katzj@redhat.com> 0.59-1
changelog:
  - access Cards database in /usr/share/hwdata instead of 
    /usr/X11R6/lib/X11 (#73899)
  - excludearch x86_64 until python is fixed


author: Jeremy Katz <katzj@redhat.com> 0.36-1
changelog:
  - add generic wheel mouse types
  - add bad hack to handle packages which should only be installed 
    if another package is installed


author: Jeremy Katz <katzj@redhat.com> 0.27-1
changelog:
  - diskutil.py, diskutil.c: add some simple disk utility methods (mount, 
    umount, sync, ejectCdrom)


author: Brent Fox <bfox@redhat.com> 0.9-2
changelog:
  - Provide a way to pass keymap name back to firstboot
  - Fix error in Slovakian keymap line in keyboard_models.py


author: Martin Stransky <stransky@redhat.com> 2.0.0-2
changelog:
  - added pycairo to Requires
  - compacted card detection
  - fixed info and error dialog boxes
  - fixed configuration loading
  - fixed playback (added script)


author: Martin Stransky <stransky@redhat.com> 1.2.16-3
changelog:
  - fix for #183524 - scsound.log file not created after 
                      failing to configure sound card


author: Martin Stransky <stransky@redhat.com> 1.2.14
changelog:
  - fix for #170073 - Cannot configure snd-dummy
  - fix for #171545 - Please do not hard code file name into
  - fix for #156802 - Menu entry not localized


author: Martin Stransky <stransky@redhat.com> 1.2.12-4
changelog:
  - moved /usr/bin/alsaunmute and /usr/bin/alsacard to /bin
  - removed default_card (#134317)
  - added sorting for cards
  - added HW/SW config switch
  - added log file (/root/scsound.log)
  - added dialog for default audio device
  - set non-blocking mode for aplay


author: - Bastien Nocera <hadess@hadess.net> 1.2.11-1
changelog:
  - unmute the card we're about to play sound for when using ALSA
  - fix setting the volumes with amixer
  - Umute PCM-2 and "DRC Range" as well (#127863) (#146357)
  - Remove unneeded alsa-lib dep (#134319)
  - Remove use of deprecated gtk.FALSE and gtk.TRUE (#153053)
  - Scan the ISA and MacIO buses for soundcards (#146888)
  - Write an asound.conf file even when there's only one soundcard (#134339)
  - Don't crash when we can't find the default soundcard, or the description
    doesn't contain a space (#142801)
  - Use the plughw device to playback the test sample (#134335)


author: Bastien Nocera <bnocera@redhat.com>
changelog:
  - remove useless debug
  - remove use of deprecated Python functions,
  - list USB audio devices
  - don't crash if we can't get the whole maker/model
  - use aplay to play sounds on 2.6 kernels


author: Brent Fox <bfox@redhat.com> 1.1.0-1
changelog:
  - rename from redhat-config-soundcard into system-config-soundcard
  - add Obsoletes for redhat-config-soundcard
  - make changes for Python2.3


author: Tim Waugh <twaugh@redhat.com> 3.1-27.2
changelog:
  - Preserve file modes (bug #437465).
  - Applied patch to fix segfault with missing -c argument (bug #429231).


author: Miloslav Trmac <mitr@redhat.com> - 3.1-21
changelog:
  - Don't just delete the original file when destination and current directory
    are on different filesystems (#65548, #123069, patch by James Antill)
  - Fix return type of StripDelimiter in dos2unix-3.1-safeconv.patch (#136148)


author: Mike A. Harris <mharris@redhat.com> 3.1-20
changelog:
  - Added dos2unix-3.1-manpage-update-57507.patch to fix manpage (#57507)
  - Added dos2unix-3.1-preserve-file-modes.patch to properly preserve file
    permissions (#91331,55183,112710,132145)


author: Elliot Lee <sopwith@redhat.com> 3.1-15
changelog:
  - Remove build dependency on perl, since perl BuildRequires: dos2unix,
    and there's no good reason not to just use sed here.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix bug #57700 (segfault)
  - Add the mac2unix symlink recommended in README
  - Fix compiler warnings


author: Tom Lane <tgl@redhat.com> 1.2.3-0.1.c1
changelog:
  - Update to MySQL-python 1.2.3c1 (not 1.2.3, because it would be
    NVR-newer than RHEL-6)
  Resolves: #475854
  Resolves: #555868
  - Sync specfile with RHEL-6, including:
  - Use python-setuptools instead of distutils, stop using old setup.py
  - Remove unnecessary manual Requires: specifications
  - Update License tag to match code.


author: Karsten Hopp <karsten@redhat.de> 1.2.0-2
changelog:
  - package all python files. INSTALLED_FILES doesn't contain files created
    by the brp-python-bytecompile script


author: Patrick Macdonald <patrickm@redhat.com> 0.9.1-7
changelog:
  - explicitly define the constants directory in case a more
    restrictive umask is encountered (#74019)


author: Karsten Hopp <karsten@redhat.de> 1.7.9-6
changelog:
  - pdfoutput seems to be set to 0 by other tex* stuff, this
    breaks txinfo16 selfcheck as is now produces pdf files instead 
    of dvi. Added workaround


author: Jens Petersen <petersen@redhat.com> - 1.6.3-1
changelog:
  - New package based on automake-1.6.3 package
  - conflicts with autoconf-1.6.3
  - put info files in docs
  - only ship versioned programs


author: James Antill <jantill@redhat.com> - 3.1.0-6
changelog:
  - Fix user and password quoting in URLs
  - Resolves: rhbz#576651
  - Fix serial line progress output
  - Resolves: rhbz#500912


author: James Antill <jantill@redhat.com> - 3.1.0-4
changelog:
  - Import fixes from Fedora, and UI progress tweaks
  - FTP byterange with specified port
  - reget with HTTP servers that don't support Range
  - Dynamic resizing progress, with totals and visible end state
  - Resolves: rhbz#435156
  - Resolves: rhbz#444085
  - Fedora-Bug: 404211
  - Fedora-Bug: 419241
  - Fedora-Bug: 437197


author: Warren Togami <wtogami@redhat.com>
changelog:
  - Options for RHEL4
      * spamc/spamd cannot connect over IPv6 or SSL
      * sa-update is disabled
    The above functionality requires perl modules not included in RHEL4.
    You may still use them if you get those perl modules from elsewhere.
    RHEL5 ships these perl modules.


author: Warren Togami <wtogami@redhat.com> - 3.0.2-9
changelog:
  - SA#4191 uri_to_domain() is broken for urls with empty port
    SA#4232 multipart message with 0 parts -> uninitialized in m//
    SA#4121 Score for user defined rules become ignored
    SA#3944 get_envelope_from not handling received header


author: Warren Togami <wtogami@redhat.com> - 3.0-svn20040530
changelog:
  - svn snapshot 20040530
  - #124870 prevent service startup failure due to old -a option
  - #124871 more docs
  - #124872 unowned directories


author: Warren Togami <wtogami@redhat.com> - 3.0-svn20040524
changelog:
  - #123432 do not start service by default
  - #122488 remove CRLF's
  - #123706 correct license
  - svn snapshot 20040524
  - svn snapshot 20040518


author: Ville Skyttä <ville.skytta at iki.fi> - 2.63-8
changelog:
  - #122233
  - Require perl(:MODULE_COMPAT_*).
  - Use %{_mandir} and %{_initrddir}.
  - Fix License tag and include License in docs.
  - Backslashify multiline init script description.


author: Warren Togami <wtogami@redhat.com> 2.62-3
changelog:
  - Ville Skyttä's fixes from #113596 including:
  - Fix buildroot traces
  - enable openssl
  - Trailing slash to DESTDIR (bug 90202 comment 14).
  - export optflags so they're honored, affects spamc only.


author: Warren Togami <wtogami@redhat.com> 2.62-2
changelog:
  - upgrade to 2.62
  - Prereq -> Requires, former is deprecated
  - Require current version of perl
  - Remove urban myth clean test
  - TODO: Get rid of prefix


author: Tim Powers <timp@redhat.com> 2.43-6
changelog:
  - don't use rpms internal dep generator
  - buildrequire perl-Time-HiRes instead of perl(Time:HiRes) so we can satisfy build deps in the build system


author: Chip Turner <cturner@redhat.com>
changelog:
  - better control of service level, improvement in %post script.
  - (contribs from schirmer@taytron.net)


author: Theo Van Dinter <felicity@kluge.net>
changelog:
  - Updated for 2.20 release
  - made /etc/mail/spamassassin a config directory so local.cf doesn't get wiped out
  - added a patch to remove findbin stuff


author: Theo Van Dinter <felicity@kluge.net>
changelog:
  - Updates for 2.01 release
  - Fixed rc file
  - RPM now buildable as non-root
  - fixed post_service errors
  - fixed provides to include perl modules
  - use file find instead of manually specifying files


author: Tomas Janousek <tjanouse@redhat.com> - 7.6-40.4
changelog:
  - replaced the hostname resolving patch (#220015):
  - resolve the address given to hosts_ctl to hostname, if hostname not given
    (#220015)
  - compare localhost and localhost.localdomain as the same (#196326, #246216)


author: Tomas Janousek <tjanouse@redhat.com> - 7.6-40.3
changelog:
  - resolve hostnames in hosts.{allow,deny}, fixes #220015, #196326
  - unblock and catch SIGCHLD from spawned shell commands,
    fixes #112975 (#241357)
  - don't discard exits from other child processes than the spawned one, fixes


author: Nalin Dahyabhai <nalin@redhat.com> 7.6-32
changelog:
  - link libwrap.so against libnsl, on which it depends
  - add default (weak) versions of allow_severity and deny_severity to the shared
    library so that configure tests can find it correctly


author: Harald Hoyer <harald@redhat.de> 7.6-29
changelog:
  - shared library generated and added #75494
  - added security patch tcp_wrappers-7.6-sig.patch
  - compile and link with -fPIC -DPIC


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - permit hosts.{allow,deny} to be assembled from included components (#17795).
  - permit '*' and '?' wildcard matches on hostnames (#17847).


author: Daniel P. Berrange <berrange@redhat.com> - 0.3.2-3.el5
changelog:
  - Fix colour conversions for mixed-endian setups (rhbz #431811)
  - Fix mouse pointer grab semantics (rhbz #433711)


author: Daniel P. Berrange <berrange@redhat.com> - 0.3.2-2.el5
changelog:
  - Fix keyboard state tracking (rhbz #435763)
  - Fix endian conversion logic in framebuffer updates (rhbz #431811)


author: Marek Grac <mgrac@redhat.com> 1.1.5-9
changelog:
  - Resolves: rhbz#672475 - LV appears as not mounted
  - Resolves: rhbz#672948 - Unable to persist mount point


author: Marek Grac <mgrac@redhat.com> 1.1.5-5
changelog:
  - Resolves: rhbz#567464 - unable to delete a snapshot
  - Resolves: rhbz#548057 - scl should not change order in /etc/fstab
  - Resolves: rhbz#571995 - ext4 resizing is broken
  - Resolves: rhbz#586553 - extending LV creates duplicate entry
  - Resolves: rhbz#578827 - status window is not translated at startup
  - Resolves: rhbz#569498 - problem with snapshot on LV


author: Marek Grac <mgrac@redhat.com> 1.1.5-3
changelog:
  - Resolves: rhbz#455945 - Resizing LV results in the fstab enty being altered
  - Resolves: rhbz#475434 - Removing swap entries from fstav
  - Resolves: rhbz#522200 - System config LVM crashes at start


author: Marek Grac <mgrac@redhat.com> 1.1.5-2
changelog:
  - Resolves: rhbz#525116 - s-c-lvm is extremely slow
  - Resolves: rhbz#516609 - Mirrored LV with corelog is not shown properly
  - Resolves: rhbz#515322 - LVM volume cannot be created in Japanese env.
  - Resolves: rhbz#444525 - Support for ext4/xfs
  - Resolves: rhbz#243646 - Unable to modify logical partition in or_IN
  - Resolves: rhbz#217752 - Default units shoudl be meaningful


author: Ryan McCabe <rmccabe@redhat.com> 1.1.2-1.0
changelog:
  - Update the spec, configure.in, and Makefile.am files
  - Some other minor build tweaks
  - Bump the version number


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.21-1.0
changelog:
  - Fixed 216569 (some messages not localized)
  - Fixed 218126 (Can't resize ext3 fs online)
  - fixes bz216569, bz218126


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.14-1.0
changelog:
  - Fixes for bz180281, 159457, 180269. Mirroring support available with
    constants in lvmui_constants file by setting MIRRORING_UI_SUPPORT to True


author: Jim Parsons <jparsons@redhat.com> 0.9.9-1.0
changelog:
  - Fixes for bz137111, 138887, 138006,138097. Also removed fstab checkbox
    and added it as a feature at 138831 for next release.


author: Jim Parsons <jparsons@redhat.com> 0.9.7-1.0
changelog:
  - Improved handling of garbage in the size string -- try catch in place
    now that traps for ValueError 
  - Improved handling of sizes/units for new LV creation
  - Now 'Unused' sections in Logical View of VGs, are unselectable. Also,
    if there are no LVs associated with a VG, the Logical view buttonpanel 
    button for "Remove selected extents" is set to not be sensitive, as 
    there is nothing to remove from this case.
  - Revamped PV removal code, so that proper checking is done before moving
    extents.
  - Added new method that checks if dm-mirror mod is loaded in kernel. If not,
    an appropriate error message is generated.
  - Fixed tree selection mechanism by preventing multiple VG selection.
  - Handle delete-event on VG creation dialog, so it is hidden.
  - Fixed bz137099, 137071, 137869, 137434, 138085


author: Jim Parsons <jparsons@redhat.com> 0.9.4-1.0
changelog:
  - Fixes for bz137190 empty vg name field validation, 
  - bz137048 removes resizable checkbox for vgcreate, 
  - bz137208 unique vg name checking fixed, 
  - bz137107 remove autobackup checkbox, 
  - bz137231 warn on extend vg when init'ing a new entity.


author: Ray Strode <rstrode@redhat.com> 2.16.0-5.3.1
changelog:
  - Proxy fixes, patch by
    Behdad Esfahbod <besfahbo@redhat.com>
    and
    Olivier Fourdan <ofourdan@redhat.com>
    Resolves: #719399


author: Kristian Høgsberg <krh@redhat.com> - 2.14.1-10
changelog:
  - Fix selection atom name intialization (patch from Kjartan Maaras).
  - Lower vte requirement to 0.12.0-2 which is what fc5-bling has.


author: Kristian Høgsberg <krh@redhat.com> 2.14.1-7
changelog:
  - Only use ARGB visual if a compositing manager is running to avoid
    slow-down caused by automatic compositor.


author: Kristian Høgsberg <krh@redhat.com> 2.14.1-5
changelog:
  - Fix gnome-terminal-2.14.1-real-transparency.patch to check for
    window->priv != NULL before dereferencing.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.0.0
  - use desktop-file-install
  - put bonobo server file in file list
  - put help files in file list
  - apply some fixes from CVS (or rather, that I'm going to 
    check in to CVS soon)


author: Miloslav Trmač <mitr@redhat.com> - 2.9.7-1.1.el5.4
changelog:
  - Add --exclude-pattern, and use it to avoid deleting /tmp/hsperfdata_*
    Resolves: #527425
  - Fix fuser invocation for names starting with '-'
    Resolves: #548932


author: Miloslav Trmač <mitr@redhat.com> - 2.9.7-1.1.el5.2
changelog:
  - Use the maximum of atime, mtime and ctime when checking whether a file is
    obsolete
    Resolves: #373301


author: Miloslav Trmac <mitr@redhat.com> - 2.9.7-1.1.el5.1
changelog:
  - Fix some format string mismatches (backport from 2.9.8)
  - Automatically exclude aquota.{group,user} files in filesystem root
    directories (backport from 2.9.10)
    Resolves: #213654


author: Miloslav Trmac <mitr@redhat.com> - 2.9.6-1
changelog:
  - Add --exclude-user (original patch by Brett Pemberton)
  - Fix too long line in /etc/cron.daily/tmpwatch


author: Miloslav Trmac <mitr@redhat.com> - 2.9.3-1
changelog:
  - Silently ignore ENOENT if somebody removes files faster than us (#154960)
  - Handle failures to exec fuser
  - Fix check for negative grace periods


author: Miloslav Trmac <mitr@redhat.com> - 2.9.1-1
changelog:
  - Add --exclude, use it to preserve X socket directories (#107069)
  - Allow multiple directory arguments with relative paths (#91097)
  - Don't manually strip the binary


author: Mike A. Harris <mharris@redhat.com> 2.9.0-1
changelog:
  - Added Solaris/HPUX support to tmpwatch via patch from Paul Gear (#71288)
  - Rebuild in rawhide as 2.9.0-1


author: Mike A. Harris <mharris@redhat.com> 2.8.3-1
changelog:
  - Added support for large files with 64bit offsets by adding to CFLAGS
    -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 bug (#56961)


author: Preston Brown <pbrown@redhat.com> 2.8-1
changelog:
  - added a "nodirs" option which inhibits removal of empty directories.
  - Integrated race condition fixes from Martin Macok (#50148)
  - do not try to remove ext3 journal files (#50522)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - Patch from enrico.scholz@informatik.tu-chemnitz.de allows concurrent 
    usage of mtime, ctime, and atime checking (#19550).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use execle() instead of system() to get the correct return code, fixes from
    Jeremy Katz <katzj@linuxpower.org>


author: Preston Brown <pbrown@redhat.com>
changelog:
  - support for CTIME from jik@kamens.brookline.ma.us
  - fixes for fuser checks from Ian Burrell <iburrell@digital-integrity.com>.
  - remove directories when empty without --all flag, to be consistent w/docs.


author: Paul Gear <paulgear@bigfoot.com>
changelog:
  - HP-UX port (including doco update)
  - Tweaked Makefile to allow installation into different base directory
  - Got rid of GETOPT_... defines which didn't do anything, so that short
    equivalents for all long options could be defined.
  - Fixed bug in message() where 'where' file handle was set but unused
  - Changed most fprintf() calls to message()


author: Preston Brown <pbrown@redhat.com>
changelog:
  - I am the new maintainer
  - fixed cleanup of directories
  - added --quiet flag
  - freshen manpage
  - nice patch from Kevin Vajk <kvajk@ricochet.net> integrated


author: Erik Troan <ewt@redhat.com>
changelog:
  - added man page to package
  - uses a buildroot and %attr
  - fixed error message generation for directories
  - fixed flag propagation


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-magellan to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for magellan input driver generated automatically
    by my xorg-driverspecgen script.


author: Tim Waugh <twaugh@redhat.com> - 0.6.2-5.2
changelog:
  - Initialize locale when setting page size from locale (bug #221871).  If
    locale is not set by HAL, fetch it from i18n sysconfig file.


author: Tim Waugh <twaugh@redhat.com> - 0.6.2-5.1
changelog:
  - Use correct page size in locales that do not use US Letter (bug #221871).
    Requires system-config-printer-libs >= 0.7.32.6.


author: Florian Festi <ffesti@redhat.com> - 0.6.1-1
changelog:
  - bump to 0.6.1 (fixed hal policy file)
  - added dummy init script for cups-config-daemon to fix the postun
    script of the 0.5.5 version


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.3-1
changelog:
  - Add a build reqiures and requires for dbus >= 0.31
  - Rebuild with HAL 0.5.0 and D-BUS 0.31
  - Add hal fdi file to match printers to the hal_lpadmin callout


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-11
changelog:
  - Added get_udi_from_env patch which gets the UDI of the printer
    from the UDI env variable set by hal if the UDI is not given on 
    the command line
  - Made sure fdi file installs in correct place and executes hal_lpadmin
    correctly
  - changed the check if printer code to check string lists now


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-9
changelog:
  - For some reason -8 was never built into rawhide.  Bumping the 
    release to 9 and rebuilding for smooth upgrade from fc3


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-8
changelog:
  - use_usb_if_null patch makes sure that the make and model of the 
    printer is never null even if hal does not populate the
    printer.vendor and info.product fields.  (Bug #136666)
  - (printer_update.hal, printer_remove.hal): Use $UDI instead of 
    $HAL_PROP_INFO_UDI which in some instances may not be populated


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-6
changelog:
  - Add Colin Walter's daemon patch
  - Add BuildRequires for glib
  - Add patch to take out gdk from configure.in
  - Restart cups-config-daemon in the post


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Patch now calls killall -SIGHUP cupsd if pid file is wrong or does not exist.
    This is mainly for older cups versions which do not output a pid file.


author: William Poteat <wpoteat@redhat.com> 0.98.9-1
changelog:
  - 768983: When consuming a future subscription, the repos --list should be
    empty. (wpoteat@redhat.com)
  - 720360: Write *-key.pem files out with 0600 permissions. (awood@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.7-1
changelog:
  - 766895: Added hypervisorCheckIn call to allow sending a mapping of host/guest ids for
    creation/update. (mstead@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.6-1
changelog:
  * Tue Dec 06 2011 William Poteat <wpoteat@redhat.com> 0.98.5-1
  - 
  +- 754366: workaround a bug in httpslib.ProxyHttpsConnection
  +  (alikins@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.3-1
changelog:
  - 752854: Fixing error in iniparser around unpacking of a dictionary for
    default values. (awood@redhat.com)
  - 708362: remove entitlement keys on delete as well (alikins@redhat.com)
  - 734114: registering with --org="foo bar" throws a NetworkException instead of
    a RestlibException (awood@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.2-1
changelog:
  - 749853: backport new python-rhsm API calls present in 6.2 for 5.8
    (cduryee@redhat.com)
  - rev python-rhsm version to match sub-mgr (cduryee@redhat.com)
  - point master to rhel5 builder (cduryee@redhat.com)
  - fix python syntax for older versions (jbowes@redhat.com)
  - Fix yum repo location for EL6. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.97.1-1
changelog:
  - 746241: UEPConnection.updateConsumer now passes empty list in POST request
    (mstead@redhat.com)
  - 737935: overcome 255 char limit in uuid list (cduryee@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.12-1
changelog:
  - Add makefile and targets for coverage and "stylish" checks
    (alikins@redhat.com)
  - Add tests for config parsing (cduryee@redhat.com)
  - 736166: move certs from subscription-manager to python-rhsm
    (cduryee@redhat.com)


author: James Bowes <jbowes@redhat.com> 0.96.11-1
changelog:
  - add future date bind (jesusr@redhat.com)
  - 735226: allow Keys to validate themselves (bkearney@redhat.com)
  - Add getVirtOnly() (cduryee@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.10-1
changelog:
  - Submit a Content-Length when body of request is empty. (dgoodwin@redhat.com)
  - Support installed products when registering. (dgoodwin@redhat.com)
  - Add ability to update a consumer's installed products list.
    (dgoodwin@redhat.com)
  - Support for new bind method (cduryee@redhat.com)


author: James Bowes <jbowes@redhat.com> 0.96.9-1
changelog:
  - self.sanitize, and add support for quote_plus. (cduryee@redhat.com)
  - Enhance the insecure mode to not do peer checks. (bkearney@redhat.com)
  - Wrap urllib.quote in a helper method to cast int to str as needed.
    (cduryee@redhat.com)
  - 728266: Unsubscribe from subscription manager GUI is broken
    (cduryee@redhat.com)
  - Remove quantity for bind by product. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.8-1
changelog:
  - 719378: Encode whitespace in urls (bkearney@redhat.com)
  - Change package profile upload url. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.7-1
changelog:
  - Logging cleanup. (dgoodwin@redhat.com)
  - Remove unused add_ssl_certs method. (dgoodwin@redhat.com)
  - Load supported resources when UEPConnection is instantiated.
    (dgoodwin@redhat.com)
  - Send package profile. (dgoodwin@redhat.com)
  - Allow testing if package profiles equal one another. (dgoodwin@redhat.com)
  - Support creating package profile from a file descriptor.
    (dgoodwin@redhat.com)
  - Allow the attributes to be None for username and password in consumer
    selction. (bkearney@redhat.com)
  - Add a Package object. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.6-1
changelog:
  - Add support for new Katello error responses. (dgoodwin@redhat.com)
  - Log the response when there's an issue parsing error JSON.
    (dgoodwin@redhat.com)
  - Add support for registration to Katello environments. (dgoodwin@redhat.com)
  - Don't send an http body if we don't have one. (jbowes@redhat.com)
  - Add call to list environments. (dgoodwin@redhat.com)
  - Do not load CA certs if in insecure mode. (dgoodwin@redhat.com)
  - Cache supported resources after establishing connection.
    (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.96.5-1
changelog:
  - Fix backward compatability with old use of getPoolsList.
    (dgoodwin@redhat.com)
  - Remove one built in type issue. (bkearney@redhat.com)
  - Removed unused Bundle class (alikins@redhat.com)
  - quantity for subscription (wottop@dhcp231-152.rdu.redhat.com)
  - Add the activation key call, and remove subscription tokens
    (bkearney@redhat.com)
  - Improve the doco, referencing the candlepin site. (bkearney@redhat.com)
  - Improve the defualt values for the config (bkearney@redhat.com)
  - Fix bug with owner specification during registration. (dgoodwin@redhat.com)


author: Bryan Kearney <bkearney@redhat.com> 0.96.4-1
changelog:
  - Adding profile module and updating spec (pkilambi@redhat.com)
  - Added stacking Id to the certificate (wottop@dhcp231-152.rdu.redhat.com)
  - Changed call to CP for owner list (wottop@dhcp231-152.rdu.redhat.com)
  - added getOwners function for use with 'list --owners'
    (wottop@dhcp231-152.rdu.redhat.com)
  - change (wottop@dhcp231-152.rdu.redhat.com)
  - Added the owner entered in the cli to the post for register
    (wottop@dhcp231-152.rdu.redhat.com)
  - altered pool query to use both owner and consumer
    (wottop@dhcp231-152.rdu.redhat.com)
  - Added getOwner(consumerid) function (wottop@dhcp231-152.rdu.redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.3-1
changelog:
  - 700601: Don't set the Accept-Language if we don't have a valid locale
    (alikins@redhat.com)
  - 692210: remove a non critical warning message that is spamming the logs
    (alikins@redhat.com)
  - 691788: Fix bad check for missing order info. (dgoodwin@redhat.com)
  - Add a version of get_datetime from M2Crypto since it isnt avail on RHEL 5.7
    (alikins@redhat.com)
  - Use older strptime call format (cduryee@redhat.com)
  - 683550: fix parsing empty cert extensions (jbowes@redhat.com)
  - Add support for content tagging. (dgoodwin@redhat.com)
  - Use tlsv1 instead of sslv3, for fips compliance (cduryee@redhat.com)


author: Chris Duryee (beav) <cduryee@redhat.com>
changelog:
  - Add new extensions to order (jbowes@redhat.com)
  - remove shebang from certificate.py for rpmlint (jbowes@redhat.com)
  - Adding activateMachine to connection api. (jharris@redhat.com)
  - 668814: break out 404 and 500s into a different error (cduryee@redhat.com)
  - Initialized to use tito. (jbowes@redhat.com)
  - bump version (jbowes@redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.94.12-1
changelog:
  - Related: #668006
  - Remove a missed translation. (dgoodwin@redhat.com)
  - Fix logger warning messages. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.94.10-1
changelog:
  - Related: #661863
  - Add certificate parsing library. (dgoodwin@redhat.com)
  - Fix build on F12/RHEL5 and earlier. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.94.2-1
changelog:
  - Remove I18N code. (dgoodwin@redhat.com)
  - Spec cleanup. (dgoodwin@redhat.com)
  - Cleaning out unused log parsing functions (jharris@redhat.com)
  - More tolerant with no rhsm.conf in place. (dgoodwin@redhat.com)
  - Switch to python-iniparse. (alikins@redhat.com)


author: Karel Klic <kklic@redhat.com> 1.3.5-11.el5
changelog:
  - Added fix for CVE-2010-0001: (64 bit) Integer underflow by decompressing
    LZW format files
    Resolves: rhbz#555089


author: Ivana Varekova <varekova@redhat.com> 1.3.5-8
changelog:
  - fix bug 204676 (patches by Tavis Ormandy)
    - cve-2006-4334 - null dereference problem
    - cve-2006-4335 - buffer overflow problem
    - cve-2006-4336 - buffer underflow problem
    - cve-2006-4338 - infinite loop problem
    - cve-2006-4337 - buffer overflow problem


author: Tomas Mraz <tmraz@redhat.com> 1.3.5-3
changelog:
  - don't use the asm code again as it's slower than the gcc compiled one
  - convert the .spec to UTF-8


author: Tomas Mraz <tmraz@redhat.com> 1.3.5-2
changelog:
  - upstream 1.3.5
  - dropped long ago obsolete dirinfo patch
  - escape file names in zgrep (#123012)
  - make stack in match.S nonexecutable


author: Jeff Johnson <jbj@redhat.com> 1.3.3-9
changelog:
  - enlarge window buffer to avoid accessing beyond end-of-buffer (#78413,#83095).
  - re-enable rsync ready patch.


author: Trond Eivind Glomsrød <teg@redhat.com> 1.3.0-16
changelog:
  - replace tempfile patches with improved ones solar@openwall.com
  - Add less to the dependency chain - zless needs it


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed buzilla bug #26680. Wrong skip value after mktemp patch and forced
    overwrite for output file during decompression.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add HAVE_LSTAT define, to avoid it doing weird things to symlinks
    instead of ignoring them as the docs say it should (#22045)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Build system handles stripping
  - Don't do thing the system does, like creating directories
  - use --bindir /bin
  - Added URL
  - skip unnecesarry sed step
  - Include THANKS, AUTHORS, ChangeLog, TODO


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - adopt patch from Paul Eggert to fix detection of the improper tables in
    inflate.c(huft_build)
  - the latest released version 1.2.4a, which provides documentation updates
    only. But it lets us use small revision numbers again
  - add an dirinfo entry for gzip.info so we can get rid of the ugly --entry
    args to install-info


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added /usr/bin/gzip and /usr/bin/gunzip symlinks as some programs are too
    brain dead to figure out they should be at least trying to use $PATH
  - added BuildRoot


author: Jan Iven <jan.iven@cern.ch> 1-6.slc5
changelog:
  - split out for SLC5
     - no more Kerberos4 in "kinit" (MIT branch - just AFS)
     - remove "klog" and "tokens" wrappers - use OpenAFS version in standard path
     - add "pagsh.openafs" to "pagsh" wrapper
     - remove "klist" and "kdestroy" - MIT version should be in user path.


author: Jan Iven <jan.iven@cern.ch> 1-6.scl4
changelog:
  - prefer aklog over afs5log since it generates no bogus requests on the server
  - prepare to re-route kpasswd to central password page


author: Jan Iven <jan.iven@cern.ch> 1.2
changelog:
  - unified version for SLC3/4 again
  - pam_krb5-2.2.8 is required (for afs5log)
  - slightly stronger warning on the "klog" wrapper


author: Jan Iven <jan.iven@cern.ch> 0.8
changelog:
  - update wrappers to use either Heimdal (preferred) or MIT
  - get AFS+Krb4 even with MIT kinit
  - remove "Kerberos4 or Kerberos5" logic from kpasswd


author: Jan Iven <jan.iven@cern.ch>
changelog:
  - change kpasswd to use the AFS version for now, trigger 
    on /afs/cern.ch/project/connectivity/KERBEROS-VERSION for the upgrade
  - add passwd (from 7.3 SUE, changed perl path)


author: Jay Fenlason <fenlason@redhat.com> 6-4
changelog:
  - Backport from upstream to clean up a bunch of minor bugs:
    Resolves: 450162 -  Request for ethtool to display all NIC speeds
    Resolves: 472034 -  Redundant file INSTALL is included in the package
    Resolves: 472038 -  Usage message states that -h requires a DEVNAME
    Resolves: 524241 -  ethtool: typo in "speed 10000" command line parsing
    Resolves: 529395 -  add support for 10000baseT


author: Jay Fenlason <fenlason@redhat.com> 6-3
changelog:
  - Include patch from upstream to close
    bz#509398 -  ethtool should support GRO options
    Resolves: #509398


author: Jay Fenlason <fenlason@redhat.com> 6-2
changelog:
  - Include patch from Radek Bíba (rbiba@redhat.com) to close
    bz#462696 - ethtool now supports 10000 Mb/s but its man page hasn't been updated
    Resolves: #462696


author: Jay Fenlason <fenlason@redhat.com> 6-1
changelog:
  - Upgrade to ethtool version 6 to close
    bz#219364  -  [rhel5b1s9] ethtool support for for displaying 10GB speeds
    Resolves: #219364


author: Jay Fenlason <fenlason@redhat.com> 5-1
changelog:
  - Upgrade to ethtool version 5 to close
    bz#184985: RFE: 10gigE support
    bz#204840: "buffer overflow detected" when devname's length >=16 of ethtool
    Resolves: #184985, #204840


author: Jeff Garzik <jgarzik@pobox.com>
changelog:
  - Update to version 3.
  - Use %buildroot macro, rather than RPM_BUILD_ROOT env var,
    as recommended by RPM packaging guidelines.


author: Tim Powers <timp@redhat.com>
changelog:
  - man pages in /usr/share/man (FHS compliant location)
  - grabbed spec from contrib
  - initial build for Powertools


author: Timo Karjalainen <timok@iki.fi>
changelog:
  - Reverted back to un-gzipped man-pages (Redhat style)
  - Added patch to compile everything cleanly
  - Some minor changes to specfile


author: Tomasz K³oczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - new version:
      Patchlevel 17 had some minor bugfixes and improvements
      - Trailer information now put before %EOF comments if no %Trailer
      - psselect can now add blank pages.
      - Piped input works in Linux
      - spec file rewrited for using Buildroot,
      - man pages gziped.


author: Tim Waugh <twaugh@redhat.com> 1.69.1-2
changelog:
  - Patches from W. Michael Petullo:
    - Fix lists blocking (bug #161371).
    - Avoid proportional-column-width for passivetex (bug #176766).


author: Tim Waugh <twaugh@redhat.com> 1.64.1-6
changelog:
  - Fix last margin-left fix (bug #113456).
  - Reduce instances of itemized/ordered lists having misalignments.


author: Tim Waugh <twaugh@redhat.com> 1.62.4-1
changelog:
  - 1.62.4.
  - No longer need hyphens patch.
  - Avoid expressions in margin-left attributes, since passivetex does not
    understand them.


author: Chris Runge <crunge@pobox.com>
changelog:
  - added extensions and additional doc
  - bin added to doc; the Perl files are for Win32 Perl and so need some
    conversion first


author: Chris Runge <crunge@pobox.com>
changelog:
  - Initial RPM (based on docbook-style-dsssl RPM)
  - note: no catalog right now (I don't know how to do it; and not sure why
    it is necessary)


author: Jan Kaluza <jkaluza@redhat.com> - 3.7.4-12
changelog:
  - fix #474013 - mention scripts arguments in man page
  - fix #461494 - proper exit code when logrotate.status is corrupted
  - fix #484075 - logrotate "size" directive can exceed 1895825408 bytes
  - fix #485553 - add proper /var/log/btmp pattern into default logrotaet config
  - fix #540119 - fixed missingok problem with globs
  - fix #567365 - handle errors during rename call
  - fix #638591 - better documentation of "size" parameter
  - fix #622059 - mention authors in man page
  - fix #579680 - fixed logrotate postrotate script args with nosharedscripts
  - fix #642936 - mention all options in manpage
  - fix #574784 - prevent recursive include


author: Tomas Smetana <tsmetana@redhat.com> - 3.7.4-9
changelog:
  - fix #431836 - memory error on corrupted status file
  - fix #445554 - lgrotate ignores pre/postrotating scripts arguments
  - fix #447022 - logrotate doesn't rotate logs if status file is corrupted


author: Tomas Smetana <tsmetana@redhat.com> - 3.7.4-8
changelog:
  - fix #247410 - logrotate does not honor size directive
  - fix #250059 - logrotate manual page bug
  - fix #259281 - logrotates default config rotates wtmp irrationally often


author: Miloslav Trmac <mitr@redhat.com> - 3.7.1-2
changelog:
  - Fix sending mails (#131583)
  - Preserve file attributes when compressing files (#121523, original patch by
    Daniel Himler)


author: Erik Troan <ewt@redhat.com>
changelog:
  - always use compressext for the extension for compressed
    files; before compresscmd and compressext had to agree
  - moved all compression to one code block
  - compression, scripts don't use system() anymore
  - compress and maillast didn't work together properly
  - delaycompress and mailfirst didn't work properly
  - don't use system() for mailing (or uncompressing) logs anymore
  - use "-s" for speciying the subjected of mailed logs


author: Elliot Lee <sopwith@redhat.com> 3.6.2-1
changelog:
  - Fix bug #55809 (include logrotate.status in %files)
  - Fix bug #58328 (incorrect error detection when reading state file)
  - Allow 'G' size specifier from bug #57242


author: Preston Brown <pbrown@redhat.com> 3.6-1
changelog:
  - patch from Alexander Kourakos <awk@awks.org> to stop the shared
    postrotate/prerotate scripts from running if none of the log(s) need
    rotating.  All log files are now checked for rotation in one batch,
    rather than sequentially.
  - more fixes from Paul Martin <pm@debian.org>


author: Preston Brown <pbrown@redhat.com> 3.5.6-1
changelog:
  - enable LFS support (debian bug #100810)
  - quote filenames for running compress commands or pre/postrotate cmds (#21348)
  - deprecate "errors" directive (see bug #16544 for explanation)
  - update man page
  - configurable compression command by Colm Buckley <colm@tuatha.org>


author: Jan Iven <jan.iven@cern.ch>
changelog:
  - adapt "installed" test to new ncm-ncd output
  - make --update work for single components
  - added -quiet


author: Adam Jackson <ajax@redhat.com> 1.3.0-8.3
changelog:
  - vesa-1.3.1-*.patch: Backport various fixes from upstream, and allow mismatch
    between 136[0-8]x768 modes. (#614960)
  - Bump xserver requires to a version that includes VBE PanelID.


author: Adam Jackson <ajax@redhat.com> 1.3.0-8.2
changelog:
  - vesa-1.3.0-vbe-dpms.patch: Use VBE's DPMS method, instead of manual VGA
    register writes, so that laptop backlights turn off too. (#494671)


author: Adam Jackson <ajax@redhat.com> 1.3.0-5
changelog:
  - vesa-1.3.0-mode-heuristics.patch: If strict intersection of VBE and EDID
    modes leaves no modes remaining after validation, try again with just
    range and VBE checks.  Replaces earlier range-hack and validmode patches.


author: Adam Jackson <ajax@redhat.com> 1.3.0-4
changelog:
  - vesa-1.3.0-range-hack.patch: Work around broken ATI video BIOSes.
  - Disown the module dir
  - Fix the License


author: Adam Jackson <ajax@redhat.com> 1.3.0-2
changelog:
  - vesa-1.2.1-validmode.patch: Strictly limit runtime modes to the intersection
    of the BIOS and DDC lists, if a DDC list exists; fixes cases where we'd
    choose 1600x1200 on 1680x1050 panel.  Conversely, be more forgiving when
    validating the resulting set against the sync ranges; fixes 640x480 syndrome
    when the monitor has broken DDC.  Don't be deceived though, vesa still sucks.


author: Adam Jackson <ajax@redhat.com> 1.3.0-1
changelog:
  - Update to 1.3.0
  - vesa-1.2.1-validmode.patch: Implement a ValidMode driver hook, which rejects
    modes not present in the BIOS or outside the capability of the monitor.


author: Mike A. Harris <mharris@redhat.com> 1.0.1.2-1
changelog:
  - Updated xorg-x11-drv-vesa to version 1.0.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for vesa video driver generated automatically
    by my xorg-driverspecgen script.


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.38-1
changelog:
  - upgrade to 5.38
  - fix #438556 - upgrade request
  - fix #456471 - SELinux prevents smartd from monitoring 3ware RAID


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.36-4
changelog:
  - fix #232168 - wrong exit status of the init script
  - fix #326551 - smartctl hangs the system when run on PERC controller


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-3.1
changelog:
  - set cloexec on device descriptor so it doesn't leak to sendmail (#214182)
  - fixed minor bug in initscript (#213683)
  - backported SATA disk detection from upstream


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-2
changelog:
  - kudzu is deprecated, replace it with HAL (#195752)
  - moved later in the boot process so haldaemon is already running
    when drives are being detected


author: Tomas Mraz <tmraz@redhat.com> - 1:5.33-5
changelog:
  - add default /etc/sysconfig/smartmontools file
  - ignore errors on startup (#186130)
  - test drive for SMART support before adding it to smartd.conf


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-3
changelog:
  - add libata disks with -d ata if the libata version
    is new enough otherwise do not add them (#145859, #174095)


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-2
changelog:
  - Spec file cleanup by Robert Scheck <redhat@linuxnetz.de> (#170959)
  - manual release numbering
  - remove bogus patch of non-installed file
  - only non-removable drives should be added to smartd.conf
  - smartd.conf should be owned (#171498)


author: Akira TAGOH <tagoh@redhat.com> - 0.3.2-1
changelog:
  - New upstream release.
    - added an icon. (#199337)
  - removed the unnecessary patches:
    - im-chooser-r49.patch
    - im-chooser-r53.patch


author: Akira TAGOH <tagoh@redhat.com> - 0.3.0-2
changelog:
  - New upstream release.
  - add libgnomeui-devel to BR.
  - im-chooser-suffix-r40.patch: applied to support the recent change
    in the xinput files.


author: Akira TAGOH <tagoh@redhat.com> - 0.2.1-3
changelog:
  - New upstream release.
  - improved the package summary and description.
  - added intltool to BuildReq.
  - added gettext to BuildReq.


author: Akira TAGOH <tagoh@redhat.com> - 0.2.0-1
changelog:
  - New upstream release.
  - use dist tag.
  - registered xinputrc alternatives for none and xim.
  - removed the empty docs.
  - add Requires: xorg-x11-xinit >= 1.0.2-5.fc6 for new xinput.sh.


author: Tomas Mraz <tmraz@redhat.com> - 5.3.19-1
changelog:
  - support new sha256 and sha512 password hash algorithms
  - add support for pam_mkhomedir (#212790)
  - do not crash in authconfig --help (#237956) - thanks to Andy Shevchenko for
    the idea how to fix that
  - setup password hash algorithm in /etc/login.defs (#218652)
  - update translations


author: Tomas Mraz <tmraz@redhat.com> - 5.3.17-1
changelog:
  - remove obsolete pam_krb5afs support (#250704)
  - add support for pam_access (#251360)
  - update translations


author: Tomas Mraz <tmraz@redhat.com> - 5.3.15-1
changelog:
  - dnsclient fixes by Simo Sorce
  - add Categories to .desktop file (#245868)
  - fixed traceback when calling joinDomain (#245374)
  - disable smart card action setting when gnome-screensaver
    not installed (#209643)
  - do not change protocols and services in nsswitch.conf (#236669)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.14-1
changelog:
  - authconfig.8 synopsis fixed (patch by Eric Raymond) (#220574)
  - drop explicit requirement on python version as it is now 
    generated automatically
  - improve writing /etc/samba/smb.conf (based on patch by
    Simo Sorce)
  - merge changes upstream


author: Tomas Mraz <tmraz@redhat.com> - 5.3.13-4
changelog:
  - local nis domain is obtained from sysconfig/network (#235927)
  - set "local authorization is sufficient" on by default


author: Tomas Mraz <tmraz@redhat.com> - 5.3.13-1
changelog:
  - another traceback in --probe and other fixes (#218874)
  - make smbRealm a default realm when appropriate (#219300)
  - added missing languages in LINGUAS


author: Tomas Mraz <tmraz@redhat.com> - 5.3.12-1
changelog:
  - when pam_krb5 auth fails with smartcard login don't enforce it
    in the account stack (#214931)
  - updated translations (#216570)
  - winbind should be added only to user tables (#216862)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.10-1
changelog:
  - fixed passwd PAM stack when PKCS11 enabled (#195960)
  - make authconfig --probe work again (#209676)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.9-1
changelog:
  - updated translations (#207095)
  - correctly write pam_smb.conf with only one server specified (#208365)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.7-1
changelog:
  - improve PAM setup for smart card login
  - support smart card login with kerberos (PKINIT)
  - add pam_pkcs11 to password PAM stack


author: Tomas Mraz <tmraz@redhat.com> - 5.3.6-1
changelog:
  - skip pam_unix for session for crond service
  - fixed a bug in saving when smartcard settings changed (#204838)
  - removed allow_ypbind setsebool as it is now handled in ypbind


author: Tomas Mraz <tmraz@redhat.com> - 5.3.5-1
changelog:
  - improve smart card related UI strings
  - removed possibility to set smart card type from authconfig-gtk
    as only coolkey will be supported for now


author: Ray Strode <rstrode@redhat.com> - 5.3.3-2
changelog:
  - write out new "wait_for_card" config option if we're
    forcing smart card authentication
  - add "use_uid" option to smart card pam_succeed_if line to
    work around bug where pam_succeed_if checks user information
    even in cases where the conditional doesn't depend on it.
  - remove unimplemented "logout" smart card removal action from
    settings
  - remove unnecessary "card_only" argument


author: Tomas Mraz <tmraz@redhat.com> - 5.3.1-1
changelog:
  - screensavers should be authenticated by smartcard too
  - add feature to download a CA certificate for LDAP from 
    an URL (#197103)
  - add pam_keyinit session module to the PAM configuration (#198638)


author: Tomas Mraz <tmraz@redhat.com> - 5.2.5-1
changelog:
  - write ldap servers as URIs and not HOSTs (#191842)
  - fix a typo in --test output
  - updated summary, converted changelog to UTF-8


author: Tomas Mraz <tmraz@redhat.com> - 5.2.4-1
changelog:
  - added crond to the services restarted after firstboot (#187334)
  - when checking nscd status redirect output to /dev/null (#188555)


author: Tomas Mraz <tmraz@redhat.com> - 5.2.2-1
changelog:
  - add try_first_pass option to pam_unix for better integration
    with individual service configurations (#182350)
  - updated translations


author: Tomas Mraz <tmraz@redhat.com> - 5.2.0-1
changelog:
  - redesigned GUI (#178112)
  - added man page for system-config-ac (#179584)
  - disable authentication of system accounts by network services
    by default, added option for changing that (#179009)
  - updated translations, new languages


author: Tomas Mraz <tmraz@redhat.com> - 5.0.4-1
changelog:
  - don't ignore krb5realm command line option (#174838)
  - read dns_lookup_realm and dns_lookup_kdc values correctly
  - the PAM configuration is now written in system-auth-ac file
    which is then symlinked from system-auth, the symlink is not
    overwritten so local PAM configuration is now possible (#165342)


author: Tomas Mraz <tmraz@redhat.com> - 5.0.3-1
changelog:
  - add symlinks to python scripts in sbindir
  - don't override nullok setting from system-auth (#96996)


author: Tomas Mraz <tmraz@redhat.com> - 5.0.2-1
changelog:
  - authinfo-tui.py is now symlink
  - reword the CA certificate message (#154317)
  - use include instead of pam_stack in pam config
  - don't break yp.conf with multiple domains (#127306)


author: Tomas Mraz <tmraz@redhat.com> - 5.0.0-1
changelog:
  - C code completely rewritten in Python
  - some bugs fixed in the process (and no doubt new introduced)
  - TUI deprecated, opens only when run as authconfig-tui


author: Tomas Mraz <tmraz@redhat.com> - 4.6.8-1
changelog:
  - add option for making local authorization sufficient for local users
    this is attempt to 'solve/workaround' the problem with blocking local logins by
    pulling out network cable (#115181)


author: Tomas Mraz <tmraz@redhat.com> - 4.6.7-1
changelog:
  - updated translations
  - winbind in authconfig-gtk.py was setting the nsswitch.conf on the auth tab
  - use GtkComboBox instead of deprecated GtkOptionMenu
  - disable options with not installed binaries, remove unnecessary deps of
    authconfig-gtk


author: Jindrich Novy <jnovy@redhat.com> 4.6.4-5
changelog:
  - fixed all po files to translate correctly messages with modified accelerators (#133742)
  - added translations for Arabic, Bulgarian and other languages (#133716, #133158)


author: Jindrich Novy <jnovy@redhat.com> 4.6.4-2
changelog:
  - modified authconfig-gtk interface to fit lower resolution screens (#127175)
  - modified accelerators in authconfig-gtk (#125797)
  - updated package dependencies (#125306)


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.4-1
changelog:
  - tweak account management to fix #55193 correctly
  - require anything we might want to run in the gui subpackage because it
    doesn't warn about missing things and you don't have a terminal to see
    error messages about missing commands
  - properly display the domain in the GUI join dialog (#124621)


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.3-1
changelog:
  - omit the "ads" or "rpc" when calling "net join", Samba's smarter now (#122802)
  - properly warn about missing "net" (samba-client) and libnss_winbind and
    pam_winbind (samba-common) in text mode (#122802)


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.2-1
changelog:
  - learn all about pam_passwdqc
  - preserve arguments to pam_cracklib and pam_passwdqc
  - short-circuit PAM authorization checks for users with UID < 100
  - remove redhat-config-authentication as a way to invoke the GUI tool (#115977)


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.1-1
changelog:
  - fix man page: --enableldapssl should be --enableldaptls
  - make --enableldapssl an alias for --enableldaptls


author: Nalin Dahyabhai <nalin@redhat.com> 4.6-1
changelog:
  - authconfig-gtk.py: require rhpl, which is required by the script (#104209)
  - both: require usermode (authconfig-gtk transitively), else leave a dangling
    symlink (#104209)
  - the great redhat-config-authentication/system-config-authentication renaming,
    as was foretold in the fedora-config-list archives


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - rework tui to include winbind options. there wasn't enough room in the old
    dialog to include the important options, so the whole thing's been reworked


author: Nalin Dahyabhai <nalin@redhat.com> 4.3.7-1
changelog:
  - authconfig-gtk: condrestart certain additional services if invoked with
    the --firstboot flag (half of #91268, needs cooperating firstboot)
  - translation updates


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add 'redhat-config-authentication' as an alias for authconfig-gtk
  - make authconfig-gtk exec authconfig if gui startup fails and it looks like
    we're connected to a tty


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.10-3
changelog:
  - include the userhelper configuration file
  - require sufficiently-new pam package in the gui subpackage


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.9-1
changelog:
  - add --enable-experimental to enable some of that experimental code
  - add --enable-local to enable local policies
  - update translations


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.8-5
changelog:
  - remove bogus buildrequires left over from when authconfig-gtk was C code
  - buildrequires python-devel in addition to python (to build the python module,
    but we still need python to byte-compile the python script)


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.5-1
changelog:
  - actually free authInfo structures when asked to
  - use pam_krb5's account management facilities
  - conflict with versions of pam_krb5 which don't offer account management


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.4-1
changelog:
  - add python bindings for the back-end
  - redo the gui so that it exercises the python bindings
  - take a shot at getting authconfig to work in a firstboot container


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.3-1
changelog:
  - add some more experimental options
  - clean up the glade files a bit
  - don't destroy a garbage pointer on main cancel, destroy the main dialog


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.2-1
changelog:
  - make setting of experimental options only possible through
    /etc/sysconfig/authconfig, to keep accidents from happening
  - add some more support for experimental stuff


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.1-1
changelog:
  - fix setting of LDAP TLS option in authconfig-gtk
  - change Apply to Ok, Close to Cancel, because that's how they work


author: Nalin Dahyabhai <nalin@redhat.com> 4.2-1
changelog:
  - port to glib2
  - move post code to the back-end
  - add a libglade GUI in a -gtk subpackage
  - set up to use userhelper


author: Tom Lane <tgl@redhat.com> 3.8.2-7.el5_6.7
changelog:
  - Fix incorrect fix for CVE-2011-0192
  Resolves: #688827
  - Add fix for CVE-2011-1167
  Resolves: #688744


author: Tom Lane <tgl@redhat.com> 3.8.2-7.el5.3
changelog:
  - Fix some more LZW decoding vulnerabilities (CVE-2009-2285)
  Resolves: #507725
  - Update upstream URL


author: Tom Lane <tgl@redhat.com> 3.8.2-7.el5.1
changelog:
  - Fix LZW decoding vulnerabilities (CVE-2008-2327)
  Resolves: #458812
  - Remove sgi2tiff.1 and tiffsv.1, since they are for programs we don't ship
  Resolves: #460120


author: Jindrich Novy <jnovy@redhat.com> - 3.8.2-6
changelog:
  - fix CVE-2006-2193, tiff2pdf buffer overflow (#194362)
  - fix typo in man page for tiffset (#186297)
  - use %{?dist}


author: Matthias Clasen <mclasen@redhat.com>
changelog:
  - Fix several vulnerabilities (CVE-2006-3460 CVE-2006-3461
    CVE-2006-3462 CVE-2006-3463 CVE-2006-3464 CVE-2006-3465)


author: Matthias Saou <http://freshrpms.net/> 3.7.4-2
changelog:
  - Remove useless explicit dependencies.
  - Minor spec file cleanups.
  - Move make check to %check.
  - Add _smp_mflags.


author: Matthias Clasen <mclasen@redhat.com> - 3.7.1-3
changelog:
  - Drop the largefile patch again
  - Fix a problem with the handling of alpha channels
  - Fix an integer overflow in tiffdump (#143576)


author: Phil Knirsch <phil@redhat.de>
changelog:
  - Fixed ia64 problem with tiffinfo. Was general 64 bit arch problem where s390x
    and ia64 were missing (#52129).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move man pages from devel package to the regular one
  - integrate Frank Warmerdam's fixed .fax handling code (keep until next release
    of libtiff)
  - fix fax2ps breakage (bug #8345)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - enable zip and jpeg codecs
  - change defattr in normal package to 0755
  - add defattr to -devel package


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.12-20
changelog:
  - Fix ro.map.gz, add ro_std.map.gz, drop ro_win.map.gz,
    add Lat2-Terminus16.psf console font (many thanks to Alexandru Szasz
    <alexxed@gmail.com>)
    Resolves: #294471


author: Miloslav Trmac <mitr@redhat.com> - 1.12-19
changelog:
  - Ship "el" translation instead of the obsolete "gr" translation
    Resolves: #210749
  - Fix % quoting in %changelog


author: Miloslav Trmac <mitr@redhat.com> - 1.12-13
changelog:
  - Fix build with new coreutils
  - Hardcode paths in unicode_start to avoid a few file lookups (#178329)
  - Drop unnecessary Prereq: sed mktemp


author: Miloslav Trmac <mitr@redhat.com> - 1.12-11
changelog:
  - Don't ship character set lists (they are already in glibc-common) and an
    obsolete copy of kbd.FAQ


author: Miloslav Trmac <mitr@redhat.com> - 1.12-5
changelog:
  - Put "Meta_acute" back in German keymaps, just ignore it in (loadkeys -u)
    (patch by Jochen Schmitt)
  - Don't ship patch backup files, simpler way


author: Miloslav Trmac <mitr@redhat.com> - 1.12-4
changelog:
  - Don't ship a patch backup file
  - Mention in setfont.8 that 512-glyph fonts reduce the number of available 
    colors (#140935, patch by Dmitry Butskoj)
  - Remove "Meta_acute" from German keymaps (#143124)
  - Make the %triggerun script condition more precise, ignore failure of the
    script


author: Adrian Havill <havill@redhat.com> 1.08-9
changelog:
  - don't print "plus before..." warnings about non-supported capslock
    in unimode <Andries.Brouwer@cwi.nl> (#81855)


author: Adrian Havill <havill@redhat.com> 1.08-7
changelog:
  - make euro/latin-9 the default instead of latin-1 and 7-bit (#97013)
  - fix swedish keymap; se, not sv (#88791)
  - add fr-latin0 legacy alias of fr-latin-9 (#88324)
  - add ".map" ext to filename param of init script (#90562)


author: Nalin Dahyabhai <nalin@redhat.com> 1.08-2
changelog:
  - only output terminal unicode init sequence if both stdout and stderr are
    connected to terminals, so that it doesn't show up when script outputs
    get piped to files


author: Nalin Dahyabhai <nalin@redhat.com> 1.06-27
changelog:
  - add detached signature
  - remove directory names from PAM configuration so that the same config file
    can be used for any arch on multilib systems


author: Jakub Jelinek <jakub@redhat.com> 1.06-24
changelog:
  - use cyr-sun16 cyrillic chars in latarcyrheb-sun16 font
    instead of old LatArCyrHeb-16 chars
  - add Euro character to latarcyrheb-sun16
  - use latarcyrheb-sun16 by default in unicode_start script


author: Than Ngo <than@redhat.com>
changelog:
  - update to 1.0.6
  - use %{_tmppath}
  - use find_lang
  - support new gettext
  - remove some patch files, which are included in 1.0.6
  - fix to use RPM_OPT_FLAGS


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.05-2
changelog:
  - Build everything, obsoletes console-tools
  - s/Copyright:/License:/
  - License is GPL, not just distributable
  - Add our compose mappings from old console-tools
  - Add triggerpostun -- console-tools magic to get sane fonts and mappings


author: Jindrich Novy <jnovy@redhat.com> 1.9-1
changelog:
  - applied some features proposed by Mike Frysinger (#182219)
  - add mips arch support, add sparc32
  - Obsoletes sparc32
  - add '-h' option to display more comprehensive help
  - add linux64 helper


author: Jindrich Novy <jnovy@redhat.com> 1.8-1
changelog:
  - fix possible segfault when parsing unknown arguments (#161975)
  - print wanings when unknown arguments are passed
  - add FDPIC_FUNCPTRS personality


author: Karel Zak <kzak@redhat.com> 0.1.2-1
changelog:
  - sync with upstream
  - remove dependence on dbus libs
  - fix #211539, #211560 - gnome-applet-vm traceback (virt-manager usage)


author: Karel Zak <kzak@redhat.com> 0.1.0-1
changelog:
  - upgrade to stable upstream release
  - fix build requires
  - fix #205930 - missing dependency for virt-manager


author: Steve Dickson <steved@redhat.com> - 0.3.1-1.1
changelog:
  - Updated to latest upstream version 0.3.1 which eliminated the 
    need for the patches introduced in the previous commit.


author: Tom "spot" Callaway <tcallawa@redhat.com> 0.3.0-1.1
changelog:
  - lose the BR for autotools
  - Patch in support for destdir
  - use %configure macro, make DESTDIR= install
  - add sparc to -fPIE (trivial, but correct)
  - destdir revealed missing/poorly created symlink, patch fixes it, add nfs4_editfacl to files
  - LDFLAGS passed to configure/exported were being blindly overwritten, patch fixes


author: Steve Dickson <steved@redhat.com> - 0.3.0-1
changelog:
  - Updated to latest upstream version 0.3.0
  - Fixed minor issues in spec file from the package review


author: Jens Petersen <petersen@redhat.com> - 3.02-12.el5
changelog:
  - Resolves: rhbz#247729 (zysong font needs to be removed from fonts-chinese.)
    ^^^ remove zysong.ttf from fonts.dir and fonts.scale when upgrading.


author: Caius Chance <cchance@redhat.com> - 3.02-11.el5
changelog:
  - Resolves: rhbz#247729 (zysong font needs to be removed from fonts-chinese.)
  - ^^^ Removed ttmkfdir for misc dir.


author: Caius Chance <cchance@redhat.com> - 3.02-9.9.el5
changelog:
  - Resolves: rhbz#223228
  - bz#223228: LTC31115-Cannot display 4-bytes GB18030 characters on GB18030 
  　locale.


author: Caius Chance <cchance@redhat.com> - 3.02-9.8.el5
changelog:
  - Resolves: rhbz#220985
  - bz#220985: LTC30501-Missing files in Traditional Chinese font support package.
               (Fixed mkfontdir typo error for misc font dir in post section.)


author: Caius Chance <cchance@redhat.com> - 3.02-9.7.el5
changelog:
  - Resolves: rhbz#220985
  - bz#220985: LTC30501-Missing files in Traditional Chinese font support package.


author: Caius Chance <cchance@redhat.com> - 3.02-9.6.el5
changelog:
  - Resolves: rhbz#220291 rhbz#220985
  - bz#220291: It doesn't clean the related folder and files when downgrade or
    remove package. (Regression fix)
  - bz#220985: LTC30501-Missing files in Traditional Chinese font support package.


author: Caius Chance <cchance@redhat.com> - 3.02-9.5.el5
changelog:
  - Resolves: rhbz#220291
  - bz#220291: It doesn't clean the related folder and files when downgrade or
    remove package.


author: Akira TAGOH <tagoh@redhat.com> - 3.02-8
changelog:
  - remove U+2022 to fallback to other fonts so that it's too wide for password
    input. (#216099)
  - add CIDFnmap.zh_* (#215978)


author: Leon Ho <llch@redhat.com> - 3.00.pre1-1
changelog:
  - Move to uMing and uKai with HKSCS and Bitmap glyphs
  - combined FAPIcidfmap.{zh_TW,zh_CN} into FAPIcidfmap.zh


author: Mike A. Harris <mharris@redhat.com> 18-11
changelog:
  - Added procinfo-18-mharris-use-sysconf.patch to use sysconf for determining
    the number of processors online, as this is more portable between different
    CPU architectures than relying on particular /proc file entry contents and
    formatting.  We ship on 7 architectures (x86, ia64, AMD64, ppc, ppc64, s390,
    s390x), and the current code only handled x86, alpha, sparc.  sysconf will
    work on all processors.  Better fix for (#9497)


author: Mike A. Harris <mharris@redhat.com> 18-7
changelog:
  - Removed TODO from doc list as the file isn't present any longer
  - Checked upstream URL, still no package version update.


author: Mike A. Harris <mharris@redhat.com> 18-6
changelog:
  - All-arch rebuild
  - Updated to use {_bindir} et al.
  - Fixed Buildroot: line in specfile to be sensible


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - fix up lsdev (Bug #10295 and a couple of unreported bugs) 
  - fix up calculation of uptime milliseconds (introduced by gcc acting
    differently from previous releases, t/100*100 != t*100/100)
    (Bug #20741)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix uptime calculation (Bug #18673)
    This problem was introduced by gcc acting differently from previous
    releases (t * 100 / HZ --> overflow; t / HZ * 100 ok).


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.2-2
changelog:
  - Add BuildRequires for gtk-doc (closes #192251).
  - Require specific versions of GNU Autotools packages for building.
  - Various spec file cleanups.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.2-1
changelog:
  - Update to 2.7.2
  - Update spec file to run the autotools itself after patching.
  - Remove evolution-exchange-2.7.1-fix_version.patch; fixed upstream.
  - Remove unused or obsolete patches:
    evolution-connector-2.0.2-domain-fix.patch
    evolution-connector-2.7.2-generated-autotool.patch
    ximian-connector-2.1.4-fix-convenience-libraries.patch
    ximian-connector-2.2.2-install-debug-utilities.patch
    ximian-connector-2.2.2-noinst-ltlibraries.patch
  - Add evolution-exchange-2.7.2-no_gnome_common.patch; removes
    GNOME_COMPILE_WARNINGS from configure.in.


author: Matthew Barnes <mbarnes@redhat.com> - 2.7.1-1
changelog:
  - Update to 2.7.1
  - Add some comments about the `plibdir' variable.
  - Add --enable-gtk-doc to the `configure' invocation.
  - Add temporary patch evolution-exchange-2.7.1-fix_version.patch.


author: David Malcolm <dmalcolm@redhat.com> - 2.5.3-1
changelog:
  - 2.5.3
  - regenerate patch 200
  - add patch to use correct marshalling code (patch 300)
  - dropped glob of etspec files


author: David Malcolm <dmalcolm@redhat.com> - 2.5.2-1
changelog:
  - 2.5.2
  - bump evo_major from 2.4 to 2.6
  - bump evolution requirement from 2.4.1 to 2.5.2 to ensure we get an appropriate
    underlying version of evolution
  - regenerate patch 200


author: David Malcolm <dmalcolm@redhat.com> - 2.4.2-1
changelog:
  - 2.4.2
  - regenerate patch 200; forcing regeneration of intltool scripts to 
    keep them in sync with our aclocal/intltool.m4


author: David Malcolm <dmalcolm@redhat.com> - 2.4.1-1
changelog:
  - 2.4.1
  - bump evolution requirement to 2.4.1 and libsoup requirement to 2.2.6.1
  - fix URL to point to 2.4, not 2.3


author: David Malcolm <dmalcolm@redhat.com> - 2.3.8-1
changelog:
  - 2.3.8
  - Regenerated patch 200
  - Add -Werror-implicit-function-declaration to CFLAGS; make it use RPM_OPT_FLAGS


author: David Malcolm <dmalcolm@redhat.com> - 2.3.7-1
changelog:
  - 2.3.7
  - Bump evolution requirement from 2.3.5.1 to 2.3.7
  - Bump libsoup requirement from 2.2.2 to 2.2.5
  - Remove ximian-connector-2.0.4-fix-sync-callback.patch; a slightly modified 
    version of this is now in the upstream tarball (#139393)


author: David Malcolm <dmalcolm@redhat.com> - 2.3.6-2
changelog:
  - bump evo_major from 2.2 to 2.4
  - Removed the various test programs (they no longer exist in the upstream 
    tarball)
  - Renamed more instances of "ximian-connector" to "evolution-exchange" as
    appropriate.


author: David Malcolm <dmalcolm@redhat.com> - 2.3.5-1
changelog:
  - 2.3.5
  - Changed various references to source tarball name from ximian-connector to
    evolution-exchange and updated the URL
  - Remove Patch101 and Patch102 from autotool source patches and regenerate 
    resulting post-autotool patch


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-4
changelog:
  - Install the debug utilities from the "lib" subdirectory; renumber patches 
    accordingly; regenerate the generated patch


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-3
changelog:
  - updated noinst patch: libexchange is now a convenience library again; use -R
  syntax to express path to Evolution's private libraries rather than -Wl since
  libtool cannot properly intrepret the latter; regenerated resulting patch.


author: David Malcolm <dmalcolm@redhat.com> - 2.1.6-1
changelog:
  - Update from unstable upstream 2.1.5 to 2.1.6
  - Require evolution 2.1.6
  - Removed patches for convenience libraries as these are now upstream


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-3
changelog:
  - Patch to fix non-portable usage of convenience libraries; reorganised the hand-edited vs generated patches (generated patch is 990K in size)
  - Add "-Wl" to make arguments to escape usage of -rpath so it is seen by linker, but not by libtool,
  enabling libexchange.la to install below /usr/lib/evolution-data-server-1.2/camel-providers, rather
  than /usr/lib/evolution/2.2


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-2
changelog:
  - Split out the 64-bit acinclude.m4 patch into two patches, one containing the "actual" patch; the other containing all of the regenerated autotool results.
  - Actually apply the 64-bit acinclude.m4 fix this time.


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-1
changelog:
  - Update from stable upstream 2.0.3 to unstable upstream 2.1.4
  - Update evo_major from 2.0 to 2.2
  - Added eds_major definition
  - Require evolution 2.1.4
  - Require libsoup 2.2.2
  - Re-enable s390 architectures
  - Cope with camel-providers now being stored below evolution-data-server, rather than evolution.
  - Remove .a files from camel-providers subdir
  - Removed various docs no longer present


author: David Malcolm <dmalcolm@redhat.com> - 2.0.3-1
changelog:
  - Update from upstream 2.0.2 to 2.0.3
  - The fix for bugs #139134 and #141419 is now in the upstream tarball; removing the patch


author: David Malcolm <dmalcolm@redhat.com> - 2.0.2-1
changelog:
  - Update from 2.0.1 to 2.0.2
  - exclude s390/s390x architecture for now due to Mozilla build problems
  - refresh the autogenerated parts of the 64bit fix patch to patch over the latest version of autogenerated files from upstream


author: David Malcolm <dmalcolm@redhat.com> - 2.0.1-1
changelog:
  - update from 2.0.0 to 2.0.1
  - update required version of evolution from 1.5.94.1 to 2.0.1
  - refresh the autogenerated parts of the 64bit fix patch to patch over the latest version of autogenerated files from upstream


author: David Malcolm <dmalcolm@redhat.com> - 1.5.94.1-1
changelog:
  - update tarball and evolution-version from 1.5.93 to 1.5.94.1
  - convert various occurrences of "1.5" in paths to "2.0" to reflect reorganisations of evolution and the connector
  - refresh the autogenerated parts of the 64bit fix patch to patch over the latest version of autogenerated files from upstream


author: David Malcolm <dmalcolm@redhat.com> - 1.5.93-1
changelog:
  - updated from 1.5.92 to 1.5.93
  - removed patch to compile against Evolution 1.5.93 (no longer needed; also was causing bug #130840)
  - removed patch for LDAP detection
  - added a patch to acinclude.m4 and configure.in to detect and use correct library paths (together with patching the files generated by autotools)


author: Nalin Dahyabhai <nalin@redhat.com> 1.5.92-1
changelog:
  - Require a version of openldap-devel which provides evolution-specific libs.
  - Use the evolution-specific static libraries from openldap-devel, taking into
    account the value of gcc's multidir setting.
  - Set $LIBS before running configure so that libldap's dependencies get pulled
    in and we don't accidentally link against the system-wide copy, which would
    make all of this hoop jumping pointless.
  - Tag translation files as language-specific using %{find_lang}.
  - Update to 1.5.92.
  - Patch to compile against Evolution 1.5.93.


author: David Malcolm <dmalcolm@redhat.com> - 1.5.9-1
changelog:
  - 1.5.9 - first version for the 1.5.* series of Evolution: use revised LDAP detection, fix a build problem in migr-test, use -rpath with evolution 1.5's privlibdir


author: Ondrej Vasik <ovasik@redhat.com> - 3.4-2
changelog:
  - pax no longer fails to create ustar format archive if
    an absolute name is exactly 100 characters long (#239001)


author: Matt Wilson <msw@redhat.com>
changelog:
  - pull PAX source tarball from the SuSE package (which is based off
    this one yet claims copyright on the spec file)


author: Svetoslav Zhelev <Svetoslav.Zhelev.ch> 1.1.2.1-7.slc5
changelog:
  - CernExtension: Use the logger instead of dying
  - CernExtension: Get OCS configuration path through OCS config object


author: Matthias Schroder <Matthias.Schroder@cern.ch> 1.1.2.1-6.slc5
changelog:
  - Remove Ocsinventory/Agent/Backend/IpDiscover/ to avoid bad surprises
  - Drop requirement for nmap
  - CernExtension: Trim the architecture


author: Matthias Schroder <Matthias.Schroder@cern.ch> 1.1.2.1-4.slc5
changelog:
  - Remove Ocsinventory/Agent/Backend/OS/Generic/Users.pm and Processes.pm
  - Change logrotate to weekly, keep 9


author: Remi Collet <Fedora@famillecollet.com> 1.1.2.1-1
changelog:
  - security update for CVE-2009-0667
    http://bugs.debian.org/590879
    http://www.debian.org/security/2009/dsa-1828


author: Remi Collet <Fedora@famillecollet.com> 1.1.2-2
changelog:
  - remove perl-XML-SAX optional dep, which is broken on EL5
    and cause overload when installed on the OCS server


author: Remi Collet <Fedora@famillecollet.com> 1.1-1
changelog:
  - update to 1.1
  - add missing modules.conf
  - new Requires perl(Net::SSLeay), perl(Crypt::SSLeay), smartmontools
  - download URL to launchpad


author: Remi Collet <Fedora@famillecollet.com> 1.0.1-2
changelog:
  - update the README.RPM (new configuration file)
  - change from URL to only servername in config comment


author: Remi Collet <Fedora@famillecollet.com> 0.0.9-1
changelog:
  - update to 0.0.9 finale
  - provides default config to file (need options.patch)
  - add requires nmap (for ipdiscover)
  - add BR perl(XML::SAX) (to avoid install of bundled one)


author: Remi Collet <Fedora@famillecollet.com> 0.0.8.1-0.1.20080217
changelog:
  - update to 0.0.8.1 from CVS
  - change config file used
     from /etc/ocsinventory-agent/ocsinv.conf 
       to /etc/ocsinventory/ocsinventory-agent.cfg


author: Remi Collet <Fedora@famillecollet.com> 0.0.5-0.20070409
changelog:
  - cvs update 20070409
  - create cron.daily file
  - create logrotate.d file
  - create ocsinv.conf
  - cvs update 20070405
  - cvs update 20070403


author: Gary Benson <gbenson@redhat.com>
changelog:
  - make like all the other perl modules we ship (bind to perl version,
    use perl dependency finding scripts, build filelist automatically).
  - include documentation
  - build against perl 5.6.1


author: Solar Designer <solar@owl.openwall.com> 0.7.5-owl1
changelog:
  - Assume invocation by root only if both the UID is 0 and the PAM service
    name is "passwd"; this should solve changing expired passwords on Solaris
    and HP-UX and make "enforce=users" safe.
  - Produce proper English explanations for a wider variety of settings.
  - Moved the "-c" out of CFLAGS, renamed FAKEROOT to DESTDIR.


author: Solar Designer <solar@owl.openwall.com> 0.7.4-owl1
changelog:
  - Documented that "enforce=users" may not always work for services other
    than the passwd command.
  - Applied a patch to PLATFORMS from Mike Gerdts of GE Medical Systems
    to reflect how Solaris 8 patch 108993-18 (or 108994-18 on x86) changes
    Solaris 8's PAM implementation to look like Solaris 9.


author: Solar Designer <solar@owl.openwall.com>
changelog:
  - Build with Sun's C compiler cleanly, from Kevin Steves.
  - Use install -c as that actually makes a difference on at least HP-UX
    (otherwise install would possibly move files and not change the owner).


author: Solar Designer <solar@owl.openwall.com>
changelog:
  - Have the same pam_passwdqc binary work for both trusted and non-trusted
    HP-UX, from Kevin Steves.


author: Solar Designer <solar@owl.openwall.com>
changelog:
  - Use bigcrypt() on HP-UX whenever necessary, from Kevin Steves of Atomic
    Gears LLC.
  - Moved the old password checking into a separate function.


author: Solar Designer <solar@owl.openwall.com>
changelog:
  - Applied minor corrections to the man page and at the same time eliminated
    unneeded/unimportant differences between it and the README.


author: Solar Designer <solar@owl.openwall.com>
changelog:
  - 0.5: preliminary OpenPAM (FreeBSD-current) support in the code and related
  code cleanups (thanks to Dag-Erling Smorgrav).


author: Solar Designer <solar@owl.openwall.com>
changelog:
  - Updated to 0.4:
  - Added "ask_oldauthtok" and "check_oldauthtok" as needed for stacking with
  the Solaris pam_unix;
  - Permit for stacking of more than one instance of this module (no statics).


author: Tim Waugh <twaugh@redhat.com> 2.17-5
changelog:
  - Fix init script (bug #52862).
  - Avoid temporary file vulnerability in init script.
  - Update README: it's --add, not -add.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - pulled into distribution
  - used setserial-2.12_CTI.tgz instead of setserial-2.12.tar.gz (former is
    all that sunsite has) - not sure what the difference is.


author: Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>
changelog:
  - added %attr's
  - added sanity check for RPM_BUILD_ROOT
  - setserial is now installed into /bin, where util-linux puts it and all
    startup scripts expect it.


author: Luke Macken <lmacken@redhat.com> - 0.1.0-3
changelog:
  - Add notify-python-0.1.0-attach_to_status_icon.patch to allow the attaching
    notifications to status icons.


author: Karsten Hopp <karsten@redhat.de> 6.1-1
changelog:
  - update to 6.1 (BLKGETSIZE fixes)
  - work around hdparm's usage of kernel headers, assume
    that we run it on little-endian machines only


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - update to 5.2 with the following fixes:
   - v5.2 compile fixes for 2.5.xx
   - v5.1 fixed segfault in "-i" on older drives
   - v5.0 lots of updates and new features
   - v4.9 fixed compile error with 2.5.xx kernels
   - v4.8 changed -Q to allow specifying queue depth
   - v4.7 added -z, -Q, -M flags; expanded parm range for -p


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - disable readahead (#14268)
  - add comment in /etc/sysconfig/harddisks about possible extra parameters


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Use O_NONBLOCK when opening devices so we can manipulate CD-ROM drives
    with no media inserted, even when running a current kernel (Bug #6457)


author: Eduardo Habkost <ehabkost@redhat.com> - gpxe-0.9.7-8.el5
changelog:
  - Use ExclusiveArch to build the package only on i386 & x86_64
    (BuildArch was not enough to make the build system build only on
    those arches)
  - Use update-alternatives to provide the common /usr/share/qemu-pxe-roms dir
  - Resolves: bz#546606


author: Glauber Costa <glommer@redhat.com> - 0.9.7-7
changelog:
  - Import package from Fedora
  - Move roms to /usr/share/pxe-boot, which is a shared location
    with etherboot
  - Get rid of subpackages not used by RHEL.
  - Set BuildArch, since we can't use the same trick of noarch subpackages
    in RHEL.


author: Alan Cox <alan@redhat.com>
changelog:
  - Added Chris Woods patches as requested by Al Viro to handle modern
    namespace mounting and unmount by mount point not device


author: Martin Stransky <stransky@redhat.com> 1.1.2-3
changelog:
  - Removed event patch, it blocks X events and breaks Adobe pdf plugin
  - Removed event limit in xt_event_polling_timer_callback


author: Martin Stransky <stransky@redhat.com> 1.1.2-1
changelog:
  - updated to 1.1.12
  - added librhythmbox* to ignored plugins (#467187)
  - removed debug prints (#467090)


author: Warren Togami <wtogami@redhat.com> 1.1.0-10
changelog:
  - Revert libcurl requires because it was done in an incorrect way
  - Revert patch from -7 because it made things worse


author: Martin Stransky <stransky@redhat.com> 0.9.91.5-23
changelog:
  - merged exclude patch with main tarball
  - fixed #431095 - Typo in mozilla-plugin-config verbose output


